Transparent photocurable Pickering emulsion for improving printing resolution of porous silica components
Source abstract
Abstract
An interparticle photo-crosslinkablePickering emulsion with a high transparency was prepared to improve the printing resolution of porous silica components when using the digital light processing (DLP) approach.A transparent photocurable Pickering emulsion was obtained by vigorously mixing a mixture of isopropyl myristate (IPM) and turpentine oil into a dimethyl sulfoxide aqueous suspension of silica particles in which small amounts of diacrylate monomers and photo-radical initiator were pre-dissolved.Pickering emulsions with a high linear transmittance were prepared by adjusting the refractive indices of the continuous and dispersed phases to be close to that of silica particles by adjusting the solvent mixing ratio.The effects of the in-line transmittance of the Pickering emulsions on the curing depth and overcuring behavior of the photocured bodies were evaluated.The improved in-line transmittance was found to help suppress light scattering during the photocuring process, resulting in a higher printing resolution compared with the use of opaque Pickering emulsions.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Pickering emulsions and particle stabilization · Advanced Materials and Mechanics · Modular Robots and Swarm Intelligence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Graduate School of Environment and Information Sciences, Yokohama National University
Faculty of Environment and Information Sciences, Yokohama National University
References (27)
Show source-provided references
1. 1) M. Takahashi, R. L. Menchavez, M. Fuji and H. Takegami, J. Eur. Ceram. Soc. 29, 823 (2009).10.1016/j.jeurceramsoc.2008.07.030 ↗
2. 2) I. Sopyan, M. Mel, S. Ramesh and K. A. Khalid, Sci. Technol. Adv. Mat. 8, 116 (2007).10.1016/j.stam.2006.11.017 ↗
3. 3) C. Huo, X. Tian, Y. Nan and D. Li, J. Eur. Ceram. Soc. 40, 4253 (2020).10.1016/j.jeurceramsoc.2020.03.059 ↗
4. 4) Y. Pan, P. Zhu, R. Wang, Z. Si, B. Li and Y. Yao, Ceram. Int. 45, 15230 (2019).10.1016/j.ceramint.2019.05.011 ↗
5. 5) Q. Liu and W. Zhai, ACS Appl. Mater. Inter. 14, 32196 (2022).10.1021/acsami.2c03245 ↗
6. 6) Y.-R. Wu, J.-H. He, L.-J. Cheng, J.-M. Wu and Y.-S. Shi, Ceram. Int. 48, 29900 (2022).10.1016/j.ceramint.2022.06.255 ↗
7. 7) J.-M. Wu, S.-S. Liu, M.-Y. Liu, Y. Chen, A.-N. Chen, M. Li, R.-Z. Liu, Y.-S. Shi and C.-H. Li, Ceram. Int. 44, 19678 (2018).10.1016/j.ceramint.2018.07.220 ↗
8. 8) M. Kwon, J.-H. Choi, J.-H. Kim, J.-H. Choi, U.-S. Kim, K.-T. Hwang, Y.-M. Kang and K.-S. Han, Addit. Manuf. 70, 103564 (2023).10.1016/j.addma.2023.103564 ↗
9. 9) W. Zhao, W. Liu, J. Wu, Q. Wei and C. Ye, Ceram. Int. 49, 39760 (2023).10.1016/j.ceramint.2023.06.039 ↗
10. 10) F. Baino, F. Gaido, R. Gabrieli, A. Alidoost, A. Schiavi, M. Mohammadi, M. Schwentenwein, D. Tulyaganov and E. Verné, Open Ceram. 20, 100690 (2024).10.1016/j.oceram.2024.100690 ↗
11. 11) G. Qi, Y. Zeng and J. Chen, Ceram. Int. 48, 14568 (2022).10.1016/j.ceramint.2022.01.350 ↗
12. 12) Y. Liu, Y. Liu, Y. Cao, X. Zheng, X. Sun and Y. Xu, J. Am. Ceram. Soc. 108, e20432 (2025).10.1111/jace.20432 ↗
13. 13) G. Zhang, B. Zou, X. Wang, Y. Yu and Q. Chen, Ceram. Int. 49, 1009 (2023).10.1016/j.ceramint.2022.09.076 ↗
14. 14) L. Zhao, Z. Jiang, S. Ma, C. Zhang and W. Guo, Ceram. Int. 48, 23983 (2022).10.1016/j.ceramint.2022.05.073 ↗
15. 15) Q. Chen, B. Zou, X. Wang, X. Zhou, G. Yang, Q. Lai and Y. Zhao, J. Mech. Behav. Biomed. 155, 106553 (2024).10.1016/j.jmbbm.2024.106553 ↗
16. 16) Y. Yamanoi, J. Tatami and M. Iijima, Adv. Powder Technol. 33, 103638 (2022).10.1016/j.apt.2022.103638 ↗
17. 17) N. Kleger, C. Minas, P. Bosshard, I. Mattich, K. Masania and A. R. Studart, Sci. Rep. 11, 22316 (2021).10.1038/s41598-021-01720-6 ↗
18. 18) Y. Yamanoi, J. Tatami and M. Iijima, Adv. Powder Technol. 34, 104240 (2023).10.1016/j.apt.2023.104240 ↗
19. 19) S. Tsutaki, Y. Yamanoi, J. Tatami and M. Iijima, Adv. Powder Technol. 35, 104410 (2024).10.1016/j.apt.2024.104410 ↗
20. 20) A. Ali, S. Ansari and A. K. Nain, J. Mol. Liq. 178, 178 (2013).10.1016/j.molliq.2012.12.002 ↗
21. 21) K. Kaneko, Y. Yoshimura and A. Shimizu, J. Mol. Liq. 250, 283 (2018).10.1016/j.molliq.2017.12.009 ↗
22. 22) K. Aramaki, K. Masuda, R. Horie and C. Rodríguez-Abreu, Colloid. Surface. A 533, 302 (2017).10.1016/j.colsurfa.2017.08.035 ↗
23. 23) X. Lio, B. Qin, X. Chen, X. Li, J. Liang, X. Wei and L. Wang, Ind. Crop. Prod. 222, 120075 (2024).10.1016/j.indcrop.2024.120075 ↗
24. 24) I. H. Malitson, J. Opt. Soc. Am. 55, 1205 (1965).10.1364/JOSA.55.001205 ↗
25. 25) S. Kitamura, M. Iijima, J. Tatami, T. Fuke, T. Hinotsu and K. Sato, ACS Appl. Mater. Inter. 13, 13705 (2021).10.1021/acsami.1c00629 ↗
26. 26) P. F. Jacobs, “Rapid Prototyping & Manufacturing: Fundamentals of Stereolithography”, Society of Manufacturing Engineers (1992).
27. 27) S. P. Gentry and J. W. Halloran, J. Eur. Ceram. Soc. 33, 1981 (2013).10.1016/j.jeurceramsoc.2013.02.033 ↗