journal article·2021-05-01Open access

Effects of Plasticizer Content and Ceramic Addition on Electrochemical Properties of Cross-Linked Polymer Electrolyte

Zhijia Du, X. Chelsea Chen, Ritu Sahore, Xianyang Wu, Jianlin Li, Nancy J. Dudney

Abstract

The development of a safe electrolyte is the key to improving energy density for next generation lithium batteries. In this work, UV-crosslinked poly(ethylene oxide) (PEO) -based polymer and composite electrolytes are systematically investigated on their ionic conductivity, mechanical and electrochemical properties. The polymer electrolytes are plasticized with non-flammable linear short-chain PEO. In the composite electrolytes, a doped lithium aluminum titanium phosphate (LATP) ceramic, LICGC™, is used as the ceramic filler. It is found that the addition of the plasticizer leads to a tradeoff between ion transport and mechanical properties. In contrast, the addition of ceramic fillers improves both the ionic conductivity and mechanical properties. The sample with 20 wt% of LICGC™ shows a conductivity of ∼0.6 mS cm −1 at 50 °C. This sample also demonstrates much longer cycle life than the neat polymer electrolyte in Li platting/stripping test with a capacity of 1 mAh cm −2 . A full cell made with this composite electrolyte against Li metal anode and high voltage LiNi 0.6 Mn 0.2 Co 0.2 O 2 cathode shows 94% capacity retention after 30 cycles, compared to 58% capacity retention with the neat polymer electrolyte. These results demonstrate that a hybrid of polymer/ceramic/non-flammable plasticizer is a promising path to high energy density, high voltage lithium batteries.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Electrolytes and interphases in Li-ion batteries and beyond10.1021/cr500003w ↗
2. Analyzing system safety in lithium-ion grid energy storage10.1016/j.jpowsour.2015.09.068 ↗
3. Assessing the safety of lithium-ion batteries
4. Optimizing areal capacities through understanding the limitations of lithium-ion electrodes10.1149/2.0321602jes ↗
5. Enabling fast charging of high energy density Li-ion cells with high lithium ion transport electrolytes10.1016/j.elecom.2019.04.013 ↗
6. Effects of electrolyte additives and solvents on unwanted lithium plating in lithium-ion cells10.1149/2.1081706jes ↗
7. Alloy negative electrodes for li-ion batteries10.1021/cr500207g ↗
8. Reviving lithium-metal anodes for next-generation high-energy batteries10.1002/adma.201700007 ↗
9. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
10. Factors that control the formation of dendrites and other morphologies on lithium metal anodes10.3389/fenrg.2019.00115 ↗
11. Polymer electrolytes for high energy density ternary cathode material-based lithium batteries10.1007/s41918-018-00027-x ↗
12. Ionic conductivity in crystalline polymer electrolytes10.1038/35087538 ↗
13. PEO-based composite polymer electrolytes10.1016/S0167-2738(98)00114-3 ↗
14. Differentiated lithium salt design for multilayered PEO electrolyte enables a high‐voltage solid‐state lithium metal battery10.1002/advs.201901036 ↗
15. A multifunctional polymer electrolyte enables ultra-long cycle-life in a high-voltage lithium metal battery10.1039/C7EE03365F ↗
16. Complexes of alkali metal ions with poly(ethylene oxide)10.1016/0032-3861(73)90146-8 ↗
17. Assessment of polymer-electrolyte batteries for EV and ambient temperature applications10.1149/1.2114112 ↗
18. Highly conductive, oriented polymer electrolytes for lithium batteries10.1002/pat.266 ↗
19. A study of cross-linked PEO gel polymer electrolytes using bisphenol A ethoxylate diacrylate: ionic conductivity and mechanical properties10.1016/S0378-7753(03)00183-6 ↗
20. Polymer solid electrolytes - an overview10.1016/0167-2738(83)90083-8 ↗
21. Suppression of lithium dendrite growth using cross-linked polyethylene/poly(ethylene oxide) electrolytes: a new approach for practical lithium-metal polymer batteries10.1021/ja502133j ↗
22. High-speed fabrication of lithium-ion battery electrodes by UV-curing10.1002/ente.201402210 ↗
23. Electron beam curing of composite positive electrode for li-ion battery10.1149/2.1171613jes ↗
24. High–speed electron beam curing of thick electrode for high energy density Li-ion batteries10.1016/j.gee.2019.04.001 ↗
25. Electrochemical properties of cross-linked polymer electrolyte by electron beam irradiation and application to lithium ion batteries10.1016/j.jpowsour.2011.01.054 ↗
26. Electrochemical and mechanical behavior in mechanically robust solid polymer electrolytes for use in multifunctional structural batteries10.1021/cm070213o ↗
27. Synthesis and characterization of network type single ion conductors10.1021/ma035690g ↗
28. Development of dry polymer electrolyte based on polyethylene oxide with co-bridging agent crosslinked by electron beam10.1016/j.ssi.2008.11.015 ↗
29. Cross-linked solid polymer electrolyte for all-solid-state rechargeable lithium batteries10.1016/j.electacta.2016.10.122 ↗
30. Poly(ethylene oxide)-based composite solid polymer electrolyte containing Li7La3Zr2O12 and poly(ethylene glycol) dimethyl ether10.1016/j.memsci.2019.117538 ↗
31. Effect of plasticizers on ionic conductivity and dielectric relaxation of PEO-LiClO 4 polymer electrolyte10.1016/j.electacta.2015.04.178 ↗
32. The plastic-crystalline phase of succinonitrile as a universal matrix for solid-state ionic conductors10.1038/nmat1158 ↗
33. A superionic conductive, electrochemically stable dual-salt polymer electrolyte10.1016/j.joule.2018.06.008 ↗
34. Ceramic and polymeric solid electrolytes for lithium-ion batteries10.1016/j.jpowsour.2010.01.076 ↗
35. Effect of concentration and grain size of alumina filler on the ionic conductivity enhancement of the (PEO)9LiCF3SO3:Al2O3 composite polymer electrolyte10.1016/S0378-7753(03)00262-3 ↗
36. A three-dimensional interconnected polymer/ceramic composite as a thin film solid electrolyte10.1016/j.ensm.2019.12.031 ↗
37. A long cycle life, all-solid-state lithium battery with a ceramic–polymer composite electrolyte10.1021/acsaem.9b02547 ↗
38. Electrochemical measurement of transference numbers in polymer electrolytes10.1016/0032-3861(87)90394-6 ↗
39. Viscoelastic characteristics of UV polymerized poly(ethylene glycol) diacrylate networks with varying extents of crosslinking10.1002/polb.20873 ↗
40. Monodisperse polymeric ionic liquid microgel beads with multiple chemically switchable functionalities10.1021/la401613w ↗
41. Merrill · Polymer-Ceramic Composite Electrolytes for Lithium Batteries: A Comparison between Single-Ion-Conducting Polymer Matrix and Its Counterpart · 2020 · 3 · 887110.1021/acsaem.0c01358 ↗
42. Chen · A Cation Dissociated, Anion Immobilized Gel Composite Electrolyte for Lithium Batteries · 2020
43. MacCallum · 1989
44. The compensation effect in the vogel–tammann–fulcher (VTF) equation for polymer-based electrolytes10.1021/acs.macromol.7b00423 ↗
45. Photocured PEO-based solid polymer electrolyte and its application to lithium–polymer batteries10.1016/S0378-7753(00)00546-2 ↗
46. Selection of new Kynar-based electrolytes for lithium-ion batteries10.1016/S0378-7753(98)00036-6 ↗
47. Highly conductive PEO-like polymer electrolytes10.1021/cm970075a ↗
48. The importance of the lithium ion transference number in lithium/polymer cells10.1016/0013-4686(94)85091-7 ↗
49. Improved performance of solid polymer electrolytes for structural batteries utilizing plasticizing co-solvents10.1002/app.44917 ↗
50. Design of composite polymer electrolytes for Li ion batteries based on mechanical stability criteria10.1016/j.jpowsour.2011.11.020 ↗
51. Facile and scalable fabrication of polymer-ceramic composite electrolyte with high ceramic loadings10.1016/j.jpowsour.2018.04.006 ↗
52. Modifications of crystalline structure of peo polymer electrolytes with ceramic additives10.1016/0167-2738(89)90185-9 ↗
53. A description of the temperature dependence of the conductivity for composite polymeric electrolytes by effective medium theory10.1063/1.357638 ↗
54. Conductivity studies of composite polymeric electrolytes—from experiment to computer modeling10.1016/j.ssi.2004.07.072 ↗
55. Improved li-battery electrolytes by heterogeneous doping of nonaqueous li-salt solutions10.1149/1.1808113 ↗
56. Nonaqueous liquid electrolytes for lithium-based rechargeable batteries10.1021/cr030203g ↗
57. Study of segmental dynamics and ion transport in polymer–ceramic composite electrolytes by quasi-elastic neutron scattering10.1039/C8ME00113H ↗
58. A Nuclear magnetic resonance study of cation and anion dynamics in polymer–ceramic composite solid electrolytes10.1021/acsapm.9b01068 ↗
59. Effects of solvent formulations in electrolytes on fast charging of Li-ion cells10.1016/j.electacta.2020.136453 ↗
60. High-voltage and free-standing poly(propylene carbonate)/Li 6.75 La 3 Zr 1.75 Ta 0.25 O 12 composite solid electrolyte for wide temperature range and flexible solid lithium ion battery10.1039/C6TA10066J ↗