Effect of the nano-filler content on the compressive strength of continuous carbon fibre/epoxy matrix composites
Source abstract
Abstract
Abstract The axial compressive strength of continuous fibres reinforced composite laminates is a key design parameter. Adding nano-fillers to polymer matrices should increase this property but compressive failure modes may change with increasing the nano-filler content. Significant improvement of the compressive strength is observed with increasing nano-filler content. It is also shown that a single experimental tensile test on ± 4 5 ∘ coupons makes it possible to estimate the compressive strength regardless of the nano-filler content. Indeed, the results of such a test include, on the one hand, a shear failure strain that indicates the type of failure mode in compression, and, on the other hand, a non-linear shear behaviour that is used in a corresponding fibre micro-buckling model.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fiber-reinforced polymer composites · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. The effect of fibre waviness on the relationship between compressive and flexural strengths of unidirectional composites10.1177/002199839402800105 ↗
2. Compressive failure of fibre composites10.1016/0022-5096(93)90068-Q ↗
3. Effect of networked hybridized nanoparticle reinforcement on the thermal conductivity and mechanical properties of natural rubber composites10.1039/C8RA08543A ↗
4. The effect of SiO2 nano-filler on dielectric properties of epoxy resin10.1051/epjap/2019180221 ↗
5. Understanding the effect of nano-modifier addition upon the properties of fibre reinforced laminates10.1016/j.compscitech.2007.09.005 ↗
6. Strength of unidirectional glass/epoxy composite with silica nanoparticle-enhanced matrix10.1016/j.compscitech.2008.02.026 ↗
7. Investigating silica nanoparticle effect on dynamic and quasi-static compressive strengths of glass fiber/epoxy nanocomposites10.1177/0021998309345317 ↗
8. Jumahat · 2011
9. Fracture mechanisms and failure analysis of carbon fibre/toughened epoxy composites subjected to compressive loading10.1016/j.compstruct.2009.08.010 ↗
10. Effect of silica nanoparticles on compressive properties of an epoxy polymer10.1007/s10853-010-4683-1 ↗
11. Compressive properties of nanoclay/epoxy nanocomposites10.1016/j.proeng.2012.07.357 ↗
12. Improving mechanical properties of fiber-reinforced composites based on epoxy resins containing industrial surface-modified silica nanoparticles: review and outlook10.1177/0021998313514260 ↗
13. ASTM, D695 - Standard Test Method for Compressive properties of Rigid Plastics. 1992.
14. Limitations on adding nano-fillers to increase the compressive strength of continuous fibre / epoxy matrix composites
15. On the high compressive strains achieved in bending test on unidirectional carbon-fibre/epoxy10.1016/0266-3538(92)90093-I ↗
16. A fibre direction compressive failure criterion for long fibre laminates at ply scale, including stacking sequence and laminate thickness effects10.1016/j.compstruct.2012.06.013 ↗
17. An experimental protocol to measure the parameters affecting the compressive strength of CFRP with a fibre micro-buckling failure criterion10.1016/j.compstruct.2018.12.026 ↗
18. Structure effect and microbuckling10.1016/0266-3538(96)00033-4 ↗
19. Homogenized models for the modelling of instability in long fibre media
20. Argon · 1972 · 270
21. ASTM. D790 - Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials. 2002.
22. Determination of the longitudinal non linear elastic behaviour and compressive strength of a CFRP ply by bending tests on laminates10.1016/j.compositesb.2020.107863 ↗
23. Measurement of small angle fiber misalignments in continuous fiber composites10.1016/0266-3538(87)90016-9 ↗