Study on the effect of pressure on fire whirl combustion characteristics with different air-inlet widths

1. Tohidi A, Gollner M, Xiao H (2018) Fire whirls. Annu Rev Fluid Mech 50:187–213. https://doi.org/10.1146/annurev-fluid-122316-04520910.1146/annurev-fluid-122316-045209 ↗

2. Emmons H, Ying S (1967) The fire whirl 11(1):475–488. https://doi.org/10.1016/s0082-0784(67)80172-310.1016/s0082-0784(67)80172-3 ↗

3. Satoh K, Yang K (1997) Simulations of swirling fires controlled by channeled self-generated entrainment flows. Fire Saf Sci 5:201–212. https://doi.org/10.3801/IAFSS.FSS.5-20110.3801/IAFSS.FSS.5-201 ↗

4. Liu C, Huang Q, Zheng K, Qin J, Zhou D, Wang J (2020) Impact of lithium salts on the combustion characteristics of electrolyte under diverse pressures. Energies 13(20):5373. https://doi.org/10.3390/en1320537310.3390/en13205373 ↗

5. Chuah K, Kuwana K, Saito K (2009) Modeling a fire whirl generated over a 5-cm-diameter methanol pool fire. Combust Flame 156(9):1828–1833. https://doi.org/10.1016/j.combustflame.2009.06.01010.1016/j.combustflame.2009.06.010 ↗

6. Chuah K, Kuwana K, Saito K, Williams F (2011) Inclined fire whirls. Proc Combust Inst 33(2):2417–2424. https://doi.org/10.1016/j.proci.2010.05.10210.1016/j.proci.2010.05.102 ↗

7. Hayashi Y, Kuwana K, Dobashi R (2011) Influence of vortex structure on fire whirl behavior. Fire Safety Science 10:671–679. https://doi.org/10.3801/IAFSS.FSS.10-67110.3801/IAFSS.FSS.10-671 ↗

8. Hartl K, Smits A (2022) The interaction of double burner fire whirls. Combust Flame 235:111679. https://doi.org/10.1016/j.combustflame.2021.11167910.1016/j.combustflame.2021.111679 ↗

9. Yan Y, Fang X, Cheung S, Yan P, Tu J (2021) Characterisation and analysis on the instantaneous development and dynamic vortex cores of fire whirls in a fixed-frame facility. Int J Heat Mass Transf 175:121355. https://doi.org/10.1016/j.ijheatmasstransfer.2021.12135510.1016/j.ijheatmasstransfer.2021.121355 ↗

10. Li S, Yao Q, Law C (2019) The bottom boundary-layer structure of fire whirls. Proc Combust Inst. https://doi.org/10.1016/j.proci.05.00910.1016/j.proci.05.009 ↗

11. Yu H, Guo S, Peng M, Li Q, Ruan J, Wan W, Chen C (2013) Study on the influence of air-inlet width on fire whirls combustion characteristic. Procedia Engineering 62:813–820. https://doi.org/10.1016/j.proeng.2013.08.13010.1016/j.proeng.2013.08.130 ↗

12. Sun P, Zhang X, Ding C, Huang X (2021) Effect of reduced pressure on the burning dynamics of fire whirls. Fire Saf J 125:103419. https://doi.org/10.1016/j.firesaf.2021.10341910.1016/j.firesaf.2021.103419 ↗

13. Zukoski E (1985) Visible structure of buoyant diffusion flames. Symp Combust 20(1):361–366. https://doi.org/10.1016/S0082-0784(85)80522-110.1016/S0082-0784(85)80522-1 ↗

14. Parente R, Pereira J, Pereira J (2019) On the influence of circulation on fire whirl height. Fire Saf J 106:146–154. https://doi.org/10.1016/j.firesaf.2019.03.01010.1016/j.firesaf.2019.03.010 ↗

15. Ma Q, Liu Q, Zhang H, Tian R, Ye J, Yang R (2017) Experimental study of the mass burning rate in n-heptane pool fire under dynamic pressure. Appl Therm Eng 113:1004–1010. https://doi.org/10.1016/j.applthermaleng.2016.11.10810.1016/j.applthermaleng.2016.11.108 ↗

16. Wei Y, Zhang J, Nadjai A, Beji T, Delichatsios M (2011) A global soot model developed for fires: validation in laminar flames and application in turbulent pool fires. Fire Saf J 46(7):371–387. https://doi.org/10.1016/j.firesaf.2011.06.00410.1016/j.firesaf.2011.06.004 ↗

17. Lautenberger C, Ris J, Dembsey N, Barnett J, Baum H (2005) A simplified model for soot formation and oxidation in cfd simulation of non-premixed hydrocarbon flames. Fire Saf J 40(2):141–17610.1016/j.firesaf.2004.10.002 ↗

18. Delichatsios M (1994) A phenomenological model for smoke-point and soot formation in laminar flames. Combust Sci Technol 100(1–6):283–298. https://doi.org/10.1080/0010220940893545710.1080/00102209408935457 ↗

19. Most J, Mandin P, Chen J, Joulain P, Durox D, Fernande-Pello A (1996) Influence of gravity and pressure on pool fire-type diffusion flames. In Symp (Int) Combust 26(1):1311–1317. https://doi.org/10.1016/S0082-0784(96)80349-310.1016/S0082-0784(96)80349-3 ↗

20. Huang Q, Lu S, Liu X, Zheng K, Xu D, Liu C (2021) Experimental thermal hazard investigation on carbonate electrolytes using a cone calorimeter. Case Stud Therm Eng. https://doi.org/10.1016/j.csite.2021.10091210.1016/j.csite.2021.100912 ↗

21. Liu C, Zheng K, Zhou Y, Zhu K, Huang Q (2021) Experimental thermal hazard investigation of pressure and EC/PC/EMC mass ratio on electrolyte. Energies 14(9):2511. https://doi.org/10.3390/en1409251110.3390/en14092511 ↗

22. Xu D, Huang G, Guo L, Chen Y, Ding C, Liu C (2022) Enhancement of catalytic combustion and thermolysis for treating polyethylene plastic waste. Adv Compos Mater 5(1):113–129. https://doi.org/10.1007/s42114-021-00317-x10.1007/s42114-021-00317-x ↗

23. Huang Q, Glazier S, Louli A, McArthur M, Liu C, Schrooten J, Dahn J (2020) Effects of graphite heat-treatment temperature on single-crystal Li[Ni5Mn3Co2]O2/graphite pouch cells. J Electrochem Soc 167(8). https://doi.org/10.1149/1945-7111/ab938110.1149/1945-7111/ab9381 ↗

24. Qin J, Liu C, Huang Q (2020) Simulation on fire emergency evacuation in special subway station based on Pathfinder. Case Stud Therm Eng 2110.1016/j.csite.2020.100677 ↗

25. Wu N, Zhao B, Chen X, Hou C, Huang M, Alhadhrami A, Mersal G, Ibrahim M, Tian J (2022) Dielectric properties and electromagnetic simulation of molybdenum disulfide and ferric oxide-modified Ti3C2TX MXene hetero-structure for potential microwave absorption. Adv Compos Mater 5:1548–1556. https://doi.org/10.1007/s42114-022-00490-710.1007/s42114-022-00490-7 ↗

26. Chen Y, Lin J, Mersal G, Zuo J, Li J, Wang Q, Feng Y, Liu J, Liu Z, Wang B, Xu B, Guo Z (2022) “Several birds with one stone” strategy of pH/thermoresponsive flame-retardant/photothermal bactericidal oil-absorbing material for recovering complex spilled oil. J Mater Sci Technol 128:82–97. https://doi.org/10.1016/j.jmst.2022.05.00210.1016/j.jmst.2022.05.002 ↗

27. Zhang D, Williams B, Santos V, Lofink B, Becher E, Partyka A, Peng X, Sun L (2020) Self-assembled intumescent flame retardant coatings: influence of pH on the flammability of cotton fabrics. Engi Sci 12:106–112. https://doi.org/10.30919/es8d113410.30919/es8d1134 ↗

28. Zheng Z, Lin X, Yang M, He Z, Bao E, Zhang H, Tian Z (2020) Progress in the application of machine learning in combustion studies. ES Energ Environ 9:1–14. https://doi.org/10.30919/esee8c79510.30919/esee8c795 ↗

29. Liu C, Xu D, Weng J, Zhou S, Li W, Wan Y, Jiang S, Zhou D, Wang J, Huang Q (2020) Phase change materials application in battery thermal management system: a review. Materials 13(20):4622. https://doi.org/10.3390/ma1320462210.3390/ma13204622 ↗

30. Jing X, Li Y, Zhu J, Chang L, Maganti S, Naik N, Xu B, Murugadoss V, Huang M, Guo Z (2022) Improving thermal conductivity of polyethylene/polypropylene by styrene-ethylene-propylene-styrene wrapping hexagonal boron nitride at the phase interface. Adv Compos Hybrid Mater. https://doi.org/10.1007/s42114-022-00438-x10.1007/s42114-022-00438-x ↗

31. Huang Q, Chen H, Zheng K, Zhu K, Liu C (2021) Comparison of oxygen consumption calorimetry and thermochemistry theory on quantitative analysis of electrolyte combustion characteristics. Case Studies in Thermal Engineering. https://doi.org/10.1016/j.csite.2021.10108510.1016/j.csite.2021.101085 ↗

32. Chu T, Gao Y, Yi L, Fan C, Yan L, Ding C, Liu C, Huang Q, Wang Z (2022) Highly fire-retardant optical wood enabled by transparent fireproof coatings. Adv Compos Hybrid Mater. https://doi.org/10.1007/s42114-022-00440-310.1007/s42114-022-00440-3 ↗

33. Yu Z, Yan Z, Zhang F, Wang J, Shao Q, Murugadoss V, Alhadhrami A, Mersal G, Ibrahim M, El-Bahy Z, Li Y, Huang M, Guo Z (2022) Waterborne acrylic resin co-modified by itaconic acid and γ-methacryloxypropyl triisopropoxidesilane for improved mechanical properties, thermal stability, and corrosion resistance. Prog Org Coat 168:106875. https://doi.org/10.1016/j.porgcoat.2022.10687510.1016/j.porgcoat.2022.106875 ↗

34. Huang Q, Yu S, Chen Y, Lu S, Lu Z, Liu C (2022) Study on the high temperature oxidation/nitridation behavior of Mg alloys AZ31, WE43 and ZE10. Case Stud Therm Eng. https://doi.org/10.1016/j.csite.2022.10175910.1016/j.csite.2022.101759 ↗

35. Ouyang L, Huang W, Huang M, Qiu B (2022) Polyaniline improves granulation and stability of aerobic granular sludge. Adv Compos Hybrid Mater. https://doi.org/10.1007/s42114-022-00450-110.1007/s42114-022-00450-1 ↗

36. Gao S, Zhao X, Fu Q, Zhang T, Zhu J, Hou F, Ni J, Zhu C, Li T, Wang Y, Murugadoss V, Mersal G, Ibrahim M, El-Bahy Z, Huang M, Guo Z (2022) Highly transmitted silver nanowires-SWCNTs conductive flexible film by nested density structure and aluminum-doped zinc oxide capping layer for flexible amorphous silicon solar cells. J Mater Sci Technol 126:152–160. https://doi.org/10.1016/j.jmst.2022.03.01210.1016/j.jmst.2022.03.012 ↗

37. Jing C, Zhang Y, Zheng J, Ge S, Lin J, Pan D, Naik N, Guo Z (2022) In-situ constructing visible light CdS/Cd-MOF photocatalyst with enhanced photodegradation of methylene blue. Particuology 69:111–122. https://doi.org/10.1016/j.partic.2021.11.01310.1016/j.partic.2021.11.013 ↗

38. Zhang Y, Zheng J, Nan J, Gai C, Shao Q, Murugadoss V, Maganti S, Naik N, Algadi H, Huang M, Xu B, Guo Z (2023) Influence of mass ratio and calcination temperature on physical and photoelectrochemical properties of ZnFe-layered double oxide/cobalt oxide heterojunction semiconductor for dye degradation applications. Particuology 74:141–155. https://doi.org/10.1016/j.partic.2022.05.01010.1016/j.partic.2022.05.010 ↗

39. Pan D, Yang G, Abo-Dief H, Dong J, Su F, Liu C, Li Y, Xu B, Murugadoss V, Naik N, El-Bahy S, El-Bahy Z, Huang M, Guo Z (2022) Vertically aligned silicon carbide nanowires/boron nitride cellulose aerogel networks enhanced thermal conductivity and electromagnetic absorbing of epoxy composites. Nano-Micro Lett 14:118. https://doi.org/10.1007/s40820-022-00863-z10.1007/s40820-022-00863-z ↗

40. He S, Huang Y, Chen G, Feng M, Dai H, Yuan B, Chen X (2019) Effect of heat treatment on hydrophobic silica aerogel. J Hazard Mater 362:294–302. https://doi.org/10.1016/j.jhazmat.2018.08.08710.1016/j.jhazmat.2018.08.087 ↗

41. Meng X, Yang H, Lu Z, Liu Y (2022) Study on catalytic pyrolysis and combustion characteristics of waste cable sheath with crosslinked polyethylene. Adv Compos Hybrid Mater. https://doi.org/10.1007/s42114-022-00516-010.1007/s42114-022-00516-0 ↗

42. Weng J, He Y, Ouyang D, Yang X, Chen M, Cui S, Zhang G, Yuen R, Wang J (2021) Honeycomb-inspired design of a thermal management module and its mitigation effect on thermal runaway propagation. Appl Therm Eng 195:117147. https://doi.org/10.1016/j.applthermaleng.2021.11714710.1016/j.applthermaleng.2021.117147 ↗

43. Shi G, He S, Chen G, Ruan C, Ma Y, Chen Q, Jin X, Liu X, He C, Du C, Dai H, Yang X (2022) Crayfish shell-based micro-mesoporous activated carbon: Insight into preparation and gaseous benzene adsorption mechanism. Chem Eng J 428:131148. https://doi.org/10.1016/j.cej.2021.13114810.1016/j.cej.2021.131148 ↗

44. Ding C, Zhu N, Wang X, Alhadhrami A, Mahmoud M, Ibrahim M, Huang Q, Liu C, Huang M, Wang J (2022) Experimental study on the burning behaviors of 21700 lithium-ion batteries with high specific energy after different immersion duration. Adv Compos Hybrid Mater. https://doi.org/10.1007/s42114-022-00536-w10.1007/s42114-022-00536-w ↗

45. Weng J, Ouyang D, Liu Y, Chen M, Li Y, Huang X, Wang J (2021) Alleviation on battery thermal runaway propagation: Effects of oxygen level and dilution gas. J Power Sources 509:230340. https://doi.org/10.1016/j.jpowsour.2021.23034010.1016/j.jpowsour.2021.230340 ↗

46. He S, Chen G, Xiao H, Shi G, Ruan C, Ma Y, Dai H, Yuan B, Chen X, Yang X (2021) Facile preparation of N-doped activated carbon produced from rice husk for CO2 capture. J Colloid and Interf Sci 582:90–10. https://doi.org/10.1016/j.jcis.2020.08.02110.1016/j.jcis.2020.08.021 ↗