Water Management in Zero-Gap CO2 Electrolyzer with Forward Bias Bipolar Membranes
Source abstract
Abstract
CO2 electrolysis is a promising process to produce synthetic and carbon-neutral chemicals. Zero-gap CO2 electrolyzers featuring a forward bias bipolar membrane (BPM) solve problems like salt precipitation and CO2 crossover but still suffer from limited performance and durability. Their relatively low efficiency could be attributed to water management: excess in the diffusion media causing flooding or deficit for the CO2 reduction reaction. This work investigates the main water transport mechanisms, including identifying water sources and sinks and the experimental analysis of the diffusive transport and sorption in the BPM. Operando x-ray tomography reveals water distribution within the gas diffusion media and membrane swelling behavior. The set of experiments shows the intrinsic limitations of the forward bias BPM cell at industrially relevant current densities: insufficient water supply for the cathode reaction and current-driven BPM over-swelling. GDL flooding can be excluded as a limitation at the investigated current densities.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fuel Cells and Related Materials · Hybrid Renewable Energy Systems · CO2 Reduction Techniques and Catalysts
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. What would it take for renewably powered electrosynthesis to displace petrochemical processes?10.1126/science.aav3506 ↗
2. General techno-economic analysis of CO2 electrolysis systems10.1021/acs.iecr.7b03514 ↗
3. The future of low-temperature carbon dioxide electrolysis depends on solving one basic problem
4. Carbon monoxide gas diffusion electrolysis that produces concentrated C2 products with high single-pass conversion10.1016/j.joule.2018.10.007 ↗
5. CO2 electrolyzers10.1021/acs.chemrev.3c00206 ↗
6. Visualisation and quantification of flooding phenomena in gas diffusion electrodes used for electrochemical CO2 reduction: a combined EDX/ICP—MS approach10.1016/j.jcat.2022.02.014 ↗
7. Investigating electrode flooding in a flowing electrolyte, gas-fed carbon dioxide electrolyzer10.1002/cssc.201902547 ↗
8. High-resolution neutron imaging of salt precipitation and water transport in zero-gap CO2 electrolysis. en10.1038/s41467-022-33694-y ↗
9. In operando investigations of oscillatory water and carbonate effects in MEA-based CO2 electrolysis devices10.1016/j.joule.2023.01.013 ↗
10. Changes in permselectivity of radiation-grafted anion-exchange membranes with different cationic headgroup chemistries are primarily due to water content differences10.1039/D3MA00082F ↗
11. Quantification of water transport in a CO2 electrolyzer10.1039/D0EE02219E ↗
12. Probing the effect of ionomer swelling on the stability of anion exchange membrane water electrolyzers10.1016/j.jpowsour.2022.232134 ↗
13. Unveiling transport mechanisms of cesium and water in operando zero-gap CO2 electrolyzers10.1016/j.joule.2024.02.027 ↗
14. Effect of CO2 absorption on ion and water mobility in an anion exchange membrane10.1016/j.jpowsour.2018.01.071 ↗
15. Non-invasive current collectors for improved current-density distribution during CO2 electrolysis on super-hydrophobic electrodes. en10.1038/s41467-023-42348-6 ↗
16. Managing hydration at the cathode enables efficient CO2 electrolysis at commercially relevant current densities10.1021/acsenergylett.0c00637 ↗
17. Cracks as efficient tools to mitigate flooding in gas diffusion electrodes used for the electrochemical reduction of carbon dioxide10.1002/smtd.202200369 ↗
18. Anion-exchange membranes with internal microchannels for water control in CO2 electrolysis10.1039/D2SE00858K ↗
19. Direct water injection in catholyte-free zero-gap carbon dioxide electrolyzers10.1002/celc.202000961 ↗
20. Enriching surface-accessible CO2 in the zero-gap anion-exchange-membrane-based CO2 electrolyzer10.1002/anie.202214383 ↗
21. Deriving an efficient and stable microenvironment for a CO2 MEA electrolyzer by reverse osmosis10.1021/acsenergylett.4c00933 ↗
22. Pure-water-fed, electrocatalytic CO2 reduction to ethylene beyond 1,000 h stability at 10 A10.1038/s41560-023-01415-4 ↗
23. Bipolar Membrane with Porous Anion Exchange Layer for Efficient and Long-Term Stable Electrochemical Reduction of CO2 to CO10.1002/aenm.202301614 ↗
24. Direct Membrane Deposition for CO2 Electrolysis10.1021/acsenergylett.3c01716 ↗
25. Design principles of bipolar electrochemical co-electrolysis cells for efficient reduction of carbon dioxide from gas phase at low temperature10.1149/2.1221816jes/meta ↗
26. High indirect energy consumption in AEM-based CO2 electrolyzers demonstrates the potential of bipolar membranes10.1021/acsami.1c16513 ↗
27. Analysis of mass flows and membrane cross-over in CO2 reduction at high current densities in an MEA-type electrolyzer10.1021/acsami.9b13081 ↗
28. Assessing the electrochemical CO2 reduction reaction performance requires more than reporting coulombic efficiency10.1002/aesr.202400031 ↗
29. Performance of five commercial bipolar membranes under forward and reverse bias conditions for acid-base flow battery applications10.1016/j.memsci.2021.119748 ↗
30. Investigation and optimisation of operating conditions for low-temperature CO2 reduction to CO in a forward-bias bipolar-membrane electrolyser10.1149/1945-7111/abf063 ↗
31. Gas-induced structural damages in forward-bias bipolar membrane CO2 electrolysis studied by fast x-ray tomography10.1021/acsaem.3c02882 ↗
32. Insights and challenges for applying bipolar membranes in advanced electrochemical energy systems10.1021/acsenergylett.1c00618 ↗
33. Thin cation-exchange layers enable high-current-density bipolar membrane electrolyzers via improved water transport10.1021/acsenergylett.0c02078 ↗
34. Current-voltage curve of a bipolar membrane at high current density10.1016/0011-9164(96)00021-5 ↗
35. Behaviour of bipolar membranes at high current density: water diffusion limitation10.1016/S1383-5866(98)00058-6 ↗
36. Towards membrane-electrode assembly systems for CO2 reduction: a modeling study10.1039/C9EE00909D ↗
37. Modelling water transport limitations and ionic voltage losses in bipolar membrane water electrolysis10.1149/1945-7111/acd02c ↗
38. The water content dependence of electro-osmotic drag in proton-conducting polymer electrolytes10.1016/0013-4686(94)00277-8 ↗
39. Electro-osmotic drag of water in poly(perfluorosulfonic acid) membranes. en10.1149/1.1344521 ↗
40. High pressure polymer electrolyte water electrolysis: test bench development and electrochemical analysis10.1016/j.ijhydene.2017.01.224 ↗
41. Effect of polymer architecture on the nanophase segregation, ionic conductivity, and electro-osmotic drag of anion exchange membranes10.1021/acs.jpcc.9b01165 ↗
42. Assessing the effects of crowding, pore size, and interactions on electro-osmotic drag coefficients10.1021/jp410910r ↗
43. Estimation of the effective water diffusion coefficient in Nafion©membrane by water balance measurements10.1002/fuce.202000150 ↗
44. A Quasielastic neutron scattering study of water diffusion in model anion exchange membranes over localized and extended volume increments10.1021/acs.jpcc.9b01873 ↗
45. Calculation of water diffusion coefficients in an anion exchange membrane using a water permeation technique10.1149/1.3585834 ↗
46. Improved magnus form approximation of saturation vapor pressure10.1175/1520-0450(1996)035<0601:IMFAOS>2.0.CO;2 ↗
47. Four-dimensional imaging and free-energy analysis of sudden pore-filling events in wicking of yarns10.1103/PhysRevE.103.053101 ↗
48. Droplet and percolation network interactions in a fuel cell gas diffusion layer10.1149/1945-7111/ab8c85 ↗
49. Techniques for high-fidelity x-ray micro-tomography of additively manufactured metal components10.1080/10589759.2020.1778684 ↗
50. A general framework and review of scatter correction methods in x-ray cone-beam computerized tomography. Part 1: Scatter compensation approaches10.1118/1.3599033 ↗
51. A general framework and review of scatter correction methods in cone beam CT. Part 2: scatter estimation approaches10.1118/1.3589140 ↗
52. Trainable weka segmentation: a machine learning tool for microscopy pixel classification. eng10.1093/bioinformatics/btx180 ↗
53. Fiji: an open-source platform for biological-image analysis. en10.1038/nmeth.2019 ↗
54. Diffusion and interfacial transport of water in nafion10.1021/jp1112125 ↗
55. en10.1007/430_2011_41 ↗
56. Coupling of sorption and deformation in soft nanoporous polymers: Molecular simulation and poromechanics10.1016/j.jmps.2019.103830 ↗
57. Water uptake study of anion exchange membranes10.1021/acs.macromol.8b00034 ↗
58. Water-sorption and transport properties of Nafion 117 H10.1002/app.1993.070500816 ↗
59. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)10.1515/pac-2014-1117/html ↗
60. Discrepancy of effective water diffusivities determined from dynamic vapor sorption measurements with different relative humidity step sizes: observations from cereal materials10.3390/foods12071470 ↗
61. Structure-transport relationships of poly(aryl piperidinium) anion-exchange membranes: Eeffect of anions and hydration10.1016/j.memsci.2019.117680 ↗
62. How alkali cations affect salt precipitation and CO2 electrolysis performance in membrane electrode assembly electrolyzers10.1039/D2EE03725D ↗
63. Carbonate ion crossover in zero-gap, KOH anolyte CO2 electrolysis10.1021/acs.jpcc.1c08430 ↗
64. Improving water management in fuel cells through microporous layer modifications: fast operando tomographic imaging of liquid water10.1016/j.jpowsour.2019.226809 ↗
65. Operando properties of gas diffusion layers: saturation and liquid permeability10.1149/2.0881702jes/meta ↗
66. Saturation dependent effective transport properties of PEFC gas diffusion layers10.1149/2.005209jes/meta ↗
67. Pure-water-fed forward-bias bipolar membrane CO2 electrolyzer10.1021/acsami.4c02799 ↗