Understanding Distribution and Alignment of MWCNTs inside Multilayer Polymer Systems via the Experimental Study of Anisotropic and Electrical Properties
Source abstract
Abstract
A specific alignment and distribution of rod-like fillers inside a polymer matrix is pivotal in order to enhance the particular properties of the filled material in certain directions. The present work explores the conditions of multiwall carbon nanotubes (MWCNTs) inside different polymer multilayer systems during forced assembly coextrusion. One system was composed of alternated layers of linear low-density polyethylene (LLDPE) and LLDPE filled with MWCNTs (LLDPECNT). The other system was composed of alternated layers of a linear polypropylene filled with MWCNTs (PPCCNT) and a long-chain branched polypropylene (PPH). Interestingly, for the PPCCNT/PPH multilayer systems, when the number of layers increased to a certain amount, the layer thickness decreased close to or below the average length of the MWCNTs thus causing an enhanced MWCNT orientation parallel to the layer direction as well as the flow direction. Conversely, the same phenomenon was not observed for the LLDPECNT multilayer systems. The enhancement of the MWCNT orientation in the PP system was explained by the more effective layer confinement of PPH layers to the PPCCNT layers. The MWCNT conditions inside different polymers was then further reflected by characterization of the microstructures and electrical behaviors.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Polymer crystallization and properties · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
INSA-Lyon, CNRS, Université Claude Bernard Lyon 1, Université Jean Monnet, UMR 5223, Ingénierie des Matériaux Polymères
Key Laboratory of Materials Processing and Mold (Ministry of Education), National Engineering Research Center for Advanced Polymer Processing Technology
Zhengzhou University
Hassan II Academy of Science and Technology
Department of Macromolecular Sciences and Engineering
Case Western Reserve University
Funding
Agence Nationale de la Recherche · China Scholarship Council
References (62)
Show source-provided references
1. 10.1016/j.matpr.2019.08.24010.1016/j.matpr.2019.08.240 ↗
2. 10.1007/s42823-020-00161-x10.1007/s42823-020-00161-x ↗
3. 10.1021/acs.macromol.9b0193110.1021/acs.macromol.9b01931 ↗
4. 10.1002/pc.2582310.1002/pc.25823 ↗
5. 10.1002/adma.20200110510.1002/adma.202001105 ↗
6. 10.1016/j.carbon.2020.11.07010.1016/j.carbon.2020.11.070 ↗
7. 10.1016/j.compositesb.2020.10797910.1016/j.compositesb.2020.107979 ↗
8. 10.1002/adma.20190202810.1002/adma.201902028 ↗
9. 10.1016/j.pmatsci.2023.10107110.1016/j.pmatsci.2023.101071 ↗
10. 10.1016/j.porgcoat.2021.10621510.1016/j.porgcoat.2021.106215 ↗
11. 10.1177/875608791984945910.1177/8756087919849459 ↗
12. 10.1021/acs.macromol.9b0242910.1021/acs.macromol.9b02429 ↗
13. 10.1016/j.polymer.2021.12448610.1016/j.polymer.2021.124486 ↗
14. 10.1016/j.compositesa.2021.10672210.1016/j.compositesa.2021.106722 ↗
15. 10.1016/j.compscitech.2021.10895610.1016/j.compscitech.2021.108956 ↗
16. 10.1016/j.clay.2019.10540810.1016/j.clay.2019.105408 ↗
17. 10.1021/ar300221r10.1021/ar300221r ↗
18. 10.1016/j.mser.2005.04.00210.1016/j.mser.2005.04.002 ↗
19. 10.1016/j.compositesb.2020.10811810.1016/j.compositesb.2020.108118 ↗
20. 10.1016/j.compscitech.2020.10845210.1016/j.compscitech.2020.108452 ↗
21. 10.1016/j.compstruct.2020.11281410.1016/j.compstruct.2020.112814 ↗
22. 10.1088/1361-6528/ab646b10.1088/1361-6528/ab646b ↗
23. 10.1016/j.compositesb.2011.04.01410.1016/j.compositesb.2011.04.014 ↗
24. 10.1016/j.powtec.2020.02.01710.1016/j.powtec.2020.02.017 ↗
25. 10.1002/anie.20230901010.1002/anie.202309010 ↗
26. 10.1016/j.compositesb.2020.10820610.1016/j.compositesb.2020.108206 ↗
27. 10.1002/adfm.20191082610.1002/adfm.201910826 ↗
28. 10.1038/s41586-020-2161-810.1038/s41586-020-2161-8 ↗
29. 10.1016/j.progpolymsci.2020.10121010.1016/j.progpolymsci.2020.101210 ↗
30. 10.3390/polym1303041710.3390/polym13030417 ↗
31. 10.1021/ma901379f10.1021/ma901379f ↗
32. 10.1016/j.compositesa.2025.10871510.1016/j.compositesa.2025.108715 ↗
33. 10.1021/acsami.0c1080210.1021/acsami.0c10802 ↗
34. 10.1002/adom.20180160410.1002/adom.201801604 ↗
35. 10.1515/arh-2006-001410.1515/arh-2006-0014 ↗
36. 10.1002/mame.20240026410.1002/mame.202400264 ↗
37. 10.1039/D3SM01311A10.1039/D3SM01311A ↗
38. 10.1007/s00397-025-01482-210.1007/s00397-025-01482-2 ↗
39. Li, J. Fundamental Insights Into Filled Multi-Micro/Nanolayer Polymeric Systems: Rheology, Nanofiller Dynamics, Conductivity, and EMI Shielding. Ph.D. Dissertation, INSA de Lyon, 2025.
40. 10.1007/s10965-023-03838-910.1007/s10965-023-03838-9 ↗
41. 10.1016/S0008-6223(00)00184-610.1016/S0008-6223(00)00184-6 ↗
42. 10.1016/j.cej.2018.10.23510.1016/j.cej.2018.10.235 ↗
43. 10.1016/j.carbon.2009.02.03010.1016/j.carbon.2009.02.030 ↗
44. 10.1021/acsami.9b0112210.1021/acsami.9b01122 ↗
45. 10.1039/C7NR07030F10.1039/C7NR07030F ↗
46. 10.1016/j.compositesa.2018.08.00610.1016/j.compositesa.2018.08.006 ↗
47. 10.1002/pc.1005510.1002/pc.10055 ↗
48. 10.1016/j.polymer.2008.06.00810.1016/j.polymer.2008.06.008 ↗
49. 10.1038/s43586-021-00064-910.1038/s43586-021-00064-9 ↗
50. 10.1016/j.jcis.2023.12.16410.1016/j.jcis.2023.12.164 ↗
51. 10.1021/acs.jpcc.1c0350610.1021/acs.jpcc.1c03506 ↗
52. 10.1016/j.msea.2007.08.05010.1016/j.msea.2007.08.050 ↗
53. 10.1016/j.matdes.2015.06.16210.1016/j.matdes.2015.06.162 ↗
54. 10.1016/j.carbon.2006.02.03810.1016/j.carbon.2006.02.038 ↗
55. 10.3390/ma304288410.3390/ma3042884 ↗
56. 10.1016/j.compscitech.2020.10832410.1016/j.compscitech.2020.108324 ↗
57. 10.1021/ar300221r10.1021/ar300221r ↗
58. 10.1016/j.mtphys.2024.10133010.1016/j.mtphys.2024.101330 ↗
59. 10.1016/j.compscitech.2024.11078010.1016/j.compscitech.2024.110780 ↗
60. 10.1016/j.cej.2023.14810110.1016/j.cej.2023.148101 ↗
61. 10.1021/acsami.7b0822910.1021/acsami.7b08229 ↗
62. 10.1016/j.compscitech.2022.10968810.1016/j.compscitech.2022.109688 ↗