journal article·2026-07-25

Practical Near-Field Illuminance Simulation for Visual Inspection Using Novel Method

Amin Khakpour Komarsofla, Meaghan Charest-Finn, Scott Nokleby, Joshua K. Pickard

Applied Sciences· Volume 16· Issue 15
Publisher page

Abstract

Near-field direct illumination from extended luminaires presents a fundamental modeling challenge in automated visual inspection: standard far-field IES (Illuminating Engineering Society) photometric data treat luminaires as point sources, an assumption that breaks down when source-to-target distances are comparable to luminaire dimensions. This paper addresses this breakdown by establishing, both analytically and experimentally, the conditions under which IES-based point-source discretization remains valid and the minimum discretization required when it does not. A solid-angle-based illuminance formulation on triangular meshes is coupled with a controlled virtual-emitter discretization of elongated luminaires, and a reproducible selection workflow is derived that relates emitter count to the source–target distance ratio and a specified error criterion. The dependence of discretization requirements on source–target distance is characterized by an angular-subtense argument, yielding the scaling relation N∼(L/H)·C, where L is the luminaire length, H the working distance, and C a constant determined by the IES angular gradient and the required accuracy. Validation experiments with one and two industrial linear luminaires (1.2 m, Banner Engineering WLS15xDW1200Dx) include single-luminaire heights of H=20cm, 25cm, 35cm, 50cm, and 60cm, as well as effective-length reduction cases produced by opaque end masking at H=35cm. The single-luminaire validation set compares N=1–7 virtual emitters for all cases, with the H=20cm case extended to N=9. The selected emitter counts are chosen as the best-performing candidate simulations after considering scalar error, smoothness, and profile consistency. The selected uncovered cases are N=9 at H=20cm, N=7 at H=25cm, N=5 at H=35cm, and N=3 at H=50–60cm. The masked-source experiments confirm that reducing the effective source length at fixed height reduces the required emitter count. The fitted selection relation developed from these cases indicates that the working distance H has the stronger influence within the tested range. The method provides a computationally efficient, practitioner-ready tool for inspection-lighting design when near-field goniophotometry or optical ray tracing is unavailable.
Source: crossref · Quality: baseline

Affiliations

Department of Automotive and Mechatronics Engineering, Ontario Tech University, Oshawa, ON L1G 0C5, Canada

Eigen Innovations Inc., Fredericton, NB E3B 1S1, Canada

Funding

Mitacs

References (33)

Show source-provided references
1. Commission Internationale de l’Éclairage (CIE) (1987). CIE 070-1987: The Measurement of Absolute Luminous Intensity Distributions, CIE.
2. Commission Internationale de l’Éclairage (CIE) (1996). CIE 121-1996: The Photometry & Goniophotometry of Luminaires, CIE.
3. Illuminating Engineering Society (2019). ANSI/IES LM-75-19: Approved Method: Guide to Goniometer Measurements and Types, and Photometric Coordinate Systems, IES.
4. Ohno, Y. (2014, January 23–27). Overview of Near-Field Goniophotometry and Its Applications. Proceedings of the CIE Conference, Budapest, Hungary.
5. The usefulness of near-field goniophotometry data to assess illuminances and discomfort glare in indoor lighting10.1080/15502724.2021.1925129 ↗
6. Komarsofla, A.K., Charest-Finn, M., and Nokleby, S. (2023, January 28–31). Autonomous Inspection of Steel Pipe Weld Lines Implementing Frequency Analysis Combined with YOLOv5. Proceedings of the Canadian Society for Mechanical Engineering International Congress, Sherbrooke, QC, Canada.10.17118/11143/20929 ↗
7. García-Chamizo, J.M., Fuster-Guilló, A., and Azorín-López, J. (2007). Simulation of automated visual inspection systems for specular surfaces quality control. Proceedings of the Pacific-Rim Symposium on Image and Video Technology, Springer.10.1007/978-3-540-77129-6_64 ↗
8. Kuric, I., Klarák, J., Bulej, V., Sága, M., Kandera, M., Hajdučík, A., and Tucki, K. (2022). Approach to automated visual inspection of objects based on artificial intelligence. Appl. Sci., 12.10.3390/app12020864 ↗
9. Automated optical inspection system for surface mount device light emitting diodes10.1007/s10845-016-1270-6 ↗
10. Fusion of multi-light source illuminated images for effective defect inspection on highly reflective surfaces10.1016/j.ymssp.2022.109109 ↗
11. Parrott, E., Pickard, J.K., and Dubay, R. (2023). Synthesis of Valid Camera Poses for the Inspection of Triangular Facets in a 3D Mesh. Sensors, 23.10.3390/s23187878 ↗
12. Parrott, E., Pickard, J.K., and Dubay, R. (2023). Practical Applications of a Set-Based Camera Deployment Methodology. Sensors, 24.10.3390/s24010111 ↗
13. Computer Vision Techniques in Manufacturing10.1109/TSMC.2022.3166397 ↗
14. State of the Art in Defect Detection Based on Machine Vision10.1007/s40684-021-00343-6 ↗
15. A Systematic Review of Machine Vision Applications in Factory and Manufacturing Processes: From Quality Control to Predictive Diagnostics10.1007/s40684-025-00769-2 ↗
16. Illuminating Engineering Society of North America (2002). IESNA Standard File Format for the Electronic Transfer of Photometric Data, IESNA. (ANSI IESNA LM-63-02).
17. Solid angle sampling of disk and cylinder lights10.1111/cgf.12946 ↗
18. Galatanu, C.D., and Gherasim, I. (2020). Spatial Light Source Simulations for Near Field Reflections. Proceedings of the 11th International Conference on Electrical and Power Engineering (EPE), IEEE.10.1109/EPE50722.2020.9305546 ↗
19. LED Beam Shaping Lens Based on the Near-Field Illumination10.1364/OE.17.023449 ↗
20. LED light design method for high contrast and uniform illumination imaging in machine vision10.1364/AO.57.001694 ↗
21. Simulation of a machine vision system for reflective surface defect inspection based on ray tracing10.1364/AO.385486 ↗
22. Design of a composite lighting system based on a freeform and a rod lens for machine vision10.1364/AO.449810 ↗
23. Rectangular illumination method using LED arrays for machine vision10.1364/AO.384833 ↗
24. Designing light-emitting diode arrays for uniform near-field irradiance10.1364/AO.45.002265 ↗
25. Illuminating Engineering Society (2019). ANSI/IES LM-79-19: Optical and Electrical Measurements of Solid-State Lighting Products, IES.
26. Commission Internationale de l’Éclairage (CIE) (2015). CIE S 025/E:2015 Test Method for LED Lamps, LED Luminaires and LED Modules, CIE.
27. The solid angle of a plane triangle10.1109/TBME.1983.325207 ↗
28. Craig, J.J. (2006). Introduction to Robotics, Pearson Education International. [3rd ed.].
29. Komarsofla, A.K., Charest-Finn, M., Nokleby, S., and Pickard, J. (2024). A practical method for realistic simulation of non-point light sources in commonly used computer graphics softwares. Proceedings of the 2024 IEEE International Systems Conference (SysCon), IEEE.10.1109/SysCon61195.2024.10553429 ↗
30. (2023, December 25). Banner Engineering. WLS15xDW1200Dx. Available online: https://www.bannerengineering.com.
31. LATNEX Corporation (2023). LM-50KL Lux Meter: User Manual, LATNEX Corporation.
32. Illuminating Engineering Society (2020). ANSI/IES LM-80-20: Measuring Luminous Flux and Color Maintenance of LED Packages, IES.
33. Komarsofla, A.K., Charest-Finn, M., Nokleby, S., and Pickard, J.K. (2026). FASTVIS: A Lightweight and Hybrid-Compatible Method for Occlusion Detection in 3D Meshes Using Spherical Geometry. Proceedings of the 2026 IEEE International Systems Conference (SysCon), IEEE.10.1109/SysCon66367.2026.11503500 ↗