Improvement effect of carbonation curing on the performance of lightweight calcium carbide slag cement-based materials under the coupled action of sulfate attack and dry-wet cycling
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
References (65)
Show source-provided references
1. New sights in early carbonation of calcium silicates: performance, mechanism and nanostructure10.1016/j.conbuildmat.2021.125622 ↗
2. Performance degradation of CO2 cured cement-coal gangue pastes with low-temperature sulfate solution immersion
3. Effect of temperature on CO2 curing, compressive strength and microstructure of cement paste
4. CO2 mineralization of cement-based materials by accelerated CO2 mineralization and its mineralization degree: a review10.1016/j.conbuildmat.2024.137712 ↗
5. New insights into the early stage nucleation of calcium carbonate gels by reactive molecular dynamics simulations10.1063/5.0127240 ↗
6. Surface application of multifunctional compound to prevent and control combined chloride and carbonation corrosion in concrete10.1080/19648189.2023.2197484 ↗
7. Reinforcing the physicochemical properties of concrete through synergism of CO2 curing and Ca(OH)2 solution drenching10.1016/j.conbuildmat.2021.122546 ↗
8. Experimental study on effects of CO2 concentrations on concrete carbonation and diffusion mechanisms10.1016/j.conbuildmat.2015.06.007 ↗
9. Microstructural phase evolution and strength development of low-lime calcium silicate cement (CSC) paste incorporating ordinary portland cement under an accelerated carbonation curing environment
10. Rapid hardening of ternesite and microstructural changes activated by carbonation curing and ye'elimite10.1016/j.cemconres.2023.107394 ↗
11. Multiscale performance and environmental impact assessment of slag and portland blended cement for optimum carbonation curing10.1016/j.cement.2023.100088 ↗
12. Recycling and utilization of calcium carbide slag - current status and new opportunities10.1016/j.rser.2022.112133 ↗
13. Mechanochemical synthesis of oxygenated alkynyl carbon materials with excellent Hg(II) adsorption performance from CaC2 and carbonates
14. Towards carbon neutrality of calcium carbide-based acetylene production with sustainable biomass resources
15. Physicochemical characterizations and desulfurization properties in coal combustion of three calcium and sodium industrial wastes10.1021/ef8007568 ↗
16. Enhancement in compressive strength of carbide slag activated ground granulated blast furnace slag by introducing CaCl2 and NaCl10.1016/j.conbuildmat.2023.131071 ↗
17. Comprehensive performance study of aluminum ash and calcium carbide slag for brick making under ultra-high pressure10.1016/j.conbuildmat.2022.129526 ↗
18. Carbonation curing of precast Fly ash concrete10.1061/(ASCE)MT.1943-5533.0001649 ↗
19. Recycling of waste autoclaved aerated concrete powder in portland cement by accelerated carbonation10.1016/j.wasman.2019.04.018 ↗
20. Influence of mineral admixtures on carbonation curing of cement paste10.1016/j.conbuildmat.2019.04.033 ↗
21. Carbonation curing influencing factors of carbonated reactive magnesia cements (CRMC) – a review
22. Study on preparation and performance of calcium carbide slag foam for coal mine disaster reduction and CO2 storage10.1016/j.colsurfa.2020.125322 ↗
23. Preparation and performances of foamed hydraulic lime10.1016/j.conbuildmat.2021.123244 ↗
24. Effect of carbonation and foam content on CO2 foamed concrete behavior10.1016/j.jmrt.2023.02.178 ↗
25. Silica extraction from rice husk: comprehensive review and applications10.1016/j.hybadv.2023.100111 ↗
26. Recycling of raw rice husk to manufacture magnesium oxysulfate cement based lightweight building materials10.1016/j.jclepro.2018.04.238 ↗
27. Production of new generation and sustainable concrete using rice husk ash (RHA): a review10.1016/j.matpr.2023.06.034 ↗
28. Thermochemical pretreatments to improve the fuel properties of rice husk: a review
29. Recycling of rice husk waste for a sustainable concrete: a critical review10.1016/j.jclepro.2021.127734 ↗
30. Preparation and performance investigation of carbonation curing lightweight calcium carbide slag cement-based materials
31. Effect of carbonation curing on the characterization and properties of steel slag-based cementitious materials10.1016/j.cemconcomp.2024.105769 ↗
32. Durability of concrete containing carbonated recycled aggregates: a comprehensive review
33. Influence of freeze-thaw cycles on capillary absorption and chloride penetration into concrete10.1016/j.cemconres.2017.05.018 ↗
34. Effect of air entrainment on the mechanical properties, chloride migration, and microstructure of ordinary concrete and Fly ash concrete10.1061/(ASCE)MT.1943-5533.0002456 ↗
35. Optimizing quaternary chemical additives and steel fiber dispersion in CSA cement-based HPC for rapid repair engineering10.1016/j.conbuildmat.2025.142265 ↗
36. Macro-microscopically numerical analysis on expansion response of hardened cement paste under external sulfate attack10.1016/j.conbuildmat.2019.02.159 ↗
37. Comparison study on the sulfate attack resistivity ofcement-based materials modified with nanoSiO2 and conventional SCMs: mechanical strength and volume stability10.1016/j.conbuildmat.2019.03.235 ↗
38. Performance and ITZ of pervious concrete modified by vinyl acetate and ethylene copolymer dispersible powder10.1016/j.conbuildmat.2019.117532 ↗
39. Influence of the Ca/Si ratio of the C-S-H phase on the interaction with sulfate ions and its impact on the ettringite crystallization pressure10.1016/j.cemconres.2014.12.002 ↗
40. Effects of gypsum formation on the performance of cement mortars during external sulfate attack10.1016/S0008-8846(02)00955-9 ↗
41. Deterioration mechanism of plain and blended cement mortars partially exposed to sulfate attack10.1016/j.conbuildmat.2017.08.017 ↗
42. Influence of magnesium sulphate concentration on durability of concrete containing micro-silica, slag and limestone powder using durability index10.1016/j.conbuildmat.2016.04.091 ↗
43. Multi-scale analysis of degradation mechanisms in magnesium phosphate cement paste under wet-dry cycling
44. Degradation mechanisms and lifespan prediction of desert sand dry-mixed mortar under sulfate salt wet-dry cycles
45. Review on carbonation curing of cement-based materials10.1016/j.jcou.2017.07.003 ↗
46. Influence of CO2 curing and autoclaved aerated concrete powder on sulfate attack of cement paste at low temperature10.1061/(ASCE)MT.1943-5533.0004729 ↗
47. Effect of carbonation curing on sulfate resistance of cement-coal gangue paste10.1016/j.jclepro.2020.123897 ↗
48. Decoupling chemical and physical sulfate attack on OPC and L. Sac concrete under wet-dry cycles
49. Mechanical strength and water resistance of magnesium oxysulfate cement based lightweight materials10.1016/j.cemconcomp.2020.103554 ↗
50. Effect of wetting–drying cycles on compressive strength and microstructure of recycled asphalt pavement–Fly ash geopolymer10.1016/j.conbuildmat.2017.03.243 ↗
51. Physical and functional characteristics of foam concrete: a review10.1016/j.conbuildmat.2019.06.052 ↗
52. Optimization on hydration efficiency of an all-solid waste binder: carbide slag activated excess-sulphate phosphogypsum slag cement
53. Effects of early-age carbonation curing on the properties of cement-based materials: a review
54. Carbonation resistance of Fly ash and blast furnace slag based geopolymer concrete10.1016/j.conbuildmat.2017.12.127 ↗
55. Progress in the research of carbonation resistance of RAC10.1016/j.conbuildmat.2019.116976 ↗
56. Under sulfate dry–wet cycling: exploring the symmetry of the mechanical performance trend and grey prediction of lightweight aggregate concrete with silica powder content10.3390/sym16030275 ↗
57. Investigation on the effect of seawater condition, sulphate attack, acid attack, freeze–thaw condition, and wetting–drying on the geopolymer concrete
58. Utilization of the black tea powder as multifunctional admixture for the hemihydrate gypsum10.1016/j.jclepro.2018.10.304 ↗
59. Environmental and durability perspective of the use of curaua fiber treated in mortars10.32604/jrm.2022.020503 ↗
60. Numerical simulation of cementitious materials degradation under external sulfate attack10.1016/j.cemconcomp.2009.12.005 ↗
61. Behaviour of foam concrete under sulphate environments10.1016/j.cemconcomp.2012.03.007 ↗
62. Microstructural changes induced in portland cement-based materials due to natural and supercritical carbonation10.1007/s10853-008-2521-5 ↗
63. Microstructural insight into the deterioration mechanism of the mortar subject to the combined action of external sulfate attack and cyclic wetting–drying10.1016/j.conbuildmat.2021.125484 ↗
64. Effects of alkali dosage and silicate modulus on autogenous shrinkage of alkali-activated slag cement paste10.1016/j.cemconres.2020.106322 ↗
65. Mechanism of pore structure on carbonation properties of cement with high carbon fixation capacity10.1016/j.conbuildmat.2025.139919 ↗