Isogeometric static and dynamic analysis of laminated and sandwich composite plates using nonpolynomial shear deformation theory
Source abstract
Abstract
Abstract An effective numerical approach based on the isogeometric analysis (IGA) employing nonpolynomial shear deformation theory (NPSDT) has been proposed and implemented in the present work for the static and dynamic analysis of laminated and sandwich composite plates. The theory assumes the nonlinear distribution of transverse shear stresses, and also satisfy the zero transverse shear deformation at the top and bottom surfaces of the laminates. Using Hamilton’s principle, the governing equation of motion is derived and then discretized based on the IGA technique, which facilitates the use of non-uniform rational B-splines (NURBS) basis functions to easily satisfy the stringent continuity requirement of the NPSDT model ( C 1 -continuity) without any additional variables. The set of governing equations are solved to obtain transient response using Newmark’s time integration scheme. Fourier transformation is carried out on the transient response to obtain the natural frequency. Various numerical examples covering different features of present modeling for laminated and sandwich plates are investigated. The performance of the model has been observed by comparing the evaluated results with different published results available in the open literature which ascertain its precision and range of applicability at a reduced computational cost.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Numerical Analysis Techniques · Composite Structure Analysis and Optimization · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (93)
Show source-provided references
1. A review on optimization of composite structures part i: Laminated composites10.1016/j.compstruct.2018.03.063 ↗
2. Shear deformation in heterogeneous anisotropic plates10.1115/1.3408654 ↗
3. Vinson · 1999
4. Timoshenko · 1959
5. The effect of transverse shear deformation on the bending of elastic plates10.1115/1.4009435 ↗
6. A new look at shear correction factors and warping functions of anisotropic laminates10.1016/0020-7683(94)00258-X ↗
7. A high-order theory of plate deformation—part 2: Laminated plates10.1115/1.3424155 ↗
8. An accurate, simple theory of the statics and dynamics of elastic plates10.1016/0093-6413(80)90049-X ↗
9. A simple higher-order theory for laminated composite plates10.1115/1.3167719 ↗
10. On the theory of bending plates
11. An efficient standard plate theory10.1016/0020-7225(91)90165-Y ↗
12. A transverse shear deformation theory for homogeneous monoclinic plates10.1007/BF01176650 ↗
13. A new trigonometric shear deformation theory for isotropic, laminated composite and sandwich plates10.1016/j.ijsolstr.2011.09.008 ↗
14. A new higher order shear deformation theory for sandwich and composite laminated plates10.1016/j.compositesb.2011.07.017 ↗
15. A new hyperbolic shear deformation theory for buckling and vibration of functionally graded sandwich plate10.1016/j.ijmecsci.2011.01.004 ↗
16. Equivalent single layer theories for composite and sandwich structures: A review10.1016/j.compstruct.2017.07.090 ↗
17. A review of refined shear deformation theories of isotropic and anisotropic laminated plates10.1177/073168402128988481 ↗
18. Bhavikatti · 2005
19. Isogeometric analysis: Cad, finite elements, nurbs, exact geometry and mesh refinement10.1016/j.cma.2004.10.008 ↗
20. Cottrell · 2009
21. Piegl · 1997
22. Rogers · 2001
23. Isogeometric analysis of structural vibrations10.1016/j.cma.2005.09.027 ↗
24. An isogeometric method for the reissner–mindlin plate bending problem
25. Isogeometric analysis of functionally graded plates using a refined plate theory10.1016/j.compositesb.2014.04.001 ↗
26. Isogeometric analysis of laminated composite plates based on a four-variable refined plate theory10.1016/j.enganabound.2014.05.013 ↗
27. A layerwise theory for laminated composites in the framework of isogeometric analysis10.1016/j.compstruct.2013.08.016 ↗
28. Isogeometric analysis of laminated composite and sandwich plates using a layerwise deformation theory10.1016/j.compstruct.2013.04.002 ↗
29. Analytical solutions for the static analysis of laminated composite and sandwich plates based on a higher order refined theory10.1016/S0263-8223(02)00017-X ↗
30. A two variable refined plate theory for orthotropic plate analysis10.1016/j.ijsolstr.2006.02.007 ↗
31. Free vibration of laminated composite plates using two variable refined plate theory10.1016/j.ijmecsci.2010.01.002 ↗
32. A novel three-variable shear deformation plate formulation: theory and isogeometric implementation10.1016/j.cma.2017.07.024 ↗
33. On the general framework of high order shear deformation theories for laminated composite plate structures: a novel unified approach10.1016/j.ijmecsci.2016.01.012 ↗
34. A higher order displacement model for the plate analysis10.1177/073168403027618 ↗
35. A new shear and normal deformation theory for isotropic, transversely isotropic, laminated composite and sandwich plates10.1007/s10999-014-9244-3 ↗
36. Static and free vibration analyses of multilayered plates by a higher-order shear and normal deformation theory and isogeometric analysis10.1016/j.tws.2018.06.013 ↗
37. Isogeometric finite element analysis of composite sandwich plates using a higher order shear deformation theory10.1016/j.compositesb.2013.06.044 ↗
38. Analysis of cross-ply laminated plates using isogeometric analysis and unified formulation
39. Static and free vibration analysis of laminated composite plates using isogeometric approach based on the third order shear deformation theory10.1155/2014/232019 ↗
40. Isogeometric analysis of laminated composite plates using the higher-order shear deformation theory10.1080/15376494.2013.779050 ↗
41. Bending analysis of laminated composite plates using isogeometric collocation method10.1016/j.compstruct.2017.04.073 ↗
42. Isogeometric analysis of laminated composite and functionally graded sandwich plates based on a layerwise displacement theory10.1016/j.compstruct.2017.05.037 ↗
43. Bending analysis of laminated and sandwich composite reissner-mindlin plates using nurbs-based isogeometric approach10.1016/j.proeng.2016.12.175 ↗
44. A cost-effective isogeometric approach for composite plates based on a stress recovery procedure10.1016/j.compositesb.2017.11.026 ↗
45. Free vibration and buckling analysis of laminated composite plates using the nurbs-based isogeometric finite element method10.1016/j.compstruct.2012.01.012 ↗
46. Novel higher order mass matrices for isogeometric structural vibration analysis10.1016/j.cma.2013.03.011 ↗
47. Free vibration and buckling analysis of higher order laminated composite plates using the isogeometric approach10.15632/jtam-pl.53.2.453 ↗
48. Isogeometric analysis of laminated composite and sandwich plates using a new inverse trigonometric shear deformation theory10.1016/j.euromechsol.2013.09.001 ↗
49. Strong formulation isogeometric analysis (sfiga) for laminated composite arbitrarily shaped plates10.1016/j.compositesb.2016.04.034 ↗
50. A new higher order shear deformation theory for static, vibration and buckling responses of laminated plates with the isogeometric analysis10.1016/j.compstruct.2018.07.080 ↗
51. Isogeometric large amplitude free vibration of graphene reinforced laminated plates in thermal environment using nurbs formulation10.1016/j.cma.2017.12.015 ↗
52. Nurbs-based modeling of laminated composite beams with isogeometric displacement-only theory10.1016/j.compositesb.2018.10.073 ↗
53. Geometrically nonlinear nurbs isogeometric finite element analysis of laminated composite plates10.1016/j.compstruct.2012.04.028 ↗
54. Geometrically nonlinear isogeometric analysis of laminated composite plates based on higher-order shear deformation theory10.1016/j.ijnonlinmec.2015.02.007 ↗
55. An isogeometric approach for size-dependent geometrically nonlinear transient analysis of functionally graded nanoplates10.1016/j.compositesb.2017.03.012 ↗
56. Transient analysis of anti-symmetric cross-ply and angle-ply laminated composite plates using nurbs-based isogeometric analysis
57. Static and transient analysis of sandwich composite plates using isogeometric analysis
58. Larsen · 2009
59. Efficient quadrature for nurbs-based isogeometric analysis10.1016/j.cma.2008.12.004 ↗
60. Morgantis S, Auricchio F, Benson D, Gambarin F, Hartmann S, Hughes T, Reali A. Ices report 14–10, 2014.
61. Stochastic buckling behaviour of laminated composite structures with uncertain material properties10.1016/j.ast.2017.01.028 ↗
62. A new inverse hyperbolic shear deformation theory for static and buckling analysis of laminated composite and sandwich plates10.1016/j.compstruct.2012.08.012 ↗
63. An efficient c0 finite element modeling of an inverse hyperbolic shear deformation theory for the flexural and stability analysis of laminated composite and sandwich plates10.1016/j.finel.2013.11.003 ↗
64. Static response and free vibration analysis of fgm plates using higher order shear deformation theory10.1016/j.apm.2010.03.034 ↗
65. Reddy · 2004
66. Studies of refinement and continuity in isogeometric structural analysis10.1016/j.cma.2007.04.007 ↗
67. Static, free vibration, and buckling analysis of laminated composite reissner–mindlin plates using nurbs-based isogeometric approach10.1002/nme.4282 ↗
68. Isogeometric shell analysis: the reissner–mindlin shell10.1016/j.cma.2009.05.011 ↗
69. Krenk · 2009
70. A refined analysis of composite laminates10.1016/S0022-460X(73)80170-1 ↗
71. Analytical and finite element modeling of laminated composite and sandwich plates: An assessment of a new shear deformation theory for free vibration response10.1016/j.ijmecsci.2012.12.010 ↗
72. Free vibration analysis of composite and sandwich plates using an improved discrete kirchhoff quadrilateral element based on third-order zigzag theory10.1007/s00466-008-0285-z ↗
73. Nonlinear transient analysis of rectangular composite laminated plates10.1016/S0263-8223(99)00108-7 ↗
74. The effects of time-dependent excitation on the oscillatory motion of viscously damped laminated composite flat panels10.1016/B978-0-444-88366-7.50016-6 ↗
75. Dynamic response of antisymmetric angle-ply laminated plates subjected to arbitrary loading10.1016/0022-460X(88)90222-2 ↗
76. A review on the response of blast loaded laminated composite plates10.1016/j.paerosci.2015.12.004 ↗
77. Dynamic analysis of an explosively loaded hinged rectangular plate10.1016/0045-7949(87)90263-X ↗
78. Improved numerical integration for locking treatment in isogeometric structural elements, part i: Beams10.1016/j.cma.2014.06.023 ↗
79. Improved numerical integration for locking treatment in isogeometric structural elements. part ii: Plates and shells10.1016/j.cma.2014.07.020 ↗
80. Prathap · 1993
81. Local and global smoothing of discontinuous finite element functions using a least squares method10.1002/nme.1620080303 ↗
82. An isogeometrical approach to error estimation and stress recovery10.1016/j.euromechsol.2011.08.001 ↗
83. A new theory for laminated composite plates
84. Radial basis functions-differential quadrature collocation and a unified formulation for bending, vibration and buckling analysis of laminated plates, according to murakami’s zig-zag theory10.1016/j.compstruc.2011.10.003 ↗
85. Elastic behavior of multilayered bidirectional composites10.2514/3.50249 ↗
86. Exact solutions for rectangular bidirectional composites and sandwich plates10.1177/002199837000400102 ↗
87. Sarangan · 2017
88. Analysis of isotropic, sandwich and laminated plates by a meshless method and various shear deformation theories10.1016/j.compstruct.2009.04.029 ↗
89. Analysis of composite plates using higher-order shear deformation theory and a finite point formulation based on the multiquadric radial basis function method10.1016/S1359-8368(03)00083-0 ↗
90. Higher-order shear deformable theories for flexure of sandwich plates—finite element evaluations10.1016/0020-7683(88)90090-X ↗
91. Free vibration of skew sandwich plates with laminated facings10.1006/jsvi.2000.2918 ↗
92. Vibration of laminate-faced sandwich plate by a new refined element10.1061/(ASCE)0893-1321(2004)17:3(123) ↗
93. Transient analysis of composite and sandwich plates by radial basis functions10.1177/1099636211419132 ↗