article·2004-12-22

Estimation of Charge-Transfer Resistivity of La[sub 0.8]Sr[sub 0.2]MnO[sub 3] Cathode on Y[sub 0.16]Zr[sub 0.84]O[sub 2] Electrolyte Using Patterned Electrodes

Rajesh Radhakrishnan, Anil V. Virkar, Subhash C. Singhal

Publisher page

Abstract

Yttria-stabilized zirconia (YSZ) electrolyte disks with patterned Sr-doped (LSM) electrodes having different three-phase boundary (TPB) lengths but the same electrode-electrolyte interface area, were prepared using photomicrolithography. Impedance spectra for half-cells were obtained under oxygen partial pressures; ranging from to 1 atm and temperatures from 650 to 800°C. Area specific charge-transfer resistance, was found to vary inversely with While the charge-transfer resistance is inversely proportional to consistent with the charge-transfer reaction occurring mainly at the TPB, at 800°C some transport through LSM also appears to occur. The estimated value of charge-transfer resistivity, corresponding to the charge-transfer reaction occurring at the TPB in air at 800°C Ω cm), is in good agreement with that estimated from actual fuel cell tests using quantitative stereological analysis of LSM-YSZ composite electrodes. and were found to decrease with increasing and with increasing temperature. The activation energy for the overall charge-transfer reaction was estimated to be ∼1.5 eV. © 2004 The Electrochemical Society. All rights reserved.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Fuel Cells and Related Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.