Odd Random Phase Electrochemical Impedance Spectroscopy to Study the Corrosion Behavior of Hot Dip Zn and Zn-Alloy Coated Steel Wires in Sodium Chloride Solution
Source abstract
Abstract
Electrochemical impedance spectroscopy (EIS) is a very popular technique to investigate the corrosion behavior of metals and alloys in electrolytes. To interpret the EIS data, an equivalent electrical circuit (EEC) is built and the corrosion behavior can be explained on the basis of the values obtained for each element of the EEC after fitting the impedance data. Hence, the reliability of the interpretation greatly depends on the selection of the EEC for the impedance modeling. In this work, odd random phase electrochemical impedance spectroscopy (ORP-EIS) is used to investigate the corrosion behavior of Zn, Zn-Al and Zn-Al-Mg hot dip coated steel wires in 0.1 M NaCl. ORP-EIS uses a multisine excitation signal to obtain the impedance response of the electrochemical system. It is faster than conventional EIS as well as provides accurate information about linearity, stationarity and noise distortions of the system during the measurement. This is used to optimize the experimental conditions and to evaluate the correctness of the data modeling. The corrosion behavior of the metallic coated steel wires is quantified by EIS modeling. The validity of the proposed EEC is assessed based on the physical phenomena as well as the statistical evaluation of the modeling results.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Non-Destructive Testing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. 10.1016/S0079-6425(98)00006-110.1016/S0079-6425(98)00006-1 ↗
2. Zhang X. G. , Corrosion and Electrochemistry of Zinc, Plenum Press, New York and London, 1996.10.1007/978-1-4757-9877-7 ↗
3. Barnhurst R. J. Beliste S. , Corrosion Properties of Z5AMak and ZA Alloys, Noranda Technology Centre, Quebec, Canada, 1992.
4. 10.1016/j.corsci.2009.06.02810.1016/j.corsci.2009.06.028 ↗
5. 10.1155/2012/41964010.1155/2012/419640 ↗
6. 10.1016/S0010-938X(98)00073-010.1016/S0010-938X(98)00073-0 ↗
7. 10.1007/BF0103018510.1007/BF01030185 ↗
8. 10.1016/j.electacta.2006.08.05010.1016/j.electacta.2006.08.050 ↗
9. 10.1016/j.surfcoat.2004.04.02310.1016/j.surfcoat.2004.04.023 ↗
10. 10.1016/j.conbuildmat.2008.07.00210.1016/j.conbuildmat.2008.07.002 ↗
11. 10.1016/j.corsci.2011.03.01610.1016/j.corsci.2011.03.016 ↗
12. 10.1016/j.corsci.2006.12.00810.1016/j.corsci.2006.12.008 ↗
13. Tsujimura T. Komatsu A. Andoh A. , “Influence of Mg content in coating layer and coating structure on corrosion resistance of hot-dip Zn–Al–Mg alloy coated steel sheet,” in: Proceedings of the Galvatech ‘01, International Conference on Zinc and Zinc Alloy Coated Steel, June 26–28, Brussels, Belgium, 2001, pp. 145.
14. 10.1016/j.corsci.2010.05.04410.1016/j.corsci.2010.05.044 ↗
15. 10.1016/j.corsci.2009.03.00510.1016/j.corsci.2009.03.005 ↗
16. 10.1016/j.corsci.2007.03.03210.1016/j.corsci.2007.03.032 ↗
17. 10.1016/j.corsci.2007.03.03210.1016/j.corsci.2007.03.032 ↗
18. 10.1016/j.surfcoat.2010.10.00610.1016/j.surfcoat.2010.10.006 ↗
19. 10.1016/j.corsci.2014.07.04210.1016/j.corsci.2014.07.042 ↗
20. 10.1016/j.corsci.2009.06.01910.1016/j.corsci.2009.06.019 ↗
21. Komatsu A. Tsujimura T. Watanabe K. Yamaki N. Andoh A. Kittaka T. , “Hot dip Zn–Al–Mg coated steel sheet excellent in corrosion resistance and surface appearance and process for the production thereof,” Nisshin Steel Corporation, Pat. EP0905270, (1999).
22. Hagler J. Angeli G. Ebner D. Luckeneder G. Fleischanderl M. Schatzl M. , “New zinc-magnesium-alloy coatings for building and construction industry,” Proceedings of the Eurosteel 08, September 3–5 Graz, Austria, 2008, 1.
23. 10.1016/j.corsci.2012.03.01510.1016/j.corsci.2012.03.015 ↗
24. 10.1016/j.conbuildmat.2014.05.05310.1016/j.conbuildmat.2014.05.053 ↗
25. 10.1016/j.corsci.2010.08.01810.1016/j.corsci.2010.08.018 ↗
26. 10.1016/j.electacta.2008.08.06310.1016/j.electacta.2008.08.063 ↗
27. 10.1002/maco.20140805810.1002/maco.201408058 ↗
28. 10.1016/j.corsci.2008.02.01010.1016/j.corsci.2008.02.010 ↗
29. EIS Investigation and Structural Characterization of Different Hot-Dipped Zinc-Based Coatings in 3.5% NaCl Solution10.1016/S1452-3981(23)12843-4 ↗
30. 10.1016/j.jelechem.2004.09.02910.1016/j.jelechem.2004.09.029 ↗
31. 10.1002/elan.20080447110.1002/elan.200804471 ↗
32. 10.1016/j.electacta.2004.05.03910.1016/j.electacta.2004.05.039 ↗
33. 10.1016/j.electacta.2013.09.15910.1016/j.electacta.2013.09.159 ↗
34. 10.1016/j.corsci.2016.11.01810.1016/j.corsci.2016.11.018 ↗
35. 10.1016/j.elecom.2009.10.00810.1016/j.elecom.2009.10.008 ↗
36. Macdonald J. R. , (Ed.), Impedance Spectroscopy. Emphasizing Solid Materials and Systems, John Wiley & Sons, Inc., 1987.
37. 10.1016/j.electacta.2014.05.02710.1016/j.electacta.2014.05.027 ↗
38. 10.1016/j.porgcoat.2010.04.00810.1016/j.porgcoat.2010.04.008 ↗
39. 10.1016/j.electacta.2008.01.05210.1016/j.electacta.2008.01.052 ↗
40. 10.1016/j.jallcom.2016.02.02610.1016/j.jallcom.2016.02.026 ↗
41. 10.1016/0010-938X(85)90070-810.1016/0010-938X(85)90070-8 ↗
42. Dean S. W. France W. D. Jr. Ketcham S. J. , ““Electrochemical Methods,” in Handbook on Corrosion Testing and Evaluation, Ailor W. H. , Ed., John Wiley, New York, 1971, pp. 173.
43. 10.1016/j.corsci.2014.05.01610.1016/j.corsci.2014.05.016 ↗
44. 10.1016/j.corsci.2008.06.00810.1016/j.corsci.2008.06.008 ↗
45. 10.1016/j.corsci.2013.03.00510.1016/j.corsci.2013.03.005 ↗
46. 10.1016/j.electacta.2013.03.00810.1016/j.electacta.2013.03.008 ↗
47. 10.1016/S0013-4686(02)00277-310.1016/S0013-4686(02)00277-3 ↗
48. 10.1007/BF0102959310.1007/BF01029593 ↗
49. 10.1016/S0010-938X(03)00193-810.1016/S0010-938X(03)00193-8 ↗
50. 10.1016/0010-938X(89)90077-210.1016/0010-938X(89)90077-2 ↗
51. 10.1149/1.216837710.1149/1.2168377 ↗
52. 10.1007/BF0061519410.1007/BF00615194 ↗