Comparing Electrochemical Impedance Spectroscopy Methods for Estimating the Degree of Delamination of Organic Coatings on Steel
Source abstract
Abstract
Electrochemical impedance spectroscopy (EIS) was used to evaluate the degree of delamination of the epoxy primer Uniprime ED‐4 1 electrocoated on phosphate‐treated cold‐rolled steel in 3.5% exposed to air. Specimens with coating thicknesses of 20.3 and 20.8 μm and surface areas of 78.5 cm 2 were used. Coating parameters were obtained using a circuit‐analog model. The area of delamination was estimated using several EIS parameters, including the pore resistance and the break point frequency. These values were compared to the corroded area determined visually. All methods considered exhibited a strong correlation over some or all of the range of exposure times.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Center for Electrochemical Engineering, Department of Chemical Engineering, Texas A&M University, College Station, Texas 77843‐3122
Department of Mechanical Engineering, Texas A&M University, College Station, Texas 77843‐3122
References
Reference metadata was not supplied for this record.