An FE-analysis of anisotropic creep damage and deformation in the single crystal SRR99 under multiaxial loads

Abstract Multidimensional stress–strain and damage analyses of engineering structural components with the help of numerical simulations are of great interest. These can only be done by using adequate material models and suitable numerical methods. Bertram and Olschewski (Computational modelling of anisotropic materials under creep conditions, Math. Modelling Sci. Comp. 5 (1995) 100–109; Anisotropic creep modeling of the single crystal superalloy SRR99, J. Comp. Mater. Sci. 5 (1996) 12–16), proposed a three-dimensional creep model for single crystals. An anisotropic creep damage model for single crystals was also suggested by Qi and Bertram (W. Qi, A. Bertram, Anisotropic creep damage modeling of single crystal superalloys, Tech. Mech. 17 (1997) 313–322; W. Qi, Modellierung der Kriechschadigung einkristalliner Superlegierungen in Hochtemperaturbereich, Ph.D. dissertation, Technical University Berlin, VDI Verlag, Dusseldorf, 1998; W. Qi, A. Bertram, Damage modeling of the single crystal superalloy SRR99 under monotonous creep, Comput. Mater. Sci. 13 (1998) 132–141). The coupled model has been used to predict the creep deformation and the lifetime of the single crystal SRR99 under uniaxial creep loads at 760°C. The purpose of this work is the application of the coupled model to the simulation of multiaxial creep behavior and damage development, and its dependence upon non-proportional loading paths of SRR99 at 760°C.