Improved wave-transparent performances and enhanced mechanical properties for fluoride-containing PBO precursor modified cyanate ester resins and their PBO fibers/cyanate ester composites
Source abstract
Abstract
Abstract Poly(p-phenylene-2,6-benzobisoxazole) (PBO) fibers can be applied as reinforcement to fabricate PBO/cyanate ester (CE) resin laminated composites with light weight, high specific strength & modulus, excellent dielectric properties, and extraordinary excellent thermal & humidity resistance for radome application. However, the surface of PBO fibers is extremely inert, resulting in poor interfacial compatibility to CE matrix. Besides, the toughness and wave-transparent performances of the cured CE resins need to be further improved. In this work, 2, 2-bis(3-amino-4-hydroxyphenyl) hexafluoropropane (6FAP) and terephthaloyl chloride (TPC) were performed to synthesize fluorine-containing epoxy-terminated PBO precursor (epoxy-preFPBO) via condensation reaction followed by end-group functionalization with glycidol. Afterwards, epoxy-preFPBO modified CE resins (FPBO-co-BADCy resins) were prepared by copolymerization of epoxy-preFPBO and bisphenol A cyanate ester (BADCy). FPBO-co-BADCy resins with 7 wt% epoxy-preFPBO displayed the optimal wave-transparent performances and mechanical properties. Dielectric constant (e) and dielectric loss (tanδ) is respectively 2.48 and 0.0081, and the corresponding transmittance (|T|2) at 10 MHz is 94.9%, higher than that of pure BADCy (92.7%). The corresponding flexural and impact strength was enhanced to 119.9 MPa and 12.3 kJ/m2, 21.4% and 24.5% higher than that of pure BADCy, respectively. In addition, FPBO-co-BADCy resins presented better interfacial bonding strength with PBO fibers than that of pure BADCy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Synthesis and properties of polymers · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Interfacial shear strength of a glass fiber/epoxy bonding in composites modified with carbon nanotubes10.1016/j.compscitech.2010.04.010 ↗
2. Friction and wear of MoO3/graphene oxide modified glass fiber reinforced epoxy nanocomposites10.1002/mame.201970018 ↗
3. Concurrent photocatalytic and filtration processes using doped TiO2 coated quartz fiber membranes in a photocatalytic membrane reactor10.1016/j.cej.2017.07.141 ↗
4. Preparation and properties of cyanate-based wave-transparent laminated composites reinforced by dopamine/POSS functionalized Kevlar cloth10.1016/j.compscitech.2018.11.018 ↗
5. Synthesis of a novel cross-linker with high reactivity for enhancing compressive strength of high-performance organic fibers
6. Light triggered interfacial damage self-healing of poly(p-phenylene benzobisoxazole) fiber composites10.1088/1361-6528/aab010 ↗
7. Mussel-inspired immobilization of BN nanosheets onto poly(p-phenylene benzobisoxazole) fibers: multifunctional interface for photothermal self-healing10.1016/j.apsusc.2018.01.307 ↗
8. Controllable organic magnetoresistance in polyaniline coated poly(p-phenylene-2,6-benzobisoxazole) short fibers10.1039/C9CC04789A ↗
9. Construction of anti-ultraviolet “shielding clothes” on poly(p-phenylene benzobisoxazole) fibers: metal organic framework-mediated absorption strategy10.1021/acsami.8b16845 ↗
10. Surface modification of PBO fibers by direct fluorination and corresponding chemical reaction mechanism10.1016/j.compscitech.2018.06.014 ↗
11. Basalt fiber modified with lanthanum-ethylenediaminetetraacetic acid as potential reinforcement of cyanate matrix composites10.1016/j.apsusc.2018.09.129 ↗
12. Enhanced interfacial properties of PBO fiber via electroless nickel plating10.1016/j.surfcoat.2013.08.045 ↗
13. Atomic oxygen erosion behaviors of PBO fibers and their composite: microstructure, surface chemistry and physical properties10.1016/j.polymdegradstab.2016.09.013 ↗
14. Wettability assessment of plasma-treated PBO fibers based on thermogravimetric analysis10.1016/j.ijadhadh.2017.01.010 ↗
15. Effects of argon plasma treatment on the interfacial adhesion of PBO fiber/bismaleimide composite and aging behaviors10.1016/j.apsusc.2011.07.029 ↗
16. Surface analysis of γ-ray irradiation modified PBO fiber10.1016/j.matchemphys.2005.01.025 ↗
17. Advanced aromatic polymers with excellent antiatomic oxygen performance derived from molecular precursor strategy and copolymerization of polyhedral oligomeric silsesquioxane10.1021/acsami.5b05490 ↗
18. Synchronously improved dielectric and mechanical properties of wave-transparent laminated composites combined with outstanding thermal stability by incorporating iysozyme/POSS functionalized PBO fibers10.1039/C8TC02391C ↗
19. Flexible conductive copper/reduced graphene oxide coated PBO fibers modified with poly(dopamine)10.1016/j.jallcom.2019.02.296 ↗
20. Molecular engineering of the cellulose-poly(caprolactone) bio-nanocomposite interface by reactive amphiphilic copolymer nanoparticles10.1021/acsnano.8b08257 ↗
21. Short jute fiber reinforced polypropylene composites: effect of compatibiliser, impact modifier and fiber loading10.1016/S0266-3538(02)00267-1 ↗
22. An effective compatibilizer for tin fluorophosphate glass/polymer composites obtained from “one pot” KF-RAFT polymerization10.1016/j.compscitech.2018.10.018 ↗
23. The use of polyethylene copolymers as compatibilizers in carbon fiber reinforced high density polyethylene composites10.1016/j.compositesb.2016.06.043 ↗
24. Development of wave-transparent, light-weight composites combined with superior dielectric performance and desirable thermal stabilities10.1016/j.compscitech.2017.03.027 ↗
25. A new type of unsaturated polyester resin with low dielectric constant and high thermostability: preparation and properties10.1039/c2ra20617j ↗
26. Studies of dielectric relaxation in natural fibres reinforced unsaturated polyester10.1007/s10853-010-5136-6 ↗
27. Synergistically toughening polyoxymethylene by methyl methacrylate–butadiene–styrene copolymer and thermoplastic polyurethane10.1002/macp.201800567 ↗
28. Aramid/epoxy composites sandwich structures for low-observable radomes10.1016/j.compscitech.2011.07.008 ↗
29. Layer-by-layer grafting CNTs onto carbon fibers surface for enhancing the interfacial properties of epoxy resin composites10.1016/j.compscitech.2017.11.002 ↗
30. Development and mechanism of ultralow dielectric loss and toughened bismaleimide resins with high heat and moisture resistance based on unique amino-functionalized metal-organic frameworks10.1016/j.compositesb.2017.07.087 ↗
31. Improving the mechanical, thermal, dielectric and flame retardancy properties of cyanate ester with the encapsulated epoxy resin-penetrated aligned carbon nanotube bundle10.1016/j.compositesb.2017.05.029 ↗
32. Preparation of phosphorus-containing cyanate resin with low curing temperature while excellent flame resistance and dielectric properties10.1080/10601325.2019.1591161 ↗
33. Flame-retardant cyanate ester resin with suppressed toxic volatiles based on environmentally friendly halloysite nanotube/graphene oxide hybrid10.1002/app.46587 ↗
34. High-performance cyanate ester composites with plasma-synthesized MgSiO3-SiO2-hBN powders for thermally conductive and dielectric properties10.1016/j.ceramint.2018.12.138 ↗
35. High-k 3D-barium titanate foam/phenolphthalein poly(ether sulfone)/cyanate ester composites with frequency-stable dielectric properties and extremely low dielectric loss under reduced concentration of ceramics10.1016/j.apsusc.2017.08.119 ↗
36. Preparation of phosphorus-containing cyanate resin with low curing temperature while excellent flame resistance and dielectric properties10.1080/10601325.2019.1591161 ↗
37. Decreasing the dielectric constant and water uptake by introducing hydrophobic cross-linked networks into co-polyimide films10.1016/j.apsusc.2019.02.141 ↗
38. Synthesis and properties of novel fluorinated epoxy resins based on 1,1-bis(4-glycidylesterphenyl)-1-(3′-trifluoromethylphenyl)-2,2,2-trifluoroethane10.1016/j.eurpolymj.2006.10.030 ↗
39. Post-functionalization of novolac resins by introducing thermo-crosslinkable –OCF=CF2 groups as the side chains: a new strategy for production of thermosetting polymers without releasing volatiles10.1039/C6PY00788K ↗
40. Fluorinated poly(arylene ether ketone)s for high temperature dielectrics10.1016/j.polymer.2015.12.006 ↗
41. Postpolymerization of a fluorinated and reactive poly(aryl ether): an efficient way to balance the solubility and solvent resistance of the polymer10.1021/am506019s ↗
42. Synthesis and properties of trifluoromethyl groups containing epoxy resins cured with amine for low Dk materials10.1002/app.35300 ↗
43. Ultralow dielectric, fluoride-containing cyanate ester resins with improved mechanical properties and high thermal and dimensional stabilities10.1039/C7TC00222J ↗
44. A smart latent catalyst containing o-trifluoroacetamide functional benzoxazine: precursor for low temperature formation of very high performance polybenzoxazole with low dielectric constant and high thermal stability10.1021/acs.macromol.7b00887 ↗
45. Fabrication on the annealed Ti3C2Tx MXene/Epoxy nanocomposites for electromagnetic interference shielding application10.1016/j.compositesb.2019.04.050 ↗
46. Liquid crystalline epoxy resin modified cyanate ester for high performance electronic packaging10.1007/s10965-010-9549-3 ↗
47. Dielectric thermally conductive boron nitride/polyimide composites with outstanding thermal stabilities via in-situ polymerization-electrospinning-hot press method10.1016/j.compositesa.2016.12.014 ↗