Operating Proton Exchange Membrane Fuel Cells Without External Humidification of the Reactant Gases: Fundamental Aspects

Operation of proton exchange membrane fuel cells (PEMFC) without external humidification of the reactant gases is advantageous for the PEMFC system, because it eliminates the need of a gas‐humidification subsystem. The gas‐humidification subsystem is a burden in the fuel cell system with respect to weight, complexity, cost, and parasitic power. A model for the operation of PEMFC with internal humidification of the gases is presented and the range of operating conditions for a PEMFC using dry /air was investigated. The model predicts that dry air, entering at the cathode, can be fully internally humidified by the water produced by the electrochemical reaction at temperatures up to 70°C. This model was experimentally verified for cell temperatures up to 60°C by long‐term operation of a PEMFC with dry gases for up to 1800 h. The current densities, obtained at 0.6 V, were 20 to 40% lower than those measured when both gases were humidified. The water distribution in the cell, while operating with dry gases, was investigated by measuring the amount of product water on the anode and cathode sides. It was found that the back‐diffusion of product water to the anode is the dominant process for water management in the cell over a wide range of operating conditions. The dominating water back‐diffusion also allows internal humidification of the hydrogen reactant and prevents drying out of the anode.