journal article·1991-01-01

LPCVD Titanium Nitride for ULSIs

N. Yokoyama, K. Hinode, Y. Homma

Publisher page

Abstract

Characteristics of films formed by low‐pressure chemical vapor deposition (LPCVD) are investigated for application to the barrier layers in ultra‐large‐scale integration (ULSI) which have fine, high‐aspect‐ratio contact holes. The evaluation focuses on the characteristics crucial for barrier layer usage, such as step coverage, N/Ti atomic concentration ratio, , in , and Cl content. Film resistivities are also measured. Excellent step coverage is confirmed. A high‐aspect‐ratio hole, such as one with a diameter of 0.5 μm and a depth of 0.8 μm, is completely filled by film. The atomic concentration ratio for films formed at 500°–650°C is nearly equal to 1. Reduction in the Cl content coming from the source material, , is a matter of concern. High‐temperature deposition is very effective in reducing Cl content. A film deposited at 700°C contains <1 atom percent (a/o) of Cl, much less than films formed at lower temperatures contain. High‐temperature annealing after deposition can also reduce Cl content. The Cl content in a film formed at 500°C is reduced from 5.7 a/o to 2.7 a/o by annealing at 1000°C for 30 min. The resistivity of a film formed at 700°C is 80 μΩ · cm, which is lower than that of a film formed at lower temperatures. This reduction may be due to the decrease in Cl content.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Semiconductor materials and devices · Metal and Thin Film Mechanics · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Central Research Laboratory, Hitachi, Limited, Kokubunji, Tokyo 185, Japan

References

Reference metadata was not supplied for this record.