journal article·2022-08Open access

Nonlinear micro finite element models based on digital volume correlation measurements predict early microdamage in newly formed bone

Marta Peña Fernández, Sebastian J. Sasso, Samuel McPhee, Cameron Black, Janos Kanczler, Gianluca Tozzi, Uwe Wolfram

Abstract

Bone regeneration in critical-sized defects is a clinical challenge, with biomaterials under constant development aiming at enhancing the natural bone healing process. The delivery of bone morphogenetic proteins (BMPs) in appropriate carriers represents a promising strategy for bone defect treatment but optimisation of the spatial-temporal release is still needed for the regeneration of bone with biological, structural, and mechanical properties comparable to the native tissue. Nonlinear micro finite element (μFE) models can address some of these challenges by providing a tool able to predict the biomechanical strength and microdamage onset in newly formed bone when subjected to physiological or supraphysiological loads. Yet, these models need to be validated against experimental data. In this study, experimental local displacements in newly formed bone induced by osteoinductive biomaterials subjected to in situ X-ray computed tomography compression in the apparent elastic regime and measured using digital volume correlation (DVC) were used to validate μFE models. Displacement predictions from homogeneous linear μFE models were highly correlated to DVC-measured local displacements, while tissue heterogeneity capturing mineralisation differences showed negligible effects. Nonlinear μFE models improved the correlation and showed that tissue microdamage occurs at low apparent strains. Microdamage seemed to occur next to large cavities or in biomaterial-induced thin trabeculae, independent of the mineralisation. While localisation of plastic strain accumulation was similar, the amount of damage accumulated in these locations was slightly higher when including material heterogeneity. These results demonstrate the ability of the nonlinear μFE model to capture local microdamage in newly formed bone tissue and can be exploited to improve the current understanding of healing bone and mechanical competence. This will ultimately aid the development of BMPs delivery systems for bone defect treatment able to regenerate bone with optimal biological, mechanical, and structural properties.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Bone health and osteoporosis research · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (98)

Show source-provided references
1. The role of mechanical stimulation in the enhancement of bone healing10.1016/j.injury.2020.10.009 ↗
2. Banwart · 1995 · 20
3. Comparison of the elastic and yield properties of human femoral trabecular and cortical bone tissue10.1016/S0021-9290(03)00257-4 ↗
4. Statistical methods for assessing agreement between two methods of clinical measurement10.1016/S0140-6736(86)90837-8 ↗
5. Numerical validation framework for micromechanical simulations based on synchrotron 3D imaging10.1007/s00466-016-1357-0 ↗
6. A nonlocal constitutive model for trabecular bone softening in compression10.1007/s10237-010-0200-3 ↗
7. Toward delivery of multiple growth factors in tissue engineering10.1016/j.biomaterials.2010.04.053 ↗
8. Micro-CT based finite element models of cancellous bone predict accurately displacement once the boundary condition is well replicated: a validation study10.1016/j.jmbbm.2016.09.014 ↗
9. Nanoclay-based 3D printed scaffolds promote vascular ingrowth ex vivo and generate bone mineral tissue in vitro and in vivo10.1088/1758-5090/ab8753 ↗
10. Porous scaffold architecture guides tissue formation10.1002/jbmr.1589 ↗
11. Polycaprolactone scaffold and reduced rhBMP-7 dose for the regeneration of critical-sized defects in sheep tibiae10.1016/j.biomaterials.2013.09.011 ↗
12. BMP delivery complements the guiding effect of scaffold architecture without altering bone microstructure in critical-sized long bone defects: a multiscale analysis10.1016/j.actbio.2015.05.015 ↗
13. Micro finite element models of the vertebral body: validation of local displacement predictions10.1371/journal.pone.0180151 ↗
14. A nonlinear QCT-based finite element model validation study for the human femur tested in two configurations in vitro10.1016/j.bone.2012.09.006 ↗
15. Development of specific collagen scaffolds to support the osteogenic and chondrogenic differentiation of human bone marrow stromal cells10.1016/j.biomaterials.2008.03.040 ↗
16. Precision of digital volume correlation approaches for strain analysis in bone imaged with micro-computed tomography at different dimensional levels10.3389/fmats.2017.00031 ↗
17. Clay gels for the delivery of regenerative microenvironments10.1002/adma.201100968 ↗
18. Bone tissue engineering via growth factor delivery: from scaffolds to complex matrices10.1093/rb/rby013 ↗
19. Complications following autologous bone graft harvesting from the iliac crest and using the RIA: a systematic review10.1016/j.injury.2011.06.015 ↗
20. BoneJ: free and extensible bone image analysis in ImageJ10.1016/j.bone.2010.08.023 ↗
21. Computational modelling of ovine critical-sized tibial defects with implanted scaffolds and prediction of the safety of fixator removal10.1016/j.jmbbm.2015.01.008 ↗
22. Effects of tissue heterogeneity on trabecular micromechanics examined by microCT-based finite element analysis and digital volume correlation
23. Multiscale modeling of bone tissue mechanobiology10.1016/j.bone.2021.116032 ↗
24. Mineral heterogeneity has a minor influence on the apparent elastic properties of human cancellous bone: a SRμCT-based finite element study10.1080/10255842.2011.581236 ↗
25. Bone allografts: a review of safety and efficacy10.4103/0970-9290.87084 ↗
26. Heterogeneous linear elastic trabecular bone modelling using micro-CT attenuation data and experimentally measured heterogeneous tissue properties10.1016/j.jbiomech.2008.05.014 ↗
27. Activation of bone remodeling after fatigue: differential response to linear microcracks and diffuse damage10.1016/j.bone.2010.07.006 ↗
28. Modeling and experimental validation of trabecular bone damage, softening and densification under large compressive strains10.1016/j.jmbbm.2012.06.005 ↗
29. Viscoelasticity in natural tissues and engineered scaffolds for tissue reconstruction10.1016/j.actbio.2019.08.013 ↗
30. A biomechanical regulatory model for periprosthetic fibrous-tissue differentiation10.1023/A:1018520914512 ↗
31. Differences in trabecular microarchitecture and simplified boundary conditions limit the accuracy of quantitative computed tomography-based finite element models of vertebral failure10.1115/1.4038609 ↗
32. Individualised, micro CT-based finite element modelling as a tool for biomechanical analysis related to tissue engineering of bone10.1016/S0142-9612(03)00516-7 ↗
33. The management of fractures with bone loss10.1302/0301-620X.87B2.15874 ↗
34. Knowles
35. Biomaterials for the delivery of growth factors and other therapeutic agents in tissue engineering approaches to bone regeneration10.3389/fphar.2018.00513 ↗
36. Delivery vehicle effects on bone regeneration and heterotopic ossification induced by high dose BMP-210.1016/j.actbio.2016.12.012 ↗
37. Performance of QCT-Derived scapula finite element models in predicting local displacements using digital volume correlation10.1016/j.jmbbm.2019.05.021 ↗
38. A mechano-regulation model for tissue differentiation during fracture healing: analysis of gap size and loading10.1016/S0021-9290(02)00086-6 ↗
39. Synchrotron radiation micro-CT at the Micrometer scale for the analysis of the three-dimensional morphology of microcracks in human trabecular bone10.1371/journal.pone.0021297 ↗
40. Bone regeneration with low dose BMP-2 amplified by biomimetic supramolecular nanofibers within collagen scaffolds10.1016/j.biomaterials.2012.10.005 ↗
41. Mechanical regulation of bone formation and resorption around implants in a mouse model of osteopenic bone10.1098/rsif.2018.0667 ↗
42. A concordance correlation coefficient to evaluate reproducibility10.2307/2532051 ↗
43. ParaView visualization of Abaqus output on the mechanical deformation of complex microstructures10.1016/j.cageo.2016.11.008 ↗
44. Anisotropic crack propagation and deformation in dentin observed by four-dimensional X-ray nano-computed tomography10.1016/j.actbio.2019.06.042 ↗
45. In situ characterization of nanoscale strains in loaded whole joints via synchrotron X-ray tomography10.1038/s41551-019-0477-1 ↗
46. Spatial and temporal variations of mechanical properties and mineral content of the external callus during bone healing10.1016/j.bone.2009.04.249 ↗
47. Infection in massive bone allografts10.1097/01.blo.0000150371.77314.52 ↗
48. Bone regeneration: biomaterials as local delivery systems with improved osteoinductive properties10.1016/j.msec.2017.04.038 ↗
49. Continuum damage interactions between tension and compression in osteonal bone10.1016/j.jmbbm.2015.05.007 ↗
50. Mechanical properties of cortical bone and their relationships with age, gender, composition and microindentation properties in the elderly10.1016/j.bone.2015.11.018 ↗
51. Micro and nanotechnologies for bone regeneration: recent advances and emerging designs10.1016/j.jconrel.2018.01.032 ↗
52. Microdamage accumulation in bovine trabecular bone in uniaxial compression10.1115/1.1428745 ↗
53. Trabecular bone modulus–density relationships depend on anatomic site10.1016/S0021-9290(03)00071-X ↗
54. Contribution of inter-site variations in architecture to trabecular bone apparent yield strains10.1016/j.jbiomech.2003.12.037 ↗
55. Clay nanoparticles for regenerative medicine and biomaterial design: a review of clay bioactivity10.1016/j.biomaterials.2017.12.024 ↗
56. Growth factors and bone regeneration: how much bone can we expect?10.1016/j.injury.2011.03.034 ↗
57. Critical-size bone defects10.1097/BOT.0000000000001115 ↗
58. Time-lapsed microstructural imaging of bone failure behavior10.1016/S0021-9290(03)00254-9 ↗
59. Convergence behavior of high-resolution finite element models of trabecular bone10.1115/1.2800865 ↗
60. Three-dimensional methods for quantification of cancellous bone architecture10.1016/S8756-3282(97)00007-0 ↗
61. Validation of finite element models of the mouse tibia using digital volume correlation10.1016/j.jmbbm.2018.06.022 ↗
62. MicroFE models of porcine vertebrae with induced bone focal lesions: validation of predicted displacements with digital volume correlation10.1016/j.jmbbm.2021.104872 ↗
63. Real-time finite element analysis allows homogenization of tissue scale strains and reduces variance in a mouse defect healing model10.1038/s41598-021-92961-y ↗
64. Optimization of digital volume correlation computation in SR-microCT images of trabecular bone and bone-biomaterial systems10.1111/jmi.12745 ↗
65. SR-microCT radiation on the mechanical integrity of trabecular bone using in situ mechanical 959 testing and digital volume correlation10.1016/j.jmbbm.2018.08.012 ↗
66. Full-field strain analysis of bone–biomaterial systems produced by the implantation of osteoregenerative biomaterials in an ovine model10.1021/acsbiomaterials.8b01044 ↗
67. Exploratory full-field strain analysis of regenerated bone tissue from osteoinductive biomaterials10.3390/ma13010168 ↗
68. Low-cycle full-field residual strains in cortical bone and their influence on tissue fracture evaluated via in situ stepwise and continuous X-ray computed tomography10.1016/j.jbiomech.2020.110105 ↗
69. Preservation of bone tissue integrity with temperature control for in situ SR-MicroCT 967 experiments10.3390/ma11112155 ↗
70. Time-resolved in situ synchrotron-microCT: 4D deformation of bone and bone analogues using digital volume correlation10.1016/j.actbio.2021.06.014 ↗
71. Scaffolds and coatings for bone regeneration10.1007/s10856-020-06364-y ↗
72. Microdamage and osteocyte-lacuna strain in bone: a microstructural finite element analysis10.1115/1.2795966 ↗
73. A facile one-stage treatment of critical bone defects using a calcium sulfate/hydroxyapatite biomaterial providing spatiotemporal delivery of bone morphogenic protein-2 and zoledronic acid10.1126/sciadv.abc1779 ↗
74. A dynamical study of the mechanical stimuli and tissue differentiation within a CaP scaffold based on micro-CT finite element models10.1007/s10237-010-0256-0 ↗
75. Size matters: defining critical in bone defect size10.1097/BOT.0000000000000978 ↗
76. Fiji: an open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
77. In vivo micro-computed tomography allows direct three-dimensional quantification of both bone formation and bone resorption parameters using time-lapsed imaging10.1016/j.bone.2010.10.007 ↗
78. Virtual mechanical tests out-perform morphometric measures for assessment of mechanical stability of fracture healing in vivo10.1002/jor.24866 ↗
79. An anisotropic elastic-viscoplastic damage model for bone tissue10.1007/s10237-012-0392-9 ↗
80. The influence of yield surface shape and damage in the depth-dependent response of bone tissue to nanoindentation using spherical and Berkovich indenters10.1080/10255842.2013.818665 ↗
81. A generalized anisotropic quadric yield criterion and its application to bone tissue at multiple length scales10.1007/s10237-013-0472-5 ↗
82. Experimental validation of a nonlinear μ FE model based on cohesive-frictional plasticity for trabecular bone10.1002/cnm.2739 ↗
83. Nanoscale deformation mechanisms and yield properties of hydrated bone extracellular matrix10.1016/j.actbio.2017.07.030 ↗
84. Autologous iliac crest bone graft: should it still be the gold standard for treating nonunions?10.1016/j.injury.2007.02.012 ↗
85. Prediction of fracture callus mechanical properties using micro-CT images and voxel-based finite element analysis10.1016/j.bone.2004.11.007 ↗
86. Efficient materially nonlinear μ FE solver for simulations of trabecular bone failure10.1007/s10237-019-01254-x ↗
87. Biomechanics of callus in the bone healing process, determined by specimen-specific finite element analysis10.1016/j.bone.2019.115212 ↗
88. The scale-up of a tissue engineered porous hydroxyapatite polymer composite scaffold for use in bone repair: an ovine femoral condyle defect study10.1002/jbm.a.35279 ↗
89. Sub-trabecular strain evolution in human trabecular bone10.1038/s41598-020-69850-x ↗
90. Strain amplification in bone mechanobiology: a computational investigation of the in vivo mechanics of osteocytes10.1098/rsif.2012.0286 ↗
91. A finite element inverse analysis to assess functional improvement during the fracture healing process10.1016/j.jbiomech.2009.09.051 ↗
92. A review of biomaterials in bone defect healing, remaining shortcomings and future opportunities for bone tissue engineering10.1302/2046-3758.73.BJR-2017-0270.R1 ↗
93. Valid μ finite element models of vertebral trabecular bone can be obtained using tissue properties measured with nanoindentation under wet conditions10.1016/j.jbiomech.2010.02.026 ↗
94. Fabric-based Tsai-Wu yield criteria for vertebral trabecular bone in stress and strain space10.1016/j.jmbbm.2012.07.005 ↗
95. Characterizing microcrack orientation distribution functions in osteonal bone samples10.1111/jmi.12440 ↗
96. Microstructure determines apparent-level mechanics despite tissue-level anisotropy and heterogeneity of individual plates and rods in normal human trabecular bone10.1002/jbmr.4338 ↗
97. Comparison of the linear finite element prediction of deformation and strain of human cancellous bone to 3D digital volume correlation measurements10.1115/1.2146001 ↗
98. Zysset · 1994 · 1252 · 231