Influence of laser fluence on plasma dynamics and the structural, optical, and electrical properties of CuI thin films deposited by pulsed laser ablation
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (53)
Show source-provided references
1. Analysis of electronic and optical properties of copper iodide (γ-CuI) by TB – mBJ method – a promising optoelectronic material10.1016/j.vacuum.2019.01.047 ↗
2. Exploring the photocatalytic potential of copper iodide thin films deposited via multiple spray technique10.1016/j.apsadv.2023.100570 ↗
3. Investigations on the CuI thin films production by pulsed laser deposition10.1016/j.apsusc.2022.154868 ↗
4. The properties of copper (I) iodide (Cul) thin films prepared by mister atomizer at different doping concentration10.1016/j.proeng.2013.03.186 ↗
5. Control of optical absorption and emission of sputtered copper iodide thin films10.1002/pssr.202000431 ↗
6. Room-temperature domain-epitaxy of copper iodide thin films for transparent CuI/ZnO heterojunctions with high rectification ratios larger than 109
7. High mobility, highly transparent, smooth, p -type CuI thin films grown by pulsed laser deposition10.1063/5.0021781 ↗
8. Transparent flexible thermoelectric material based on non-toxic earth-abundant p-type copper iodide thin film
9. Deposition of copper iodide thin films by chemical bath deposition (CBD) and successive ionic layer adsorption and reaction (SILAR) methods10.1016/j.cap.2013.05.014 ↗
10. Electrochemical preparation of photoelectrochemically active CuI thin films from room temperature ionic liquid10.1016/j.electacta.2012.01.044 ↗
11. Cathodic electrochemical deposition of CuI from room temperature ionic liquid-based electrolytes10.1016/j.elecom.2015.06.016 ↗
12. The structural and optical properties of metallic doped copper (I) iodide thin films synthesized by SILAR method10.1016/j.materresbull.2017.06.032 ↗
13. Optical and electrochemical capacitive properties of copper (I) iodide thin film deposited by SILAR method10.1016/j.arabjc.2017.01.008 ↗
14. High-performance flexible transparent p-CuI film by optimized solid iodization10.1016/j.vacuum.2020.109862 ↗
15. Thermal evaporated CuI film thickness-dependent performance of perovskite solar cells10.1016/j.vacuum.2021.110076 ↗
16. Sputter-Deposited copper iodide thin film transistors with low Operating voltage
17. Promising transparent and flexible thermoelectric modules based on p-type CuI thin films—a review10.1016/j.egyr.2022.09.020 ↗
18. Transparent conductive CuI thin films prepared by pulsed laser deposition
19. Understanding pulsed laser deposition process of copper halides via plasma diagnostics techniques10.1063/5.0077082 ↗
20. Influence of the substrate temperature on the formation of CuSbSe2 thin films grown by pulsed laser deposition10.1016/j.ceramint.2022.08.092 ↗
21. Plasma emission spectroscopy for studying Bi2S3 produced by pulsed laser deposition and effects of substrate temperature on structural, morphological, and optical properties of thin films10.1016/j.mseb.2024.117867 ↗
22. Hybrid magnetron sputtering and pulsed laser ablation for the deposition of composite ZnO-Au films10.1016/j.tsf.2019.06.006 ↗
23. Diagnostics of laser ablated plasma plumes10.1016/j.tsf.2003.11.137 ↗
24. Characterization of laser induced plasmas by optical emission spectroscopy: a review of experiments and methods10.1016/j.sab.2008.05.010 ↗
25. Plasma emission spectroscopy to study the resputtering produced by pulsed laser deposition of Au and in combination with magnetron sputtering of ZnO10.1109/TPS.2021.3088067 ↗
26. Electron density and temperature measurements in a laser produced carbon plasma carbon plasma10.1063/1.366276 ↗
27. Complementary characterization of laser-induced plasmas by optical emission spectroscopy and triple Langmuir probe10.1109/TPS.2019.2951392 ↗
28. Optical emission spectroscopy characteristics of chromium plasma parameters10.1007/s12596-023-01336-1 ↗
29. Characterization of laser-ablation plasmas10.1088/0953-4075/32/14/201 ↗
30. Luminescence properties and mechanisms of CuI thin films fabricated by vapor iodization of copper films10.3390/ma9120990 ↗
31. Internal structure and expansion dynamics of laser ablation plumes into ambient gases10.1063/1.1544070 ↗
32. CuI p-type thin films for highly transparent thermoelectric p-n modules
33. Substrate temperature effect of CdTe films grown by PLD on photovoltaic properties of CdS/CdTe solar cells, CCE 2022 - 2022 19th
34. Raman scattering from CuBr and CuI10.1016/0038-1098(73)90615-7 ↗
35. Pressure and temperature dependence of the Raman phonons in isotopic γ-CuI10.1103/PhysRevB.66.245202 ↗
36. Decay mechanism of optical phonons in γ -CuI10.1063/1.5087172 ↗
37. Close space sublimation growth of single-phase CuI thin films: evaluation of structural and electronic properties10.1063/5.0224722 ↗
38. The Raman effect in crystals10.1080/00018736400101051 ↗
39. p-Type LaCuOS films grown by PLD using a quaternary target fabricated by a two-step solid-state reaction/sulfurization process10.1016/j.mseb.2023.117063 ↗
40. Characterization of transparent conducting CuI thin films prepared by pulsed laser deposition technique10.1016/S0009-2614(02)01590-7 ↗
41. Fabrication of P-type transparent conducting CuxZn1-xS films on glass substrates with high conductivity and optical transparency10.1016/j.jallcom.2018.03.402 ↗
42. Influence of deposition temperature and fluorine doping on CdS properties: exploring applications in CdTe solar cells10.1016/j.mseb.2024.117646 ↗
43. Thermal evaporated Copper Iodide (CuI) thin films: a note on the disorder evaluated through the temperature dependent electrical properties10.1016/j.solmat.2017.02.030 ↗
44. Characterization of CuI thin films prepared by different techniques10.1016/S0254-0584(02)00547-3 ↗
45. On the correlation of crystal defects and band gap properties of ZnO nanobelts10.1007/s00339-011-6554-2 ↗
46. Transparent p-CuI/n-ZnO heterojunction diodes10.1063/1.4794532 ↗
47. Excess iodine as the interface recombination center limiting the open-circuit voltage of CuI-based perovskite planar solar cell10.1007/s10854-018-8901-y ↗
48. The role of sulfur in sulfur-doped copper(I) iodide p-type transparent conductors10.1016/j.matt.2023.10.003 ↗
49. Cuprous iodide - a p-type transparent semiconductor: history and novel applications
50. Structural and DC electrical properties of (CuI) thin film prepared by pulse laser deposition10.30684/etj.34.4B.8 ↗
51. Optoelectronic properties and ultrafast carrier dynamics of copper iodide thin films
52. High-performance p-channel transistors with transparent Zn doped-CuI
53. Intrinsically p-type cuprous iodide semiconductor for hybrid light-emitting diodes10.1038/s41598-020-61021-2 ↗