journal article·2016-10

A comparative study on biodegradation and mechanical properties of pressureless infiltrated Ti/Ti6Al4V–Mg composites

Ziya Esen, Ezgi Bütev, M. Serdar Karakaş

Publisher page

Abstract

The mechanical response and biodegradation behavior of pressureless Mg-infiltrated Ti-Mg and Ti6Al4V-Mg composites were investigated by compression and simulated body fluid immersion tests, respectively. Prior porous preforms were surrounded uniformly with magnesium as a result of infiltration and the resultant composites were free of secondary phases and intermetallics. Although the composites' compressive strengths were superior compared to bone, both displayed elastic moduli similar to that of cortical bone and had higher ductility with respect to their starting porous forms. However, Ti-Mg composites were unable to preserve their mechanical stabilities during in-vitro tests such that they fractured in multiple locations within 15 days of immersion. The pressure generated by H2 due to rapid corrosion of magnesium caused failure of the Ti-Mg composites through sintering necks. On the other hand, the galvanic effect seen in Ti6Al4V-Mg was less severe compared to that of Ti-Mg. The degradation rate of magnesium in Ti6Al4V-Mg was slower, and the composites were observed to be mechanically stable and preserved their integrities over the entire 25-day immersion test. Both composites showed bioinert and biodegradable characteristics during immersion tests and magnesium preferentially corroded leaving porosity behind while Ti/Ti6Al4V remained as a permanent scaffold. The porosity created by degradation of magnesium was refilled by new globular agglomerates. Mg(OH)2 and CaHPO4 phases were encountered during immersion tests while MgCl2 was detected during only the first 5 days. Both composites were classified as bioactive since the precipitation of CaHPO4 phase is known to be precursor of hydroxyapatite formation, an essential requirement for an artificial material to bond to living bone.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. ASTM F1580-01, n.d. Standard Specificaton for Titanium and Titanium–6Aluminum–4Vanadium Alloy Powders for Coatings of Surgical Implants.
2. In-vitro corrosion inhibition mechanism of fluorine-doped hydroxyapatite and brushite coated Mg–Ca alloys for biomedical applications10.1016/j.ceramint.2013.12.147 ↗
3. Evaluating the stress corrosion cracking susceptibility of Mg–Al–Zn alloy in modified-simulated body fluid for orthopaedic implant application10.1016/j.scriptamat.2008.03.001 ↗
4. Mechanical testing of the bone and the bone-implant interface
5. Brunette · 2001
6. Preparation of hydroxyapatite coating by the use of a sacrificial Mg anode method10.1016/j.ceramint.2005.12.014 ↗
7. Metallic implant biomaterials10.1016/j.mser.2014.10.001 ↗
8. Preparation and characterization of a novel porous titanium scaffold with 3D hierarchical porous structures10.1007/s10856-011-4280-0 ↗
9. Synthesis of hydroxyapatite/fluoroapatite solid solution by a sol–gel method
10. Biomedical magnesium alloys: a review of material properties, surface modifications and potential as a biodegradable orthopaedic implant10.5923/j.ajbe.20120206.02 ↗
11. Characterization of Ti–6Al–4V alloy foams synthesized by space holder technique10.1016/j.msea.2011.01.008 ↗
12. Processing of titanium foams using magnesium spacer particles10.1016/j.scriptamat.2006.11.010 ↗
13. Titanium–magnesium based composites: mechanical properties and in-vitro corrosion response in Ringer׳s solution10.1016/j.msea.2013.02.040 ↗
14. Garg, H., Bedi, G., Garg, A., 2012. Implant Surface Modifications : A Review, pp. 319–324.
15. Ti based biomaterials, the ultimate choice for orthopaedic implants – a review10.1016/j.pmatsci.2008.06.004 ↗
16. Improved mechanical performance and delayed corrosion phenomena in biodegradable Mg–Zn–Ca alloys through Pd-alloying10.1016/j.jmbbm.2011.09.014 ↗
17. Corrosion resistance and surface biocompatibility of a microarc oxidation coating on a Mg–Ca alloy10.1016/j.actbio.2010.11.034 ↗
18. A study on alkaline heat treated Mg–Ca alloy for the control of the biocorrosion rate10.1016/j.actbio.2009.01.048 ↗
19. A review on magnesium alloys as biodegradable materials10.1007/s11706-010-0024-1 ↗
20. Hashemi · 1988
21. High corrosion resistance of magnesium coated with hydroxyapatite directly synthesized in an aqueous solution10.1016/j.electacta.2009.07.033 ↗
22. Corrosion behavior of commercially pure Mg and ZM21 Mg alloy in Ringer׳s solution – long term evaluation by EIS10.1016/j.corsci.2010.10.011 ↗
23. Approach to control the corrosion of magnesium by alloying
24. Biocompatibility and compressive properties of Ti–6Al–4V scaffolds having Mg element10.1016/j.jmbbm.2015.04.015 ↗
25. Preparation of bioactive Ti and its alloys via simple chemical surface treatment10.1002/(SICI)1097-4636(199611)32:3<409::AID-JBM14>3.0.CO;2-B ↗
26. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
27. Novel bioactive titanate layers formed on Ti metal and its alloys by chemical treatments10.3390/ma3010048 ↗
28. Wettability of pure Ti by molten pure Mg droplets10.1016/j.actamat.2009.09.039 ↗
29. Nanostructured calcium phosphates for biomedical applications: novel synthesis and characterization10.1016/j.actbio.2004.09.008 ↗
30. Precipitation of magnesium apatite on pure magnesium surface during immersing in Hank׳s solution10.2320/matertrans.42.1317 ↗
31. Surface reaction of magnesium in Hank׳s solutions10.4028/www.scientific.net/MSF.350-351.349 ↗
32. Preparation and analysis of Ti and alloyed Ti surfaces10.1557/PROC-110-647 ↗
33. Evaluation of cyto-toxicity and corrosion behavior of alkali-heat-treated magnesium in simulated body fluid10.1016/j.surfcoat.2004.01.004 ↗
34. Effect of bicarbonate on biodegradation behaviour of pure magnesium in a simulated body fluid10.1016/j.electacta.2013.10.131 ↗
35. Surface modification of titanium, titanium alloys, and related materials for biomedical applications10.1016/j.mser.2004.11.001 ↗
36. Theoretical analysis of calcium phosphate precipitation in simulated body fluid10.1016/j.biomaterials.2004.05.034 ↗
37. Biodegradable metals for cardiovascular stent application: interests and new opportunities10.3390/ijms12074250 ↗
38. Stress shielding and bone resorption in shoulder arthroplasty10.1067/mse.2003.22 ↗
39. Bone tissue and biomaterial design based on the anisotropic microstructure
40. Mechanical properties of biomedical titanium alloys10.1016/S0921-5093(97)00806-X ↗
41. Development of new metallic alloys for biomedical applications10.1016/j.actbio.2012.06.037 ↗
42. Biomimetic porous titanium scaffolds for orthopedic and dental applications
43. Bonelike hydroxyapatite induction by a gel-derived titania on a titanium substrate
44. Corrosion behaviour of an Mg–Y–RE alloy used in biomedical applications studied by electrochemical techniques10.1016/j.crci.2008.06.007 ↗
45. The influence of titania/hydroxyapatite composite coatings on in vitro osteoblasts behaviour10.1016/S0142-9612(00)00269-6 ↗
46. Composition of corrosion layers on a magnesium rare-earth alloy in simulated body fluids
47. Seiler · 1988
48. Corrosion-electrochemical behavior of magnesium in acidic media, containing oxidants
49. Surface characterization of implant materials c.p. Ti, Ti–6Al–7Nb and Ti–6Al–4V with different pretreatments10.1023/A:1008840026907 ↗
50. Recent progress in corrosion and protection of magnesium alloys – an overview of CAST׳s research work10.1002/adem.200500013 ↗
51. Understanding magnesium corrosion – a framework for improved alloy performance10.1002/adem.200310405 ↗
52. Potential and current distributions of one-dimensional galvanic corrosion systems10.1016/j.corsci.2009.10.003 ↗
53. Effect of tin modification on corrosion of AM70 magnesium alloy10.1016/j.corsci.2009.05.031 ↗
54. “Electroless” deposition of a pre-film of electrophoresis coating and its corrosion resistance on a Mg alloy10.1016/j.electacta.2009.11.078 ↗
55. Crystallographic orientation and electrochemical activity of AZ31 Mg alloy10.1016/j.elecom.2010.05.011 ↗
56. Effect of microstructure evolution on corrosion of different crystal surfaces of AZ31 Mg alloy in a chloride containing solution10.1016/j.corsci.2011.09.005 ↗
57. The surface, microstructure and corrosion of magnesium alloy AZ31 sheet10.1016/j.electacta.2010.02.068 ↗
58. Electrodeposition of hydroxyapatite coating on AZ91D magnesium alloy for biomaterial application10.1016/j.matlet.2008.02.048 ↗
59. Magnesium and its alloys as orthopedic biomaterials: a review10.1016/j.biomaterials.2005.10.003 ↗
60. Magnesium: nutrition and metabolism10.1016/S0098-2997(02)00089-4 ↗
61. Electrochemical property and in vitro degradation of DCPD-PCL composite coating on the biodegradable Mg–Zn alloy10.1016/j.matlet.2011.11.029 ↗
62. In vitro degradation and mechanical integrity of Mg–Zn–Ca alloy coated with Ca-deficient hydroxyapatite by the pulse electrodeposition process10.1016/j.actbio.2009.12.009 ↗
63. Corrosion process of pure magnesium in simulated body fluid10.1016/j.matlet.2007.11.045 ↗
64. Optimising the bioactivity of alkaline-treated titanium alloy10.1016/S0928-4931(02)00022-X ↗
65. Cartilage repair on magnesium scaffolds used as subchondral bone replacement10.1002/mawe.200600027 ↗
66. Influence of aggressive ions on the degradation behavior of biomedical magnesium alloy in physiological environment10.1016/j.actbio.2008.05.014 ↗
67. Mechanisms of magnesium-stimulated adhesion of osteoblastic cells to commonly used orthopaedic implants10.1002/jbm.10270 ↗