journal article·2020-01-09

Effect of Microstructure on the Corrosion Behavior of as-cast and Extruded Mg–Sn–Y Alloys

Huabao Yang, Liang Wu, Bin Jiang, Wenjun Liu, Hongmei Xie, Jiangfeng Song, Guangsheng Huang, Dingfei Zhang, Fusheng Pan

Publisher page

Abstract

The effect of microstructure on the corrosion behavior of as-cast and extruded Mg–Sn–Y alloys was investigated using measurements of hydrogen evolution, weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy, and scanning Kelvin probe force microscopy. The results showed that the corrosion rate increased in the following order: as-cast, transversal section of bar, and longitudinal section of bar. The higher corrosion rate was related to the refinement of grain size, the micro-galvanic corrosion between second phases and α -Mg matrix, and the micro-galvanic corrosion between different orientated grains. The Volta potentials of Sn 3 Y 5 and MgSnY phases were more positive than that of the α -Mg matrix. Accordingly, the Sn 3 Y 5 and MgSnY phases acted as the cathodes for micro-galvanic corrosion and accelerated the corrosion of α -Mg matrix. After extrusion, the content of second phases reduced and the grain size significantly refined. As a consequence, extrusion increased the corrosion rate of Mg–Sn–Y alloys, as the contribution of grain size refinement to increase the corrosion rate was much bigger than that of the content decrease of second phases to decrease the corrosion rate.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. A review of ionic liquid surface film formation on Mg and its alloys for improved corrosion performance10.1016/j.electacta.2013.03.097 ↗
2. Mechanical properties, corrosion resistance and biocompatibilities of degradable Mg-RE alloys: a review10.1016/j.jmrt.2018.08.003 ↗
3. Effect of long-period stacking ordered phase on microstructure, mechanical property and corrosion resistance of Mg alloys: a review10.1016/j.pnsc.2016.03.006 ↗
4. Review of the atmospheric corrosion of magnesium alloys10.1016/j.jmst.2019.05.001 ↗
5. Selecting medium for corrosion testing of bioabsorbable magnesium and other metals - a critical review10.1016/j.corsci.2020.108722 ↗
6. Stability of twins in Mg alloys - a short review10.1016/j.jma.2020.02.002 ↗
7. Fundamentals and advances in magnesium alloy corrosion10.1016/j.pmatsci.2017.04.011 ↗
8. Understanding magnesium corrosion - a framework for improved alloy performance10.1002/adem.200310405 ↗
9. Corrosion behavior of severely plastic deformed magnesium based alloys: a review10.3103/S1068375517050039 ↗
10. Isothermal precision forging of magnesium alloy components with high performance10.1016/j.proeng.2017.10.848 ↗
11. Microstructure and corrosion properties of Mg-4Zn-2Gd-0.5Ca alloy influenced by multidirectional forging10.1016/j.jallcom.2018.08.191 ↗
12. Microstructure and corrosion behavior of Mg-Sn-Ca alloys after extrusion10.1016/S1003-6326(08)60225-3 ↗
13. Corrosion of hot extrusion AZ91 magnesium alloy. Part II: effect of rare earth element neodymium (Nd) on the corrosion behavior of extruded alloy10.1016/j.corsci.2011.05.035 ↗
14. Corrosion of hot extrusion AZ91 magnesium alloy: I-relation between the microstructure and corrosion behavior10.1016/j.corsci.2011.02.015 ↗
15. A good balance between ductility and stretch formability of dilute Mg-Sn-Y sheet at room temperature10.1016/j.msea.2018.09.011 ↗
16. A micro-alloyed Mg-Sn-Y alloy with high ductility at room temperature10.1016/j.msea.2018.08.035 ↗
17. Influence of crystallographic texture and grain size on the corrosion behaviour of as-extruded Mg alloy AZ31 sheets10.1016/j.corsci.2017.08.004 ↗
18. Enhancement of corrosion resistance and discharge performance of Mg-5Li-3Al-1Zn sheet for Mg-air battery via rolling10.1149/1945-7111/aba339 ↗
19. Effect of surface mechanical attrition treatment on biodegradable Mg-1Ca alloy10.1016/j.msec.2013.11.010 ↗
20. Effects of solution treatment before extrusion on the microstructure, mechanical properties and corrosion of Mg-Zn-Gd alloy in vitro10.1016/j.corsci.2017.01.001 ↗
21. Effect of the crystallographic orientation and twinning on the corrosion resistance of an as-extruded Mg-3Al-1Zn (wt%) bar10.1016/j.scriptamat.2014.06.015 ↗
22. High corrosion resistance and weak corrosion anisotropy of an as-rolled Mg-3Al-1Zn (in wt%) alloy with strong crystallographic texture10.1038/s41598-017-16351-z ↗
23. Influence of texture on corrosion rate of AZ31 Mg alloy in 3.5wt% NaCl10.1016/j.matdes.2011.04.031 ↗
24. A high-strength Mg-Sn-Zn-Al alloy extruded at low temperature10.1016/j.scriptamat.2008.07.042 ↗
25. Heat-treatable Mg-Sn-Zn wrought alloy10.1016/j.scriptamat.2009.03.014 ↗
26. Improved corrosion resistance of extruded Mg-8Sn-1Zn-1Al alloy by microalloying with Mn10.1016/j.scriptamat.2015.07.013 ↗
27. Improved corrosion resistance of Mg-8Sn-1Zn-1Al alloy subjected to low-temperature indirect extrusion10.1016/j.corsci.2018.06.011 ↗
28. Effect of microstructure evolution on corrosion of different crystal surfaces of AZ31 Mg alloy in a chloride containing solution10.1016/j.corsci.2011.09.005 ↗
29. Anisotropy of the crystallographic orientation and corrosion performance of high-strength AZ80 Mg alloy10.1016/j.jma.2015.11.002 ↗
30. Influence of specific second phases on corrosion behaviors of Mg-Zn-Gd-Zr alloys10.1016/j.corsci.2019.108419 ↗
31. Effect of rolling paths and pass reductions on the microstructure and texture evolutions of AZ31 sheet with an initial asymmetrical texture distribution10.1016/j.jallcom.2019.01.385 ↗
32. A closer look at the role of nanometer scale solute-rich stacking faults in the localized corrosion of a magnesium alloy GZ31K10.1149/2.0391807jes ↗
33. The special role of anodic second phases in the micro-galvanic corrosion of EW75 Mg alloy10.1016/j.electacta.2015.12.075 ↗
34. Study on the effect of mischmetal (La,Ce) on the micro-galvanic corrosion of AZ91 alloy using multiscale methods10.1016/j.jallcom.2018.11.030 ↗
35. Effect of Sm additions on the microstructure and corrosion behavior of magnesium alloy AZ9110.1016/j.corsci.2019.01.024 ↗
36. Isothermal sections of the Mg-rich corner in the Mg-Sn-Y ternary system at 300 and 400 °C10.1016/j.jallcom.2009.02.119 ↗
37. High temperature phase stabilized microstructure in Mg-Zn-Sn alloys with Y and Sb additions10.1007/s10853-007-1998-7 ↗
38. Wrought Mg-Al-Pb-RE alloy strips as the anodes for Mg-air batteries10.1016/j.jpowsour.2019.226855 ↗
39. Composite magnesium phosphate coatings for improved corrosion resistance of magnesium AZ31 alloy10.1016/j.corsci.2016.10.010 ↗
40. Influence of pH and chloride ion concentration on the corrosion of Mg alloy ZE4110.1016/j.corsci.2008.08.023 ↗
41. Mg-Ca binary alloys as anodes for primary Mg-air batteries10.1016/j.jpowsour.2018.05.090 ↗
42. Measurement of the corrosion rate of magnesium alloys using Tafel extrapolation10.1016/j.corsci.2009.10.016 ↗
43. Corrosion and discharge behaviors of Mg-Al-Zn and Mg-Al-Zn-In alloys as anode materials10.3390/met6030065 ↗
44. Effect of hot rolling on the microstructure and discharge properties of Mg-1.6 wt%Hg-2 wt%Ga alloy anodes10.1016/j.jallcom.2018.05.070 ↗
45. Composition and microstructure dependent corrosion behaviour of Mg-Li alloys10.1016/j.electacta.2017.11.091 ↗
46. Influence of microstructure on the corrosion of diecast AZ80D10.1016/S0010-938X(98)00121-8 ↗
47. Corrosion behavior of Mg-3Gd-1Zn-0.4Zr alloy with and without stacking faults10.1016/j.jma.2019.02.009 ↗
48. Corrosion behavior of Mg-Mn-Ca alloy: influences of Al, Sn and Zn10.1016/j.jma.2018.11.004 ↗
49. Effect of Sn addition on the mechanical properties and bio-corrosion behavior of cytocompatible Mg-4Zn based alloys10.1016/j.jma.2019.02.002 ↗
50. Influence of yttrium element on the corrosion behaviors of Mg-Y binary magnesium alloy10.1016/j.jma.2016.12.002 ↗
51. Mechanical and corrosion behaviour of hydroxyapatite reinforced Mg-Sn alloy composite by squeeze casting for biomedical applications10.1016/j.jma.2019.05.010 ↗
52. The corrosion behavior and mechanical property of the Mg-7Y-xNd ternary alloys10.1016/j.jma.2018.09.002 ↗
53. Microstructure and corrosion behavior of as-extruded Mg-6.5Li-xY-yZn alloys10.1016/j.jallcom.2020.153839 ↗
54. Discharge performance of the magnesium anodes with different phase constitutions for Mg-air batteries10.1016/j.jpowsour.2018.06.085 ↗
55. Effect of grain size and twins on corrosion behaviour of AZ31B magnesium alloy10.1016/j.corsci.2009.10.018 ↗
56. Effect of grain size on the electrochemical behavior of pure magnesium anode10.1016/j.jma.2017.09.003 ↗
57. Effect of crystallographic orientation on the discharge and corrosion behaviour of AP65 magnesium alloy anodes10.1016/j.corsci.2018.08.003 ↗
58. Role of the LPSO structure in the improvement of corrosion resistance of Mg-Gd-Zn-Zr alloys10.1016/j.jallcom.2018.12.233 ↗
59. Corrosion behavior of equal-channel-angular-pressed pure magnesium in NaCl aqueous solution10.1016/j.corsci.2009.10.004 ↗
60. Influence of hot rolling on the corrosion behavior of several Mg-X alloys10.1016/j.corsci.2014.10.012 ↗
61. Grain boundary segregation of rare-earth elements in magnesium alloys10.1007/s11661-015-3199-3 ↗
62. Clarifying the roles of grain boundary and grain orientation on the corrosion and discharge processes of α-Mg based Mg-Li alloys for primary Mg-air batteries10.1016/j.jmst.2020.05.067 ↗
63. Crystallographic orientation and electrochemical activity of AZ31 Mg alloy10.1016/j.elecom.2010.05.011 ↗