Reversible Oxygen Participation to the Redox Processes Revealed for Li_1.20Mn_0.54Co_0.13Ni_0.13O₂

Materials prepared by chemical Li deintercalation with NO 2 BF 4 from Li 1.20 Mn 0.54 Co 0.13 Ni 0.13 O 2 and chemical Li reinsertion with LiI show very similar chemical composition, oxidation state of each transition metal ion, structural properties and electrochemical performance to those of the material recovered after the 1 st electrochemical cycle. Investigations combining redox titration, magnetic measurement, neutron diffraction and chemical analyzes reveal that uncommon redox processes are involved during the first charge at high voltage and explain the charge overcapacity and large reversible discharge capacity obtained for this material. This further assesses our proposal that oxygen, in addition to nickel and cobalt, participates to the redox processes in charge: within the bulk oxygen is oxidized without oxygen loss, whereas at the surface oxygen is oxidized to O 2 and irreversibly lost from the structure. During the subsequent discharge, in addition to nickel, cobalt and oxygen, manganese is also slightly involved in the redox processes (reduction) to compensate for the initial surface oxygen loss.