Performance of a Non-Aqueous Vanadium Acetylacetonate Prototype Redox Flow Battery: Examination of Separators and Capacity Decay

Non-aqueous electrolytes are stable over wide electrochemical potential windows, generally >2 V, and therefore hold promise for enabling higher energy and power density redox flow batteries (RFBs). Nevertheless, the development of non-aqueous RFBs is at an early stage and significant research efforts are needed to demonstrate non-aqueous RFBs with performance characteristics that exceed those of aqueous RFBs. The membrane or separator is a critical component that to a great extent determines the performance of RFB systems for practical applications. In this work, the performance of a RFB was evaluated with Nafion 1035 membranes and Daramic 175 SLI microporous separators. The non-aqueous electrolyte was based on vanadium (III) acetylacetonate. This chemistry possesses two couples over ∼2.2 V. Charge-discharge cycles were performed in a RFB at a current density of 10 mA cm −2 . Coulombic and energy efficiencies of 91% and 80% were achieved using the Nafion membrane. A similar RFB using the Daramic microporous separator achieved columbic and energy efficiencies of 73% and 68%, respectively. The source of capacity decay during multiple charge-discharge cycles was also investigated. The loss in the capacity was related to the poor chemical stability of the vanadium acetylacetonate in the positive electrolyte during battery cycling.