On the mechanical behaviour of PEEK and HA cranial implants under impact loading
Source abstract
Abstract
The human head can be subjected to numerous impact loadings such as those produced by a fall or during sport activities. These accidents can result in skull fracture and in some complex cases, part of the skull may need to be replaced by a biomedical implant. Even when the skull is not damaged, such accidents can result in brain swelling treated by decompressive craniectomy. Usually, after recovery, the part of the skull that has been removed is replaced by a prosthesis. In such situations, a computational tool able to analyse the choice of prosthesis material depending on the patient's specific activity has the potential to be extremely useful for clinicians. The work proposed here focusses on the development and use of a numerical model for the analysis of cranial implants under impact conditions. In particular, two main biomaterials commonly employed for this kind of prosthesis are polyether-ether-ketone (PEEK) and macroporous hydroxyapatite (HA). In order to study the suitability of these implants, a finite element head model comprising scalp, skull, cerebral falx, cerebrospinal fluid and brain tissues, with a cranial implant replacing part of the skull has been developed from magnetic resonance imaging data. The human tissues and these two biocompatible materials have been independently studied and their constitutive models are provided here. A computational model of the human head under impact loading is then implemented and validated, and a numerical comparison of the mechanical impact response of PEEK and HA implants is presented. This comparison was carried out in terms of the effectiveness of both implants in ensuring structural integrity and preventing traumatic brain injury. The results obtained in this work highlight the need to take into account environmental mechanical considerations to select the optimal implant depending on the specific patient: whereas HA implants present attractive biointegration properties, PEEK implant can potentially be a much more appropriate choice in a demanding mechanical life style. Finally, a novel methodology is proposed to assess the need for further clinical evaluation in case of impact with both implants over a large range of impact conditions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Automotive and Human Injury Biomechanics · Cellular and Composite Structures · Craniofacial Disorders and Treatments
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (88)
Show source-provided references
1. Fracture précoce d’une cranioplastie en céramique macroporeuse d’hydroxyapatite10.1016/j.neuchi.2012.06.001 ↗
2. Al-Bsharat, A.S., Hardy, W.N., Yang, K.H., Khalil, T.B., Tashman, S., King, A.I., 1999. Brain/skull relative displacement magnitude due to blunt head impact: new experimental data and model. In: Proceedings of the 1999 43rd Stapp Car Crash Conference; San Diego, CA, USA P-350, pp. 321–33210.4271/99SC22 ↗
3. A constitutive model for compressible elastomeric solids10.1007/BF00376130 ↗
4. Characterization of the anisotropic mechanical properties of excised human skin10.1016/j.jmbbm.2011.08.016 ↗
5. Human head tolerance limits to specific injury mechanisms inferred from real world accident numerical reconstruction
6. Constitutive model for the finite deformation stress–strain behavior of poly(ethylene terephthalate) above the glass transition10.1016/S0032-3861(99)00406-1 ↗
7. Osteoconduction in large macroporous hydroxyapatite ceramic implants: evidence for a complementary integration and disintegration mechanism10.1016/S8756-3282(99)00083-6 ↗
8. Mechanical properties of gray and white matter brain tissue by indentation10.1016/j.jmbbm.2015.02.024 ↗
9. Biomechanical assessment of brain dynamic responses due to blast pressure waves10.1007/s10439-009-9813-z ↗
10. A constitutive model of polyether-ether-ketone (PEEK)10.1016/j.jmbbm.2015.08.037 ↗
11. Biomechanical evaluation of cell-loaded and cell-free hydroxyapatite implants for the reconstruction of segmental bone defects10.1023/A:1008939524807 ↗
12. Dassault Systèmes Abaqus v6.12, 2012. Documentation-ABAQUS Analysis User’s Manual, Abaqus Inc.
13. Improved head injury criteria based on head FE model10.1080/13588260802411523 ↗
14. The temperature-dependent fracture models for fiber-reinforced ceramic matrix composites10.1016/j.compstruct.2016.01.020 ↗
15. Modelling bone tissue fracture and healing: a review10.1016/j.engfracmech.2003.08.003 ↗
16. Viscoelastic behavior of human connective tissues: relative contribution of viscous and elastic components10.3109/03008208309005612 ↗
17. Mechanical characterization and numerical simulation of polyether-ther-ketone (PEEK) cranial implants10.1016/j.jmbbm.2011.05.039 ↗
18. Strain rate sensitivity of polyetheretherketone's compressive yield stress at low and high temperatures10.1016/j.mechmat.2015.12.008 ↗
19. Complex skull defects reconstruction with САD/САМ titanium and polyetheretherketone (PEEK) implants
20. Fahlstedt, M., Baeck, K., Halldin, P., Sloten, J.V., Goffin, J., Depreitere, B., Kleiven, S., 2012. Influence of impact velocity and angle in a detailed reconstruction of a bicycle accident. In: Proceedings of the ICORBI Conference, 84, pp. 787–799
21. FEI Amira 6.0.1, 2015.10.1109/ICMIC.2015.7409456 ↗
22. The fate of a macroporous hydroxyapatite cranioplasty four years after implantation: macroscopical and microscopical findings in a case of recurrent atypical meningioma10.1016/j.clineuro.2012.11.032 ↗
23. Fredriksson, R., Håland, Y., Yang, J., 2001. Evaluation of a new pedestrian head injury protection system with a sensor in the bumper and lifting of the bonnet's rear part. In: Proceedings of the 17th ESV Conference, Amsterdam, Netherlands
24. Mechanical and electrical responses of the squid giant axon to simple elongation10.1115/1.2895464 ↗
25. In vivo experimental testing and model identification of human scalp skin10.1016/j.jbiomech.2004.09.034 ↗
26. Gao, C., 2007. Finite Element Modelling of the Human Brain and Application in Neurosurgical (Ph.D. dissertation), Singapore
27. A hyperelastic-thermoviscoplastic constitutive model for semi-crystalline polymers: application to PEEK under dynamic loading conditions10.1016/j.ijplas.2016.09.011 ↗
28. Mechanical impact behavior of polyether–ether–ketone (PEEK)10.1016/j.compstruct.2014.12.061 ↗
29. Investigation of mechanical impact behavior of short carbon-fiber-reinforced PEEK composites10.1016/j.compstruct.2015.08.028 ↗
30. Giovanni, B., Chiandussi, G., Gaviglio, I., 2005. Development and validation of a new finite element model of human head. In: Proceedings of the 19th International Technical Conference on the Enhanced Safety of Vehicles (ESV), Washington, D.C., Paper No. 05-0441
31. Structural integrity of polypropylene prosthetic sockets manufactured using the polymer deposition technique10.1243/095441102321032157 ↗
32. Mechanics of the brain: perspectives, challenges, and opportunities10.1007/s10237-015-0662-4 ↗
33. The use of a mathematical model to describe isothermal stress-strain curves in glassy thermoplastics
34. Characterization of porous hydroxyapatite10.1023/A:1008929305897 ↗
35. Predicting long-term neurological outcomes after severe traumatic brain injury requiring decompressive craniectomy: a comparison of the CRASH and IMPACT prognostic models10.1016/j.injury.2016.04.017 ↗
36. Polyetheretherketone (PEEK). Part I: prospects for use in orthopaedics and traumatology10.55095/achot2010/077 ↗
37. The creation of three-dimensional finite element models for simulating head impact biomechanics10.1533/ijcr.2003.0243 ↗
38. Influence of FE model variability in predicting brain motion and intracranial pressure changes in head impact simulations10.1533/ijcr.2004.0299 ↗
39. Methodology to determine failure characteristics of planar soft tissues using a dynamic tensile test10.1016/j.jbiomech.2005.12.010 ↗
40. Jenkinson, M., Pechaud, M., Smith, S., 2005. BET2: MR-based estimation of brain, skull and scalp surfaces. In: Proceedings of the Eleventh Annual Meeting of the Organization for Human Brain Mapping.
41. Continuum modeling of a neuronal cell under blast loading10.1016/j.actbio.2012.04.039 ↗
42. Finite element model of human skull used for head injury criteria assessment
43. Biological response to chopped–carbon–fiber-reinforced peek10.1002/jbm.820260202 ↗
44. Kang, H.S., Willinger, R., Diaw, B., Chinn, B., 1997. Validation of a 3D anatomic human head model and replication of head impact in motorcycle accident by finite element modeling. In: Proceedings of the 41st Stapp Car Crash Conference, Lake Buena Vista, USA, pp. 329–33810.4271/973339 ↗
45. Parametric study of head response by finite element modeling10.1016/0021-9290(77)90075-6 ↗
46. Dynamic tensile characterization of pig skin10.1007/s10409-014-0042-9 ↗
47. Kleiven, S., Hardy, W.N., 2002. Correlation of the FE model of the human head with local brain motion-consequences for injury prediction. In: Proceedings of the 46th Stapp Car Crash Conference, Ponte Vedra, USA, Society of Automotive Egineers (SAE), SAE Paper No. 2002-22-0007, pp. 123–14410.4271/2002-22-0007 ↗
48. Snoring source identification and snoring noise prediction10.1016/j.jbiomech.2006.03.022 ↗
49. The response of the adult and ATD heads to impacts onto a rigid surface10.1016/j.aap.2014.06.022 ↗
50. Reconstruction of extensive long-bone defects in sheep using porous hydroxyapatite sponges10.1007/s002239900583 ↗
51. The mechanical behavior of the diploë layer of the human skull in compression
52. Obscuring surface anatomy in volumetric imaging data10.1007/s12021-012-9160-3 ↗
53. Olmi, R.M., Ravaglioni, A., Krajewski, A., Pizzoferrato, A., 1984. Impianti di idrossiapatite in femori di conigli. Osservazioni istologiche e microradiografiche, Chir Organi Mov, 69, pp. 383–90
54. Whiplash injury and brain damage: an experimental study10.1001/jama.1968.03140170001001 ↗
55. Strain rate and anisotropy effects on the tensile failure characteristics of human skin10.1016/j.jmbbm.2014.10.006 ↗
56. Outcomes of cranioplasty with synthetic materials and autologous bone grafts10.1016/j.wneu.2015.01.014 ↗
57. A glass fiber-reinforced composite – bioactive glass cranioplasty implant: a case study of an early development stage implant removed due to a late infection10.1016/j.jmbbm.2015.10.030 ↗
58. The mechanical properties of poly(ether-ether-ketone) (PEEK) with emphasis on the large compressive strain response10.1016/j.polymer.2006.11.032 ↗
59. Mechanical characterization of brain tissue in tension at dynamic strain rates10.1016/j.jmbbm.2012.07.015 ↗
60. In vivo biocompatibility testing of peek polymer for a spinal implant system: a study in rabbits10.1002/jbm.10159 ↗
61. Polyethererketone implants for the repair of large cranial defects: a 3-center experience10.1227/NEU.0000000000000477 ↗
62. Human head dynamic response to side impact by finite element modeling10.1115/1.2894885 ↗
63. Falls and fall-related injuries among the elderly: a survey of residential-care facilities in a Swedish municipality10.1023/B:JOHE.0000016717.22032.03 ↗
64. Development and validation of an advanced anisotropic visco-hyperelastic human brain FE model10.1016/j.jmbbm.2013.08.022 ↗
65. Development of skull fracture criterion based on real-world head trauma simulations using finite element head model10.1016/j.jmbbm.2015.11.014 ↗
66. Estimation, simulation, and experimentation of a fall from bed10.1682/JRRD.2007.06.0092 ↗
67. Rheological response of human brain tissue in shear10.1115/1.3425588 ↗
68. Fast robust automated brain extraction10.1002/hbm.10062 ↗
69. Advances in functional and structural MR image analysis and implementation as FSL10.1016/j.neuroimage.2004.07.051 ↗
70. Stalnaker · 1969
71. Use of “custom made” porous hydroxyapatite implants for cranioplasty: postoperative analysis of complications in 1549 patients
72. Investigation of traumatic brain injuries using the next generation of simulated injury monitor (SIMon) finite element head model
73. Takhounts, E., Eppinger, R., 2003. On the development of the SIMon finite element head model. In: Proceedings of the 47th Stapp Car Crash Conference, San Diego, USA, Society of Automotive Engineers (SAE), pp. 107–13310.4271/2003-22-0007 ↗
74. The stress–strain relationships for the skin10.1016/0021-9290(76)90107-X ↗
75. Investigation of the relationship between facial injuries and traumatic brain injuries using a realistic subject-specific finite element head model10.1016/j.aap.2015.03.012 ↗
76. Ueno, K., Melvin, J.W., Lundquist, E., Lee, M.C., 1989. Two-dimensional finite element analysis of human brain impact responses: application of a scaling law. Crashworthiness and Occupant Protection in Transportation Systems, New York, ASME, AMD, vol. 106
77. The Wu-Minn human connectome project: an overview10.1016/j.neuroimage.2013.05.041 ↗
78. Influence of age, treatment with corticosteroids and strain rate on mechanical properties of rat skin10.1016/0304-4165(72)90090-6 ↗
79. Ward, C.C., Chan, M., Nahum, A.M., 1980. Intracranial pressure – a brain injury criterion. In: Proceedings of the 24th Stapp Car Crash Conference, Warrendale, USA, Society of Automotive Engineers (SAE), SAE Paper No. 801304, pp. 347–36010.4271/801304 ↗
80. Modal and temporal analysis of head mathematical models10.1089/neu.1995.12.743 ↗
81. 3D human head finite element model validation against two experimental impacts10.1114/1.165 ↗
82. Willinger, R., Baumgartner, D., Chinn, B., Neale, M., 2000. Head tolerance limits derived from numerical replication of real world accidents. In: Proceedings of the International ICORBI Conference on the Biomechanics of Impacts, Montpellier, France, pp. 209–221
83. Dynamic response of human cranial bone10.1016/0021-9290(71)90010-8 ↗
84. Characterization of the mechanical properties of a dermal equivalent compared with human skin in vivo by indentation and static friction tests10.1111/j.1600-0846.2008.00329.x ↗
85. The anisotropic criterion of von Mises (1928) as a yield condition for PMMCs. A calibration procedure based on numerical cell-analysis10.1016/j.compstruct.2015.08.091 ↗
86. Zhang, L., Yang, K.H., Dwarampudi, R., Omori, K., Li, T., Chang, K., Hardy, W.N., Khalil, T.B., King, A., 2001. Recent advances in brain injury research: a new human head model development and validation. In: Proceedings of the 45th Stapp Car Crash Conference, San Antonio, USA, Society of Automotive Engineers (SAE), SAE Paper No. 2001-22-0017, pp. 369–39410.4271/2001-22-0017 ↗
87. Numerical simulations of the 10-year-old head response in drop impacts and compression tests10.1016/j.cmpb.2016.04.013 ↗
88. Zhou, C., Khalil, C.T.B., King, A.I., 1995. A new model comparing impact responses of the homogeneous and inhomogeneous human brain. In: Proceedings of the 39th Stapp Car Crash Conference, San Diego, USA, Society of Automotive Engineers (SAE), SAE Paper No. 952714, pp. 121–13710.4271/952714 ↗