journal article·2024-05

Experimental characterization of residual deformations in human descending thoracic aortas

Marco Amabili, Giulio Franchini, Rinaldo Garziera

Publisher page

Abstract

The effect of residual stresses on the deformation of human aortas under pulsatile pressure is relevant. Experimental measurements of residual deformations are necessary to characterize residual stresses in human aortas. For this reason, an experimental study is carried out. In the present study, longitudinal and circumferential strips from descending thoracic aortas obtained from 21 donors, harvested during organ donation explant, underwent residual deformation measurements. The intact wall and the three separated layers were tested in both directions, resulting in 8 tests per donor, which gives a relevant set of experimental data for further studies. Results show significant residual deformations both in circumferential and longitudinal directions, which are compatible with a significantly compressed intima in the unloaded aorta. In particular, the measured mean effective curvature was -0.193 ± 0.064 (1/mm) for the circumferential strips and -0.076 ± 0.030 (1/mm) for longitudinal strips of the full wall. The effects of age and gender were also investigated.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Elasticity and Material Modeling · Aortic Disease and Treatment Approaches · Connective tissue disorders research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Microstructural and mechanical characterization of the layers of human descending thoracic aortas10.1016/j.actbio.2021.07.036 ↗
2. Layer specific hyperelastic and viscoelastic characterization of human descending thoracic aortas10.1016/j.jmbbm.2019.07.008 ↗
3. Nonlinear dynamics of human aortas for material characterization
4. Nonlinear model of human descending thoracic aortic segments with residual stresses10.1007/s10237-018-1060-5 ↗
5. Fitting mechanical properties of the aortic wall and individual layers to experimental tensile tests including residual stresses10.1016/j.jmbbm.2022.105647 ↗
6. Methods to compute 3D residual stress distributions in hyperelastic tubes with application to arterial walls10.1016/j.ijengsci.2010.06.005 ↗
7. Origin of axial prestretch and residual stress in arteries10.1007/s10237-008-0146-x ↗
8. On residual stresses in arteries10.1115/1.3138600 ↗
9. Identification of circumferential regional heterogeneity of ascending thoracic aneurysmal aorta by biaxial mechanical testing10.1016/j.yjmcc.2019.04.010 ↗
10. Role of smooth muscle activation in the static and dynamic mechanical characterization of human aortas10.1073/pnas.2117232119 ↗
11. Fung · 1984 · 59
12. Development and mechanical characterization of decellularized scaffolds for an active aortic graft10.1016/j.actbio.2023.02.013 ↗
13. Modelling the layer-specific three-dimensional residual stresses in arteries, with an application to the human aorta10.1098/rsif.2009.0357 ↗
14. Layer-specific 3D residual deformations of human aortas with non-atherosclerotic intimal thickening10.1007/s10439-006-9252-z ↗
15. Axial prestretch and circumferential distensibility in biomechanics of abdominal aorta10.1007/s10237-013-0534-8 ↗
16. Humphrey · 2002
17. In situ longitudinal pre-stretch in the human femoropopliteal artery10.1016/j.actbio.2016.01.002 ↗
18. Mechanical behavior of human aortas: experiments, material constants and 3-D finite element modeling including residual stress10.1016/j.jbiomech.2009.02.009 ↗
19. Layer-specific residual deformations and uniaxial and biaxial mechanical properties of thoracic porcine aorta10.1016/j.jmbbm.2015.05.024 ↗
20. A method for incorporating three-dimensional residual stretches/stresses into patient-specific finite element simulations of arteries10.1016/j.jmbbm.2015.03.024 ↗
21. Multi-sector approximation method for arteries: the residual stresses of circumferential rings with non-trivial openings10.1098/rsif.2019.0023 ↗
22. Anisotropic residual stresses in arteries10.1098/rsif.2019.0029 ↗
23. Effects of aneurysm on the directional, regional, and layer distribution of residual strains in ascending thoracic aorta10.1016/j.jmbbm.2015.01.024 ↗
24. Layer-specific residual deformations and their variation along the human aorta10.1115/1.4050913 ↗
25. Regional distribution of circumferential residual strains in the human aorta according to age and gender10.1016/j.jmbbm.2016.12.003 ↗
26. Effects of the three-dimensional residual stresses on the mechanical properties of arterial walls10.1016/j.jtbi.2015.12.015 ↗