Rapid Charging of Lithium-Ion Batteries Using Pulsed Currents

Lithium-ion batteries are typically charged using constant current that is applied until the cell voltage reaches about , at which time, charging continues at a constant voltage until the full battery capacity is attained. This process is slow, typically requiring . Empirically selected pulse-charging sequences have been shown to provide enhanced charging; however, no model exists to explain and optimize the pulse-charging protocols. Modeling the lithium diffusion into a homogeneous intercalant layer indicates that the lithium concentration reaches saturation at the graphite∕electrolyte interface after about under conventional constant current charging, mandating the shift to the lower rate constant voltage charging. It is shown here that charging the lithium battery using non-dc waveforms with properly selected parameters may circumvent this lithium saturation, enabling charging at significantly higher rates. A nonlinearly decreasing current density profile which conforms to the mass transfer coefficient variation was shown to provide complete charging in less than of an hour, faster than any other pulse-charging profile studied.