Segregation behavior of alloying elements and its effects on stacking fault of γ′ phase in Ni-based superalloys: First-principles study
Source abstract
Abstract
Abstract In this paper, the segregation tendency of elements M (Re, Co, Cr, Mo, Ti) near the complex and intrinsic stacking fault (CSF and SISF) on γ′- Ni3Al (111) plane as well as the influence of the segregation on the mechanical properties were studied by the first-principle method. The results show that Co and Cr atoms tend to segregate to CSF and Co also has segregation tendency for SISF. Comparison of metallic radius of alloying element can predict preliminary the segregation tendency which decreases along with the increase of metallic radius of M, except for Re. Segregation of M depends on their strong interactions with their surrounding Ni atoms near SFs, rather than the minimization of elastic strain. In addition, the Re effect is not induced by its interaction with the two SFs in γ′ phase. Meanwhile, the effects of segregated elements Co and Cr on the mechanical properties are further discussed. The results show that segregation of the two elements to CSF results in higher interfacial stability and the improvement of plastic deformation ability, but Co near SISF is beneficial to increase work-hardening. This work will provide insight for the composition design and improvement of processing technology of Ni-based superalloys and even other alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Deformation and damage mechanisms during thermal–mechanical fatigue of a single-crystal superalloy10.1016/j.actamat.2009.01.027 ↗
2. Damage accumulation during creep deformation of a single crystal superalloy at 1150℃, Materials Science and Engineering10.1016/j.msea.2006.11.101 ↗
3. The formation of intragranular stress concentration in plastic deformed Ni-base superalloy: Governing factors and process10.1016/j.msea.2021.140820 ↗
4. Primary creep in single crystal superalloys: Origins, mechanisms and effects10.1016/j.actamat.2006.09.026 ↗
5. Mottura, First-principles modeling of superlattice intrinsic stacking fault energies in Ni3Al based alloys10.1016/j.actamat.2017.11.042 ↗
6. Strength-ductility paradox in a directionally solidified nickel base superalloy10.1016/j.matlet.2018.02.128 ↗
7. When a defect is a pathway to improve stability: a case study of the L12 Co3TM superlattice intrinsic stacking fault10.1007/s10853-019-03884-z ↗
8. Hardening Ni3Al via complex stacking faults and twinning boundary
9. Atomic structure and elemental segregation behavior of creep defects in a Co-Al-W-based single crystal superalloys under high temperature and low stress10.1016/j.actamat.2020.03.015 ↗
10. Alloying effects on the stacking fault energies of the γ' phase in Ni-based superalloys
11. Effects of alloying elements on the generalized stacking fault energy of Ti5Si3: A first principle study10.1016/j.jallcom.2021.158980 ↗
12. On the composition of microtwins in a single crystal nickel-based superalloy10.1016/j.scriptamat.2016.08.029 ↗
13. Segregation of alloying eleme nts to intrinsic and extrinsic stacking faults in γ′-Ni3Al via first principles calculations10.1016/j.scriptamat.2015.02.020 ↗
14. Diffusion processes during creep at intermediate temperatures in a ni-based superalloy10.1016/j.actamat.2017.09.027 ↗
15. Strategy to enhance intrinsic ductility and surface stability of Mg-Zn-R (R=La to Sm) alloys from a first-principles study10.1016/j.commatsci.2019.04.032 ↗
16. Microtwinning and other shearing mechanisms at intermediate temperatures in Ni-based superalloys10.1016/j.pmatsci.2009.03.010 ↗
17. Segregation of alloying elements to planar faults in γ'-Ni3Al10.1016/j.actamat.2018.01.055 ↗
18. Alloying element additions to Ni3Al: Site preferences and effects on elastic properties from first-principles calculations10.1016/j.commatsci.2011.09.016 ↗
19. Unveiling the Re effect in Ni-based single crystal superalloys10.1038/s41467-019-14062-9 ↗
20. Influence of tungsten and rhenium concentration on creep properties of a second generation superalloy10.1016/S0921-5093(01)01063-2 ↗
21. Creep Deformation Mechanisms in Some Modern Single-Crystal Superalloys10.7449/2004/Superalloys_2004_189_195 ↗
22. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
23. Evolution of Two-Dimensional Wormlike Nanoclusters on Metal Surfaces10.1103/PhysRevLett.86.3088 ↗
24. Zunger, GaAs quantum structures: Comparison between direct pseudopotential and single-band truncated-crystal calculation10.1063/1.471797 ↗
25. Atomic Scale Structure and Chemical Composition across Order-Disorder Interfaces10.1103/PhysRevLett.102.086101 ↗
26. Special points for brillouin-zone integrations10.1103/PhysRevB.16.1746 ↗
27. The high-temperature thermal expansion of Ni3Al measured by X-ray diffraction and dilation methods10.1088/0953-8984/1/32/004 ↗
28. Effect of composition on antiphase boundary energy in Ni3Al based alloys: Ab initio calculations10.1103/PhysRevB.93.224106 ↗
29. First-principles studies of effects of interstitial boron and carbon on the structural, elastic, and electronic properties of Ni solution and Ni3Al intermetallics
30. Ab initio description of segregation and cohesion of grain boundaries in W-25 at.% Re alloys10.1016/j.actamat.2014.12.053 ↗
31. Effect of alloying elements on stacking fault energies of γ and γʹ phases in Ni-based superalloy calculated by first principles10.1016/j.vacuum.2020.109682 ↗
32. Surface and segregation energies of Ag based alloys with Ni, Co and Fe: Direct experimental measurement and DFT study
33. Analysis of interface properties and associated void of nanoscale Al precipitates in Al-Si alloys: First-principles calculations and experiment10.1016/j.jallcom.2021.159598 ↗
34. Atomic segregation at twin boundaries in a Mg-Ag alloy10.1016/j.scriptamat.2019.11.025 ↗
35. Direct observation and impact of co-segregated atoms in magnesium having multiple alloying elements10.1038/s41467-019-10921-7 ↗
36. Dean · 1999