A novel UV-curing liner for NEPE propellant: Insight from molecular simulations
Source abstract
Abstract
Abstract In this paper, a new simulation strategy was proposed for constructing the UV-curing crosslinking model by using computational programming. Based on this algorithm, the UV curing model of polyurethane acrylate (PUA) liner was effectively built at a molecular scale. Molecular dynamics (MD) simulations were first conducted to estimate the mechanical properties and thermal transition behavior, and the simulated results were a good agreement with the experimentally measured values. Then, the solubility parameters and radial distribution function (RDF) were calculated to get an in-depth understanding of the interface interaction between the liner and other components. Finally, we calculated the diffusion coefficient of nitrate plasticizer molecules in the liner and explored the influencing factors. The dynamic behavior of the nitrate plasticizer in the liner interface was also investigated, and the results demonstrated that PUA liner could effectively prevent the migration of plasticizer because of the higher crosslink density. These researches help us deeply understand the structure-property correlation and provide molecular insight into the mechanisms of nitrate plasticizer migration, which was useful for the structure design and material selection of NEPE propellant liner.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Energetic Materials and Combustion · Polymer crystallization and properties · Thermal and Kinetic Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Boyars · 1969 · 165
2. Study on the polyurethane liner with double function
3. The advance of liner technique in solid rocket engine
4. Effect of ingredient migration on interface bonding properties of NEPE propellant
5. Nitroglycerine (NG) migration to various unsaturated polyesters and chloropolyesters used for inhibition of rocket propellants10.1002/(SICI)1521-4087(199912)24:6<371::AID-PREP371>3.0.CO;2-L ↗
6. Investigation of acetyl ferrocene migration from hydroxylterminated polybutadiene based elastomers by means of ultraviolet-visible and atomic absorption spectroscopic techniques10.1002/app.21624 ↗
7. In-situ characterization and cure kinetics in NEPE propellant/HTPB liner interface by microscopic FT-IR10.1002/prep.201600087 ↗
8. Evaporation of plasticizer from NEPE type propellant10.1134/S1070427218050117 ↗
9. UV-curing science and technology
10. Cure-on-command technology: a review of the current state of the art10.1016/j.porgcoat.2016.02.014 ↗
11. Synthesis of UV-curing waterborne polyurethane-acrylate coating and its photopolymerization kinetics using FT-IR and photo-DSC methods10.1016/j.porgcoat.2018.05.008 ↗
12. Highly stretchable hydrogels for UV curing based high-resolution multimaterial 3D printing10.1039/C8TB00673C ↗
13. Photonic curing of aromatic thiol-ene click dielectric capacitors via inkjet printing10.1039/C4TA04030A ↗
14. Study on new UV curing liner of solid rocket motor
15. Research on tensile mechanical properties and damage mechanism of composite solid propellants10.1002/prep.201700190 ↗
16. Migration kinetics and mechanisms of plasticizers, stabilizers at interfaces of NEPE propellant/HTPB liner/EDPM insulation10.1016/j.jhazmat.2012.05.103 ↗
17. Nitroglycerine migration to polyurethane used for inhibition of double-base propellants through thermal analysis techniques10.1007/s10973-016-5457-z ↗
18. Recent advances on research of adhesive interfaces between NEPE propellants and HTPB liner
19. Insights on the capillary transport mechanism in the sustainable cement hydrate impregnated with graphene oxide and epoxy composite10.1016/j.compositesb.2019.106907 ↗
20. Molecular dynamics modeling of the structure, dynamics, energetics and mechanical properties of cement-polymer nanocomposite10.1016/j.compositesb.2018.12.142 ↗
21. Exploration of the nanostructures and separation properties of cross-linked mixed matrix membranes using multiscale modeling10.1016/j.memsci.2017.08.061 ↗
22. Molecular dynamics simulation study on the mechanism of NPBA enhancing interface strength of NEPE propellant10.1016/j.apsusc.2019.07.015 ↗
23. Influence of electrostatic field on the adsorption of phenol on single-walled carbon nanotubes: a study by molecular dynamics simulation10.1016/j.cej.2019.01.146 ↗
24. Separation of gases by using pristine, composite and nanocomposite polymeric membranes: a molecular dynamics simulation study10.1016/j.memsci.2017.06.010 ↗
25. Elastic interphase properties of nanoparticle/epoxy nanocomposites: a molecular dynamics study10.1016/j.compositesb.2019.107211 ↗
26. Molecular dynamics studies of the mechanical behaviors and thermal conductivity of the DGEBA/MTHPA/CNB composites10.1016/j.compositesb.2019.01.069 ↗
27. Molecular modeling of cross-linked polymers with complex cure pathways: a case study of bismaleimide resins10.1021/acs.macromol.7b01979 ↗
28. Computing thermomechanical properties of crosslinked epoxy by molecular dynamic simulations10.1016/j.polymer.2012.08.045 ↗
29. Kinetic study and new applications of UV radiation curing10.1002/marc.200290014 ↗
30. Curing of composite components by ultraviolet radiation: a review10.1002/pc.20166 ↗
31. Photopolymerization monitoring of ceramic stereolithography resins by FTIR methods10.1007/s10853-005-5689-y ↗
32. Effect of different photoinitiator systems on conversion profiles of a model unfilled light-cured resin10.1016/j.dental.2006.11.010 ↗
33. COMPASS: an ab initio force-field optimized for condensed-phase applications overview with details on alkane and benzene compounds10.1021/jp980939v ↗
34. Thermodynamic properties and free volume Analyses of polycarbonates by a combined experimental and molecular simulation method10.1021/acs.iecr.5b01008 ↗
35. Modeling the formation and thermomechanical properties of polybenzoxazine thermosets10.1039/C7PY00995J ↗
36. Weiner · 2002
37. Multiscale simulation study on the curing reaction and the network structure in a typical epoxy system10.1021/ma201390k ↗
38. Molecular dynamics simulation study of norbornene-POSS polymers10.1016/S0032-3861(00)00072-0 ↗
39. Character of the glass transition in thin supported polymer films10.1103/PhysRevE.63.021501 ↗
40. Second-order transition temperatures and related properties of polystyrene. I. Influence of molecular weight10.1063/1.1699711 ↗
41. The use of solubility parameters in pharmaceutical dosage form design10.1016/S0378-5173(96)04828-4 ↗
42. Analysis of explosives using infrared spectroscopy10.1021/ac60160a013 ↗
43. Study on concentrated solution of nitrocellulose: solubility parameters and system compatibility
44. Mesoscale dynamic simulation on phase separation between plasticizer and binder in NEPE propellants10.1016/j.polymer.2008.04.020 ↗
45. Aging study of neoprene FB uncured rubber in support of an obsolescence issue for EPDM rubber insulation used in the Reusable Solid Rocket Motor of the Space Shuttle10.1016/S0040-6031(00)00401-9 ↗
46. Selection of excipients for melt extrusion with two poorly water-soluble drugs by solubility parameter calculation and thermal analysis10.1016/S0378-5173(01)00801-8 ↗
47. Molecular dynamics and dissipative particle dynamics simulations for the miscibility of poly (ethylene oxide)/poly (vinyl chloride) blends10.1016/j.polymer.2009.11.024 ↗
48. pH-sensitive drug loading/releasing in amphiphilic copolymer PAE-PEG: integrating molecular dynamics and dissipative particle dynamics simulations10.1016/j.jconrel.2012.06.027 ↗
49. Comparative study on structure, energetic and mechanical properties of a ε-CL-20/HMX cocrystal and its composite with molecular dynamics simulation10.1039/C4TA01150C ↗
50. Diffusion of gases in silicone polymers: molecular dynamics simulations10.1021/ma980387e ↗
51. Molecular dynamics modeling of the structure, dynamics, energetics and mechanical properties of cement-polymer nanocomposite10.1016/j.compositesb.2018.12.142 ↗
52. Diffusion rates and the role of diffusion in solid propellant rocket motor adhesion10.1002/app.25086 ↗
53. Transport of small molecules in polyolefins. I. Diffusion of irganox 1010 in polyethylene10.1002/app.1992.070460317 ↗
54. Atomistic packing models for experimentally investigated swelling states induced by CO2 in glassy polysulfone and poly (ether sulfone)10.1002/polb.20844 ↗