Review—Interfaces: Key Issue to Be Solved for All Solid-State Lithium Battery Technologies
Source abstract
Abstract
All solid-state lithium batteries (ASSLBs) employing inorganic solid electrolytes or solid polymer electrolytes are attracting increasing interests for electrochemical energy storage devices due to their advantages of high energy density, high safety, wide operating temperature range and long cycle life. However, the large interfacial resistance originated from the insufficient solid-solid contact at electrolyte/electrode interface hinders the development of ASSLBs. In addition, the interfacial stability and compatibility also greatly affect the electrochemical performance of batteries. To realize the ASSLB’s application requires significant research in solid electrolyte materials and solid electrolyte/electrode interfaces. This review summarizes the research and development in solid electrolyte materials and the interfaces of solid electrolyte/electrode, paying special attention to the challenges and progress for the studies of interface issues in ASSLBs. Based on the overview, we attempt to propose approaches to the issue by interface engineering and prospective developments of ASSLBs.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Thermal Expansion and Ionic Conductivity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Lithium ion secondary batteries: past 10 years and the future10.1016/S0378-7753(01)00887-4 ↗
2. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
3. Progress in solid electrolytes toward realizing solid-state lithium batteries10.1016/j.jpowsour.2018.05.003 ↗
4. A solid future10.1038/526S96a ↗
5. Progress and prospective of solid-state lithium batteries10.1016/j.actamat.2012.10.034 ↗
6. Electrochemical performance of an all-solid-state lithium ion battery with garnet-type oxide electrolyte10.1016/j.jpowsour.2011.10.064 ↗
7. Bendable and thin sulfide solid electrolyte film: a new electrolyte opportunity for free-standing and stackable high-energy all- solid-state lithium batteries10.1021/acs.nanolett.5b00538 ↗
8. Building better batteries10.1038/451652a ↗
9. Review-practical challenges hindering the development of solid state Li ion batteries10.1149/2.1571707jes ↗
10. All-solid-state lithium secondary batteries using LiCoO2 particles with pulsed laser deposition coatings of Li2S–P2S5 solid electrolytes10.1016/j.jpowsour.2010.10.103 ↗
11. Interface engineering of sulfide electrolytes for all-solid-state lithium batteries10.1016/j.nanoen.2018.09.061 ↗
12. Sputtering of lithium compounds for preparation of electrolyte thin films10.1016/0167-2738(92)90443-S ↗
13. Electrical properties of amorphous lithium electrolyte thin films10.1016/0167-2738(92)90442-R ↗
14. A lithium superionic conductor10.1038/nmat3066 ↗
15. Lithium battery chemistries enabled by solid-state electrolytes10.1038/natrevmats.2016.103 ↗
16. Promises, challenges, and recent progress of inorganic solid-state electrolytes for all-solid-state lithium batteries10.1002/adma.201705702 ↗
17. Synthesis, structural characterization, and lithium ion conductivity of the lithium thiophosphate Li2P2S610.1021/acs.inorgchem.7b00751 ↗
18. Structural change of Li2S–P2S5 sulfide solid electrolytes in the atmosphere10.1016/j.ssi.2010.10.013 ↗
19. Review-Solid electrolytes for safe and high energy density lithium-sulfur batteries: promises and challenges10.1149/2.0041801jes ↗
20. Improved lithium-ion transport in NASICON-type lithium titanium phosphate by calcium and iron doping10.1016/j.ssi.2013.09.012 ↗
21. Lithium lanthanum titanates: a review10.1021/cm0300516 ↗
22. Garnet-type solid-state fast Li ion conductors for Li batteries: critical review10.1039/c4cs00020j ↗
23. Recent advances in solid polymer electrolytes for lithium batteries10.1007/s12274-017-1763-4 ↗
24. Polymer electrolytes for lithium-based batteries: advances and prospects10.1016/j.chempr.2019.05.009 ↗
25. Review on solid electrolytes for all-solid-state lithium-ion batteries10.1016/j.jpowsour.2018.04.022 ↗
26. The development and future of lithium ion batteries10.1149/2.0251701jes ↗
27. Design principles for solid-state lithium superionic conductors10.1038/nmat4369 ↗
28. A solid future for battery development10.1038/nenergy.2016.141 ↗
29. Evaluation of elastic modulus of Li2S-P2S5 glassy solid electrolyte by ultrasonic sound velocity measurement and compression test10.2109/jcersj2.121.946 ↗
30. Superionic conduction in Li2S-P2S5-LiI – glasses10.1016/0167-2738(81)90341-6 ↗
31. Preparation and characterization of superionic conducting Li7P3S11 crystal from glassy liquids10.2109/jcersj2.118.305 ↗
32. New, highly ion-conductive crystals precipitated from Li2S–P2S5 glasses10.1002/adma.200401286 ↗
33. A sulphide lithium super ion conductor is superior to liquid ion conductors for use in rechargeable batteries10.1039/C3EE41655K ↗
34. High-power all-solid-state batteries using sulfide superionic conductors10.1038/nenergy.2016.30 ↗
35. Synthesis and characterization of argyrodite solid electrolytes for all solid-state Li-ion batteries10.1016/j.jallcom.2018.03.027 ↗
36. All-solid-state lithium–sulfur batteries based on a newly designed Li7P2.9Mn0.1S10.7I0.3 superionic conductor10.1039/C7TA01147D ↗
37. All-in-one improvement toward Li6PS5Br-based solid electrolytes triggered by compositional tune10.1016/j.jpowsour.2018.11.016 ↗
38. A lithium argyrodite Li6PS5Cl0.5Br0.5 electrolyte with improved bulk and interfacial conductivity10.1016/j.jpowsour.2018.11.029 ↗
39. Phase stability, electrochemical stability and ionic conductivity of the Li10±1MP2X12 (M = Ge, Si, Sn, Al or P, and X = O, S or Se) family of superionic conductors10.1039/C2EE23355J ↗
40. Li10Si0.3Sn0.7P2S12—a low-cost and low-grain-boundary resistance lithium super ionic conductor10.1016/j.jpowsour.2016.08.115 ↗
41. Mechanochemical synthesis of Li-argyrodite Li6PS5X (X = Cl, Br, I) as sulfur-based solid electrolytes for all solid state batteries application10.1016/j.ssi.2012.06.008 ↗
42. Liquid-phase synthesis of Li6PS5Br using ultrasonication and application to cathode composite electrodes in all-solid-state batteries10.1016/j.ceramint.2017.09.241 ↗
43. Fast lithium ion conduction in garnet type Li7La3Zr2O1210.1002/anie.200701144 ↗
44. Optimizing Li+ conductivity in a garnet framework10.1039/c2jm31413d ↗
45. A stable thin-film lithium electrolyte: lithium phosphorus oxynitride10.1149/1.1837443 ↗
46. Preparation and chemical compatibility of lithium aluminum germanium phosphate solid electrolyte10.1016/j.ssi.2017.10.016 ↗
47. Thermal and ionic conductivity studies of lithium aluminum germanium phosphate solid-state electrolyte10.1016/j.ssi.2016.03.007 ↗
48. High ionic conductivity in lithium lanthanum titanate10.1016/0038-1098(93)90841-A ↗
49. Effect of composition on lithium-ion conductivity for perovskite-type lithium strontium tantalum zirconium oxide solid electrolytes10.1016/j.ceramint.2015.12.133 ↗
50. Interface stability in solid state batteries10.1021/acs.chemmater.5b04082 ↗
51. High lithium ion conductive Li7La3Zr2O12 by inclusion of both Al and Si10.1016/j.elecom.2011.02.035 ↗
52. Effect of substitution (Ta, Al, Ga) on the conductivity of Li7La3Zr2O1210.1016/j.jpowsour.2012.01.131 ↗
53. Structure and ionic conductivity of Li7La3Zr2−xGexO12 garnet-like solid electrolyte for all solid state lithium ion batteries10.1016/j.ceramint.2018.01.065 ↗
54. Improving the Li-ion conductivity and air stability of cubic Li7La3Zr2O12 by the co-doping of Nb, Y on the Zr site10.1016/j.jeurceramsoc.2017.12.002 ↗
55. Estimation of the concentration and mobility of mobile Li+ in the cubic garnet-type Li7La3Zr2O1210.1039/C4RA15972A ↗
56. Toward understanding of ion dynamics in highly conductive lithium ion conductors: some perspectives by solid state NMR techniques10.1016/j.ssi.2017.11.025 ↗
57. Dual substitution strategy to enhance Li+ ionic conductivity in Li7La3Zr2O12 solid electrolyte10.1021/acs.chemmater.6b05369 ↗
58. Low temperature synthesis and ion conductivity of Li7La3Zr2O12 garnets for solid state Li ion batteries10.1016/j.ssi.2017.08.016 ↗
59. A rechargeable lithium-air battery using a lithium ionconducting lanthanum lithium titanate ceramics as an electrolyte separator10.1016/j.jpowsour.2012.11.098 ↗
60. Stable lithium-ion conducting perovskite lithium– strontium– tantalum–zirconium–oxide system10.1016/j.ssi.2004.01.008 ↗
61. Influence of sputtering conditions on ionic conductivity of LiPON thin films10.1016/j.ssi.2005.10.021 ↗
62. Improved performance of all-solid-state lithium batteries using LiPON electrolyte prepared with Li-rich sputtering target10.1016/j.ssi.2018.07.011 ↗
63. Stable LATP/LAGP double-layer solid electrolyte prepared via a simple dry-pressing method for solid state lithium ion batteries10.1039/C6RA19415J ↗
64. Lithium mobility in titanium based Nasicon Li1+xTi2−xAlx(PO4)3 and LiTi2−xZrx(PO4)3 materials followed by NMR and impedance spectroscopy10.1016/j.jeurceramsoc.2007.02.118 ↗
65. Cation miscibility and lithium mobility in NASICON Li1+xTi2–xScx(PO4)3 (0 ≤ x ≤ 0.5) series: a combined NMR and impedance study10.1021/acs.inorgchem.6b02274 ↗
66. Polymer electrolytes for lithium polymer batteries10.1039/C6TA02621D ↗
67. Carbonate-linked poly(ethylene oxide) polymer electrolytes towards high performance solid state lithium batteries10.1016/j.electacta.2016.12.113 ↗
68. Cross-linked solid polymer electrolyte for all-solid-state rechargeable lithium batteries10.1016/j.electacta.2016.10.122 ↗
69. Solid electrolyte based on waterborne polyurethane and poly(ethylene oxide) blend polymer for all-solid-state lithium ion batteries10.1016/j.ssi.2018.02.030 ↗
70. Charge carrier relaxation in different plasticized PEO/PVDF-HFP blend solid polymer electrolytes10.1021/acs.jpcb.7b02277 ↗
71. Covalent silica-PEO-LiTFSI hybrid solid electrolytes via sol-gel for Li-ion battery applications10.1016/j.electacta.2016.07.146 ↗
72. Preparation and performance of a composite polyimide/poly(vinylidene fluoride-co-hexafluoropropylene)/nano-Al2O3 polymer electrolyte for lithium-sulfur cell10.1007/s11581-014-1360-4 ↗
73. Structure and mobility of PEO/LiClO4 solid polymer electrolytes filled with Al2O3 nanoparticles10.1021/jp906608p ↗
74. Solid polymer electrolytes with sulfur based ionic liquid for lithium batteries10.1016/j.jpowsour.2011.07.081 ↗
75. Flexible and ion-conducting membrane electrolytes for solid-state lithium batteries: dispersion of garnet nanoparticles in insulating polyethylene oxide10.1016/j.nanoen.2016.09.002 ↗
76. Effect of additives in PEO/PAA/PMAA composite solid polymer electrolytes on the ionic conductivity and Li ion battery performance10.1007/s10800-009-9843-0 ↗
77. Polycarbonate-based polyurethane as a polymer electrolyte matrix for all solid-state lithium batteries10.1016/j.jpowsour.2018.04.020 ↗
78. Amorphous modified silyl-terminated 3D polymer electrolyte for high performance lithium metal battery10.1016/j.nanoen.2017.10.021 ↗
79. Ambient temperature solid-state Li-battery based on high-salt-concentrated solid polymeric electrolyte10.1016/j.jpowsour.2018.05.050 ↗
80. Jeffamine® based polymers as highly conductive polymer electrolytes and cathode binder materials for battery application10.1016/j.jpowsour.2017.02.047 ↗
81. Lowering the operational temperature of all-solid-state lithium polymer cell with highly conductive and interfacially robust solid polymer electrolytes10.1016/j.jpowsour.2018.02.066 ↗
82. Lithium (fluorosulfonyl)(pentafluoroethylsulfonyl)imide/poly (ethylene oxide) polymer electrolyte: physical and electrochemical properties10.1016/j.ssi.2019.05.015 ↗
83. Lithium garnet based free-standing solid polymer composite membrane for rechargeable lithium battery10.1007/s10008-018-4010-3 ↗
84. PEO/garnet composite electrolytes for solid-state lithium batteries:from ‘ceramic-in-polymer’ to ‘polymer-in-ceramic’10.1016/j.nanoen.2017.12.037 ↗
85. Lithium salt-rich PEO/Li0.3La0.557TiO3 interpenetrating composite electrolyte with three dimensional ceramic nano-backbone for all-solid-state lithium-ion batteries10.1021/acsami.8b06658 ↗
86. Synergistic coupling between Li6.75La3Zr1.75Ta0.25O12 and poly(vinylidene fuoride) induces high ionic conductivity, mechanical strength and thermal stability of solid composite electrolytes10.1021/jacs.7b06364 ↗
87. Ionic conductivity enhancement of polymer electrolytes with ceramic nanowire fillers10.1021/acs.nanolett.5b00600 ↗
88. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
89. Electrochemical in situ investigations of SEI and dendrite formation on the lithium metal anode10.1039/C4CP05865H ↗
90. First principles study on electrochemical and chemical stability of solid electrolyte electrode interfaces in all-solid-state Li-ion batteries10.1039/C5TA08574H ↗
91. Assessment of all-solid-state lithium-ion batteries10.1016/j.jpowsour.2018.04.111 ↗
92. Interfacial stability of Li metal-solid electrolyte elucidated via in situ electron microscopy10.1021/acs.nanolett.6b03223 ↗
93. XPS and SEM analysis between Li/Li3PS4 interface with Au thin film for all solid-state lithium batteries10.1016/j.ssi.2018.04.011 ↗
94. A flexible solid electrolyte interphase layer for long-life lithium metal anodes10.1002/anie.201710806 ↗
95. Unravelling Li-ion transport from picoseconds to seconds: bulk versus interfaces in an Argyrodite Li6PS5Cl–Li2S all-solid-state Li-ion battery10.1021/jacs.6b05066 ↗
96. Accessing the bottleneck in all-solid state batteries, lithium-ion transport over the solid-electrolyte electrode interface10.1038/s41467-017-01187-y ↗
97. Interfacial behaviours between lithium ion conductors and electrode materials in various battery systems10.1039/C6TA05439K ↗
98. Interfacial phenomena in solid-state lithium battery with sulfide solid electrolyte10.1016/j.ssi.2012.01.009 ↗
99. Interfacial observation between LiCoO2 electrode and Li2S−P2S5 solid electrolytes of all-solid-state lithium secondary batteries using transmission electron microscopy10.1021/cm901819c ↗
100. Interphase formation on lithium solid electrolytes-an in situ approach to study interfacial reactions by photoelectron spectroscopy10.1016/j.ssi.2015.06.001 ↗