Multi-walled carbon nanotube and carbon nanofiber/ polyacrylonitrile aerogel scaffolds for enhanced epoxy resins
Source abstract
Abstract
Abstract Despite the unique characteristics of carbon nanostructures such as carbon nanotube (CNTs) and carbon nanofibers (CNFs), their practical applications are limited because of their extremely low solubility and poor dispersion characteristics. To obtain composites with favorable electrical, thermal and mechanical properties, a network of nanofiller/polyacrylonitrile (PAN) aerogel was prepared by non-solvent and thermally induced phase separation (NIPS/TIPS) method and used as a scaffold to create epoxy nanocomposite. Compared with the conventional mixing, this method brought about a considerable increase of compressive strength (about 500%). Furthermore, an electrical percolation threshold as low as 0.0028 and 0.019 vol % was observed for CNT/polyacrylonitrile/epoxy nanocomposites (CNT/PA/E) and CNF/polyacrylonitrile/epoxy nanocomposites (CNF/PA/E), respectively. To the best of our knowledge, this small amount of percolation threshold has not yet been reported for CNT and CNF based nanocomposites. Such intriguing performance can mainly be related to a three-dimensional nanotube and nanofiber network structure in the resin matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Dielectric materials and actuators · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. High performance epoxy nanocomposite adhesive: effect of nanofillers on adhesive strength, curing and degradation kinetics10.1016/j.ijadhadh.2018.03.013 ↗
2. Controllability of epoxy equivalent weight and performance of hyperbranched epoxy resins10.1016/j.compositesb.2018.12.103 ↗
3. A review of extending performance of epoxy resins using carbon nanomaterials
4. New class of carbon-nanotube aerogel electrodes for electrochemical power sources10.1002/adma.200701498 ↗
5. Su · 2015 · vol. 79 · 505
6. Synergistic improvement of epoxy composites with multi-walled carbon nanotubes and hyperbranched polymers
7. Ultralight multiwalled carbon nanotube aerogel10.1021/nn102246a ↗
8. Use of X-ray microtomography to study the homogeneity of carbon nanotube aqueous suspensions and carbon nanotube/polymer composites10.1016/j.carbon.2011.11.031 ↗
9. Performance study of ultrasonic assisted processing of
10. Kim · 2012 · vol. 43 · 2298
11. Carbon nanotube sponges, aerogels, and hierarchical composites: synthesis, properties, and energy applications10.1002/aenm.201600554 ↗
12. Highly stable carbon nanotube/polyaniline porous network for multifunctional applications10.1021/acsami.6b11984 ↗
13. Carbon nanotube aerogels10.1002/adma.200601748 ↗
14. Recyclable and superelastic aerogels based on carbon nanotubes and carboxymethyl cellulose10.1016/j.compscitech.2018.01.002 ↗
15. Carbon scaffolds for stiff and highly conductive monolithic oxide-carbon nanotube composites10.1021/cm200426k ↗
16. Gui · 2011 · 4276
17. Hu · 2014
18. Graphene aerogel/epoxy composites with exceptional anisotropic structure and properties10.1021/acsami.5b00146 ↗
19. Morphology and electrical properties of multi-walled carbon nanotube/carbon aerogel prepared by using polyacrylonitrile as precursor10.1039/C5RA07984E ↗
20. Effect of carbon nanotube loading on mechanical and thermal properties of pure and pyrolyzed10.1166/jnn.2017.13068 ↗
21. Handbook of friction materials and their applications
22. Conductivity and structural studies of plasticized polyacrylonitrile (PAN)-lithium triflate polymer electrolyte films
23. Effects of carbon nanotube alignment on electrical and mechanical properties of epoxy nanocomposites10.1016/j.compositesa.2013.01.015 ↗
24. Characterization of multi-walled carbon nanotube dispersion in resorcinol-formaldehyde aerogels10.1016/j.micromeso.2013.10.002 ↗
25. Correlation between morphology and electrical conductivity of dried and carbonized multi-walled carbon nanotube/resorcinol???formaldehyde xerogel composites10.1007/s10853-015-9148-0 ↗
26. A review and analysis of electrical percolation in carbon nanotube polymer composites10.1016/j.compscitech.2008.06.018 ↗
27. EMI shielding effectiveness of carbon based nanostructured polymeric materials: a comparative study10.1016/j.carbon.2013.04.008 ↗
28. Preparation of stable carbon nanotube aerogels with high electrical conductivity and porosity10.1016/j.carbon.2011.02.001 ↗
29. Carbon nanomaterial–reinforced epoxy composites: a review10.1080/03602559.2017.1298802 ↗
30. Modeling and mechanical performance of carbon nanotube/epoxy resin composites10.1016/j.matdes.2012.02.039 ↗
31. A micro-mechanical model for elastic modulus of multi-walled carbon nanotube/epoxy resin composites
32. Micromechanics modeling for the stiffness and strength properties of glass fibers/CNTs/epoxy composites10.2495/HPSM100261 ↗
33. Properties of single-walled carbon nanotube-based aerogels as a function of nanotube loading10.1016/j.actamat.2009.07.012 ↗
34. Ultralow-carbon nanotube-toughened epoxy: the critical role of a double-layer interface10.1021/acsami.7b14767 ↗
35. Oh · 2015
36. Nanoparticle networks reduce the flammability of polymer nanocomposites10.1038/nmat1502 ↗
37. Mateusz · 2007
38. Effect of thermal interface on heat flow in carbon nanofiber composites10.1021/am4046102 ↗
39. Very low conductivity threshold in bulk isotropic single-walled carbon nanotube-epoxy composites10.1002/adma.200401649 ↗
40. Correlations between percolation threshold, dispersion state, and aspect ratio of carbon nanotubes10.1002/adfm.200700065 ↗
41. Glass transition temperature depression at the percolation threshold in carbon nanotube-epoxy resin and polypyrrole-epoxy resin composites10.1002/marc.200400515 ↗
42. The electronic transport properties and microstructure of carbon nanofiber/epoxy composites10.1016/j.compscitech.2007.06.028 ↗
43. Ultralow percolation threshold in aerogel and cryogel templated composites10.1021/la4017307 ↗
44. Electromagnetic interference ( EMI ) shielding of single-walled carbon nanotube epoxy composites10.1021/nl0602589 ↗