journal article·2012-08

Solidification of Al2O3–YAG eutectic composites with off-metastable eutectic composition from undercooled melt produced by melting Al2O3–YAP eutectics

Tomoya Nagira, Hideyuki Yasuda, Takumi Sakimura, Kentarou Yoshida

Publisher page

Abstract

Abstract It has been reported that solidification of the Al2O3–YAG equilibrium eutectic structure follows melting of the Al2O3–YAP metastable eutectic structure. Since the exothermic heat due to solidification was consumed by the endothermic heat due to melting, a fine and uniform eutectic structure was obtained. However, the composition of the Al2O3–YAG eutectic structure is restricted to the metastable eutectic composition. In this paper, Al2O3–YAG eutectic compacts with an off-metastable eutectic composition were prepared by the addition of Al2O3 particles to Al2O3–YAP eutectic particles with diameters less than 20 μm. In compositions ranging from 18.5 mol%Y2O3 to 13.5 mol%Y2O3, dense Al2O3–YAG eutectic compacts were formed without any Al2O3 segregation. The flexural strength and the fracture toughness remained almost unchanged with the increase in the Al2O3 phase. The addition of Al2O3 particles to the Al2O3–YAP eutectic particles enabled the matrix phase to change from the YAG phase to the Al2O3 phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Magnesium Oxide Properties and Applications · Glass properties and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Processing and mechanical properties of Al2O3/Y3Al5O12 (YAG) eutectic composite10.1002/9780470313053.ch36 ↗
2. Creep behavior of an Al2O3–Y3Al5O12 eutectic composite10.1002/9780470313053.ch37 ↗
3. A ductile ceramics eutectic composite with high strength at 1873K10.1038/37937 ↗
4. High-temperature strength and thermal stability of a unidirectionally solidified Al2O3/YAG eutectic composite10.1023/A:1004377626345 ↗
5. The creep and thermal stability characteristics of a unidirectionally solidified Al2O3/YAG eutectic composite10.1023/A:1004486303958 ↗
6. Deformation behavior of an Al2O3–Y3Al5O12 eutectic composite in comparison with sapphire and YAG10.1111/j.1151-2916.1993.tb03685.x ↗
7. Kinetics and deformation during the reaction of yttrium–aluminum perovskite and alumina to yttrium–aluminum garnet10.1111/j.1151-2916.1994.tb09745.x ↗
8. Melting behaviour and metastability of yttrium aluminium garnet (YAG) and YAlO3 determined by optical differential thermal analysis10.1007/BF00550589 ↗
9. Selection of eutectic systems in Al2O3–Y2O3 ceramics10.1016/S1468-6996(01)00027-4 ↗
10. Production of undercooled melt by heating the metastable Al2O3–YAP eutectic structure10.2320/matertrans.42.2124 ↗
11. Undercooled melt formation by melting of metastable eutectic structure in Al2O3–Y2O3–ZrO2 system10.2320/matertrans.43.2847 ↗
12. Coupled growth of unidirectionally solidified Al2O3–YAG eutectic ceramics10.1016/S0022-0248(02)01655-X ↗
13. Undercooled melt formation and shaping of alumina–yttrium garnet eutectic ceramics10.1111/j.1151-2916.2003.tb03565.x ↗
14. Solidification and shape casting of Al2O3–YAG eutectics from the undercooled melt produced by melting Al2O3–YAP eutectics10.1016/j.stam.2003.10.022 ↗
15. Undercooled melt shaping of Al2O3–YAG eutectic composite by melting the Al2O3–YAP eutectic structure10.4028/www.scientific.net/MSF.475-479.2709 ↗
16. Effects of shaping conditions on the microstructure and the mechanical property of the Al2O3–YAG eutectic composite produced by melting the Al2O3–YAP eutectic structure10.2320/matertrans.MB200705 ↗
17. Formation and microstructure of Al2O3–YAG eutectic ceramics by phase transformation from metastable system to equilibrium system10.1088/1742-6596/165/1/012006 ↗
18. Application of eutectic composites to gas turbine system and fundamental fracture properties up to 1700°C10.1016/j.jeurceramsoc.2005.01.003 ↗
19. Formation of Y3Al5O12–Al2O3 eutectic microstructure with off-eutectic composition10.1016/j.jeurceramsoc.2008.01.025 ↗
20. Investigation of the solidification behavior of Al2O3/YAG/YSZ ceramic in situ composite with off-eutectic composition10.1016/j.jeurceramsoc.2010.06.011 ↗
21. A critical evaluation of indentation techniques for measuring fracture toughness10.1111/j.1151-2916.1981.tb10320.x ↗
22. Microstructure and mechanical properties of Al2O3–YSZ and Al2O3–YAG directionally solidified eutectic plates10.1016/j.jeurceramsoc.2005.01.021 ↗
23. Fracture characteristics of Al2O3/YAG composite at room temperature to 2073K10.1016/j.jeurceramsoc.2005.01.006 ↗
24. Processing, structure and properties of alumina–YAG eutectic composites
25. Microstructure of Al2O3/Y3Al5O12 eutectic fibers grown by μ-PD method10.1016/S0022-0248(98)01052-5 ↗
26. Crystallographic texture and orientation variants in Al2O3–Y3Al5O12 directionally solidified eutectic crystals10.1016/S0022-0248(01)01590-1 ↗
27. Processing microstructure and properties of Al2O3–Y3Al5O12(YAG) eutectic fibers10.1002/9780470314180.ch88 ↗
28. Fracture behavior of directionally solidified Y3Al5O12/Al2O3 eutectic fiber10.1111/j.1151-2916.1996.tb08575.x ↗