journal article·2014Open access

Impurities in the Electroplated sub-50 nm Cu Lines: The Effects of the Plating Additives

Q. Huang, A. Avekians, S. Ahmed, C. Parks, B. Baker-O'Neal, S. Kitayaporn, A. Sahin, Y. Sun, T. Cheng

Abstract

The impurities incorporated in the electrodeposited 40 nm Cu lines as well as in blanket Cu films were studied. Two different levelers were used in the study. While the impurity in the blanket films were found highly dependent on the leveler and its concentration, the leveler had no impact on the impurity in the narrow lines. Furthermore, the concentrations of suppressor and chloride showed little to no impact on the impurity in the narrow lines. An increase of accelerator concentration resulted in higher S and Cl contents in the lines. The increase in S incorporation was also observed for blanket wafers plated with incremental concentrations of accelerator. In addition, the impurity in the narrow lines was also found to increase with the increase of the applied plating current density. A correlation between a slow Cu grain growth and high impurity content was established by using Cu blanket films plated with different leveler concentrations or Cu films ion-implanted with different doses of impurities.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Copper Interconnects and Reliability · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Edelstein D. Heidenreich J. Goldblatt R. Cote W. Uzoh C. Lustig N. Roper P. McDevitt T. Motsiff W. Simon A. , in Proceedings of International Electron Devices Meeting, IEDM, (1997).
2. 10.1147/rd.425.056710.1147/rd.425.0567 ↗
3. Ritzdorf T. Graham L. Jin S. Mu C. Fraser D. , in Proceedings of Proceedings of the IEEE 1998 International Interconnect Technology Conference, (1998).
4. Cabral C. Jr. Andricacos P. C. Gignac L. Noyan I. C. Rodbell K. P. Shaw T. M. Rosenberg R. Harper J. M. E. DeHaven P. W. Locke P. S. Malhotra S. Uzoh C. Klepeis S. J. , in Proceedings of Advanced Metallization Conference, Colorado Spring, CO, (1998).
5. 10.1063/1.37108610.1063/1.371086 ↗
6. Hu C. K. Gignac L. Baker B. Liniger E. Yu R. Flaitz P. , in Proceedings of International Interconnect Technology Conference, Burlington, CA, (2007).
7. 10.1103/PhysRevB.66.07541410.1103/PhysRevB.66.075414 ↗
8. 10.1063/1.170384410.1063/1.1703844 ↗
9. 10.1149/1.210950710.1149/1.2109507 ↗
10. 10.1149/2.023312jes10.1149/2.023312jes ↗
11. 10.1149/2.008210jes10.1149/2.008210jes ↗
12. 10.1149/1.192287210.1149/1.1922872 ↗
13. 10.1557/JMR.2002.008210.1557/JMR.2002.0082 ↗
14. 10.1016/j.mee.2007.09.00710.1016/j.mee.2007.09.007 ↗
15. Sukamto J. Reid J. , in Proceedings of 205th ECS Meeting - International Symposium on Electrochemical Processing in ULSI and MEMS, San Antonio, TX, (2005).
16. 10.1149/2.020209jes10.1149/2.020209jes ↗
17. Reid J. D. Webb E. Sukamto J. T. Yuichi Archer T. , in Proceedings of 205th ECS Meeting - International Symposium on Electrochemical Processing in ULSI and MEMS, San Antonio, TX, (2005).
18. Reid J. D. Zhou J. , in Proceedings of 209th ECS Meeting - International Symposium on Electrochemical Processing in ULSI and MEMS 2, Denver, CO, (2007).
19. Witt C. Srinivasan J. , Proceedings of the Symposium on Electrochemical Processes for ULSI and MEMS PV 57 (2004).
20. 10.1116/1.136103710.1116/1.1361037 ↗
21. 10.1149/1.139409610.1149/1.1394096 ↗
22. 10.1149/1.135449610.1149/1.1354496 ↗
23. 10.1147/rd.491.001910.1147/rd.491.0019 ↗
24. 10.1149/1.137585610.1149/1.1375856 ↗
25. 10.1149/1.235445610.1149/1.2354456 ↗
26. 10.1021/jp209608610.1021/jp2096086 ↗
27. 10.1149/1.179943110.1149/1.1799431 ↗
28. 10.1149/1.315664010.1149/1.3156640 ↗
29. 10.1149/1.307807410.1149/1.3078074 ↗
30. 10.1149/2.012312jes10.1149/2.012312jes ↗
31. 10.1147/rd.491.000310.1147/rd.491.0003 ↗
32. 10.1149/2.015405jes10.1149/2.015405jes ↗