The importance of wood relaxation when studying nail withdrawal capacity
Source abstract
Abstract
Nails are among the most widely utilised fasteners in timber construction. Nail withdrawal capacity (NWC) has been extensively studied; however, the specific mechanisms by which moisture affects NWC remain unclear. In addition, the effects of wood relaxation on NWC in durability studies are often overlooked, introducing potential errors. This study assessed the impacts of wood moisture content (MC) and relaxation on NWC, with investigations on potential affecting mechanisms. The key innovation of this study lies in the mechanistic explanation of NWC changes using Coulomb’s Law of Friction, supported by microscopy-based characterisation of the wood–nail interface. Smooth-shank nails driven into radiata pine conditioned to 9 %, 12 %, and 18 % MC were tested up to 28 days after driving. Affecting mechanisms were investigated using stress relaxation tests, confocal microscopy, and scanning electron microscopy (SEM). NWC was significantly reduced by 41 % and 44 % 28 days after driving at 9 % and 12 % MC (n = 30), respectively. In contrast, NWC increased by 11 % at 18 % MC. The time required to stabilise NWC in all conditions was 14 days. Stress relaxation tests, confocal microscopy, and SEM results suggest the NWC losses at 9 % and 12 % MC were caused by wood relaxation, while the increase at 18 % MC might be attributed to softer wood fibres, suspected metal oxidation or corrosion, or trapped wood fibres on the nail surfaces. These findings not only clarify the mechanisms driving NWC changes but also highlight the importance of accounting for wood relaxation in experimental design and durability assessment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Recycling of landfill wastes (tyres, plastics and glass) in construction – a review on global waste generation, performance, application and future opportunities
2. In-situ 4D CT analysis of microcrack evolution in carbonated fiber-reinforced recycled aggregate concrete
3. Meso-structural insights into post-peak behaviors of micro steel fiber-reinforced recycled aggregate concrete using in-situ 4D CT and DVC techniques
4. F. Ximenes, M. Robinson, B. Wright, Forests, Wood and Australia’s Carbon Balance, 2006. doi: 10.13140/RG.2.1.3297.4886.
5. J. Švajlenka and T. Pošiváková, Optimizing Construction Management. Cham, Switzerland, 2025. doi: 10.1007/978-3-031-84327-3.10.1007/978-3-031-84327-3 ↗
6. Assessment of the failure behaviour and reliability of timber connections with multiple dowel-type fasteners10.1016/j.engstruct.2018.05.081 ↗
7. Standards Australia Limited, Timber design handbook, Standards Australia Limited, 2013. [Online]. Available: 〈https://au.i2.saiglobal.com/management/display/index/0/1261960/-/6e3985728c2868ee2c45d180f47771b9〉.
8. Task Committee on Fasteners · 1996
9. Effect of moisture content of wood on structural performance of nailed joints10.2472/jsms.65.354 ↗
10. L. Yermán, Y. Zhang, J. He, M. Xiao, L.M. Ottenhaus and J.J. Morrell, Effect of wetting and fungal degradation on performance of nailed timber connections, Constr. Build. Mater., vol. 353, no. September, 2022, doi: 10.1016/j.conbuildmat.2022.129113.10.1016/j.conbuildmat.2022.129113 ↗
11. Review of literature on the effects of early stages of decay on wood strength
12. A review of the long-term effects of humidity on the mechanical properties of wood and wood-based products10.1007/s00107-021-01665-7 ↗
13. A review on the mechanical properties of aged wood and salvaged timber10.1016/j.conbuildmat.2016.04.001 ↗
14. Effect of repeated wetting and drying on withdrawal capacity and corrosion of nails in treated and untreated timber10.1016/j.conbuildmat.2021.122878 ↗
15. Influence of repeated wetting and drying on withdrawal capacity of wooden nails and metal nails
16. Effect of wetting and fungal degradation on the withdrawal capacity of stainless-steel screws in radiata pine10.1007/s00107-023-01988-7 ↗
17. Wood nails to fix softwoods: characterization of structural deformation and lignin modification10.1007/s00107-018-1288-x ↗
18. Friction between wood and steel in the embedment area of timber connections
19. A theoretical model developed for predicting nail withdrawal load from wood by mechanics10.1007/s00107-017-1227-2 ↗
20. Time dependent moisture driven backout of nailplates: experimental investigations and numerical predictions10.1007/s00107-021-01735-w ↗
21. Effect of moisture cycling on truss-plate joint behaviour
22. Evaluating dimensional stability in solid wood: a review of current practice10.1186/s10086-019-1817-1 ↗
23. Forest Products Laboratory, Wood Handbook: Wood as an Engineering Material, Madison, Wisconsin, USA, 2010. doi: 10.2737/FPL-GTR-190.10.2737/FPL-GTR-190 ↗
24. Friction of wood sliding on various Materials
25. Metal corrosion in wood joint products and structures: a review
26. Withdrawal resistance of plain and galvanized-steel nails during changing moisture content conditions
27. On the numerical assessment of bending- and torsion-induced stresses in idealised sawn timber beams10.1080/17480272.2024.2374397 ↗
28. Rheological behavior of wood in stress relaxation under compression10.1007/s00226-018-0993-2 ↗
29. Experimental study of the mechanosorptive behaviour of softwood in relaxation10.1007/s00226-016-0816-2 ↗
30. Design axial withdrawal strength from wood: II. Plain-shank common wire nails
31. Nail withdrawal strength of Chinese fir dimension lumbers
32. E.P. Lhuede, Side and end grain withdrawal loads for single nails in Australian timber species. Highett, Melbourne, Victoria: Commonwealth Scientific and Industrial Research Organization, Division of Building Research, 1985. [Online]. Available: 〈https://catalogue.nla.gov.au/catalog/1690809〉.
33. Micromechanics of creep and relaxation of wood. A review. Cost action E35 2004-2008: wood machining - micromechanics and fracture10.1515/HF.2009.013 ↗
34. Experimental study on the short-term stress relaxation response of Chilean radiata pine10.1007/s00226-022-01380-3 ↗
35. ASTM International, Standard Test Methods for Mechanical Fasteners in Wood and Wood-Based Materials, Conshohocken, USA, 2020. doi: 10.1520/D1761-20.10.1520/D1761-20 ↗
36. NSPRC · 2022
37. British Standards Institution, Timber Structures — Test methods — Withdrawal capacity of timber fasteners BS EN 1382:2016, 2016. [Online]. Available: 〈https://bsol-bsigroup-com.ap1.proxy.openathens.net/Bibliographic/BibliographicInfoData/000000000030297196〉.
38. Standards Australian, AS1649-2001 Timber—Method of test for mechanical fasteners and connectors—Basic working loads and characteristic strengths, 2001.
39. “Effects of salinity on the nail-holding power of dimension lumber used in light-frame wood building,”10.1007/s11676-015-0118-9 ↗
40. Effects of decay on the mechanical properties of nailed joints in light wood frame structure
41. Standards Australia, AS/NZS 1748.1 Timber - Solid - Stress-graded for structural purposes, Sydney, NSW, 2011. [Online]. Available: h〈ttps://au.i2.saiglobal.com/management/display/index/0/894876/-/81465c14dec07f659b4a4d5fcb8c916a〉.
42. ASTM International, Standard test methods for direct moisture content measurement of wood and wood-base materials - D4442-20, vol. 92, no. December, pp. 1–6, 2007, doi: 10.1520/D4442-20.10.1520/D4442-20 ↗
43. Compressive strength of beech and birch at different moisture contents and temperatures10.1007/s10853-023-08882-w ↗
44. Determination of coefficients of friction for laminated veneer lumber on steel under high pressure loads10.1007/s40544-020-0377-0 ↗
45. J.E. Reeb, Wood and moisture relationships, Corvallis, Oregon, USA, 1995. [Online]. Available: 〈https://ir.library.oregonstate.edu/downloads/td96k297v〉.
46. Requirements for a model that exhibits mechano-sorptive behaviour10.1007/BF00355737 ↗
47. The frictional behaviour of wood10.1007/BF00394962 ↗
48. Wood friction characteristics during exposure to high pressure: influence of wood/metal tool surface finishing conditions10.1007/s10086-012-1295-1 ↗
49. Wood moisture-induced swelling at the cellular scale-Ab intra10.3390/f10110996 ↗