journal article·2021-11-01Open access

Modeling Electrokinetics of Oxygen Electrodes in Solid Oxide Electrolyzer Cells

Korey Cook, Jacob Wrubel, Zhiwen Ma, Kevin Huang, Xinfang Jin

Abstract

A microscale model is presented in this study to simulate electrode kinetics of the oxygen electrode in a solid oxide electrolyzer cell (SOEC). Two mixed ionic/electronic conducting structures are examined for the oxygen producing electrode in this work: single layer porous lanthanum strontium cobalt ferrite (LSCF), and bilayer LSCF/SCT (strontium cobalt tantalum oxide) structures. A yttrium-stabilized zirconia (YSZ) electrolyte separates the hydrogen and oxygen electrodes, as well as a gadolinium doped-ceria (GDC) buffer layer on the oxygen electrode side. Electrochemical reactions occurring at the two-phase boundaries (2PBs) and three-phase boundaries (3PBs) of single-layer LSCF and bilayer LSCF/SCT oxygen electrodes are modeled under various SOEC voltages with lattice oxygen stoichiometry as the key output. The results reveal that there exists a competition in electrode kinetics between 2PBs and 3PBs, but 3PBs are the primary reactive sites for single-layer LSCF oxygen electrode under high voltages. These locations experience the greatest oxygen stoichiometry variations and are therefore the most likely locations for dimensional changes. By applying an active SCT layer over LSCF, the 2PBs become activated to compete with the 3PBs, thus alleviating oxygen stoichiometry variations and reducing the likelihood of dimensional change. This strategy could reduce lattice structural expansion, proving to be valuable for electrode-electrolyte delamination prevention and will be the focus of future work.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Chemical Looping and Thermochemical Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Hydrogen program
2. Hydrogen fuel basics
3. Thermocatalytic CO2-Free Production of Hydrogen from hydrocarbon fuels
4. Hochtemperatur-elektrolyse von wasserdampf—entwicklungs stand einer neuen technologie zur wasserstoff-erzeugung10.1002/cite.330520518 ↗
5. Hydrogen production via solid electrolytic routes,10.1002/wene.50 ↗
6. Recent advances in high temperature electrolysis using solid oxide fuel cells: a review,10.1016/j.jpowsour.2011.12.019 ↗
7. Advances in solid oxide fuel cells: review of progress through three decades of the international symposia on solid oxide fuel cells10.1149/07801.0063ecst ↗
8. Simulating charge transport in solid oxide mixed ionic and electronic conductors: nernst-planck theory vs modified fick’s law10.1149/2.0941613jes ↗
9. Modeling of oxygen chemical potential distribution in solid oxide electrolyzer cells10.1149/2.0121916jes ↗
10. ‘Solid oxide electrolyzer cell modeling: a review
11. Mechanism of oxygen electrode delamination in solid oxide electrolyzer cells10.1016/j.ijhydene.2010.06.058 ↗
12. Measurement and modeling of the impedance characteristics of porous La1− x Srx CoO3 − δ electrodes10.1149/1.3079337 ↗
13. Atomic-scale mechanisms of oxygen electrode delamination in solid oxide electrolyzer cells10.1016/j.ijhydene.2011.09.117 ↗
14. Electrode kinetics of porous mixed‐conducting oxygen electrodes10.1149/1.1837252 ↗
15. Modeling of oxygen reduction mechanism for 3PB and 2PB pathways at solid oxide fuel cell cathode from multi-step charge transfer10.1016/j.jpowsour.2011.11.002 ↗
16. Oxygen reduction and transportation mechanisms in solid oxide fuel cell cathodes10.1016/j.jpowsour.2009.12.062 ↗
17. ‘Effects of surface overpotential at the La1−xSrxCo1−yFeyO3-Yttria stabilized zirconia interface in a model solid oxide fuel cell cathode10.1016/j.ijhydene.2008.08.008 ↗
18. Oxygen dissociation and interfacial transfer rate on performance of SOFCs with metal-added (LaSr)(CoFe)O3-(Ce,Gd)O2—δ cathodes10.1002/fuce.201000028 ↗
19. Huang · 2009 · 1
20. Solid-gas electrochemical interfaces 1
21. Electrode properties of Sr-doped LaMnO3 on Yttria-stabilized zirconia: II. Electrode Kinetics10.1149/1.1837375 ↗
22. Identification of O2 reduction processes at Yttria stabilized zirconia doped lanthanum manganite interface10.1016/S0378-7753(03)00436-1 ↗
23. Characterization of LSM-YSZ composite electrode by AC impedance spectroscopy10.1016/S0167-2738(01)01009-8 ↗
24. Solid-state electrochemistry: essential course notes and solved exercises
25. Classical models of the interface between an electrode and an electrolyte
26. Studien Über electrische grenzschichten10.1002/andp.18792430702 ↗
27. Jin · 2014
28. Mathematical modeling of oxygen exchange and transport in air-perovskite-YSZ interface regions10.1149/1.1837887 ↗
29. A two-dimensional model and numerical treatment for mixed conducting thin films: the effect of sheet resistance10.1149/1.2710204 ↗
30. Classical, phenomenological analysis of the kinetics of reactions at the gas-exposed surface of mixed ionic electronic conductors10.1007/s10008-006-0144-9 ↗
31. Surface exchange of oxygen in mixed conducting perovskite oxides10.1016/0167-2738(96)00153-1 ↗
32. Oxygen nonstoichiometry and thermo-chemical stability of La0.6Sr0.4Co1-yFeyO3-δ (y=0.2, 0.4, 0.6, 0.8)10.1016/j.ssi.2010.09.024 ↗
33. Oxygen ion mobility and conductivity prediction in cubic yttria-stabilized zirconia single crystals10.1007/s10853-017-1625-1 ↗
34. Chemically-induced stresses in gadolinium-doped ceria solid oxide fuel cell electrolytes10.1016/S0167-2738(96)00588-7 ↗
35. Electrical and ionic conductivity of Gd-doped ceria10.1149/1.1393946 ↗
36. Transport properties of SrCo0.9Nb0.1O3-δ and SrCo0.9Ta0.1O3-δ mixed conductors determined by combined oxygen permeation measurement and phenomenological modeling10.1016/j.memsci.2018.09.053 ↗