journal article·2024-03Open access

That’s how the preform crumples: Wrinkle creation during forming of thick binder-stabilised stacks of non-crimp fabrics

Peter H. Broberg, Esben Lindgaard, Christian Krogh, Adam J. Thompson, Jonathan P.-H. Belnoue, Stephen R. Hallett, Brian L.V. Bak

Abstract

The simultaneous forming of multiple layers of fabric is being used in industry to increase the throughput of composite parts. A polymeric binder may be used to stabilise the fabric layers to make it easier to handle, however, the binder may also restrict relative fibre movement, which may lead to wrinkles during forming. Despite the increasing interest in using binder-stabilised preforms in the wind industry, defects arising during forming have scarcely been investigated. This study investigates fibre wrinkling in binder-stabilised preforms (layers of dry non-crimp fabric stabilised with an interply polymeric binder) during forming. The results from an experimental campaign are presented, in which full-thickness pre-consolidated preform specimens are being formed over two different ramp geometries. Wrinkles are observed at the transition edges during forming. To aid the discussion on wrinkle mechanisms, a numerical model is presented that uses continuum shell elements for modelling the NCFs and a cohesive law for modelling the interface. This model is capable of predicting the wrinkle onset and wrinkle location and may be used to study the formability of the preform.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Material Properties and Processing · Textile materials and evaluations · Advanced Materials and Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Design of a fibrous composite preform for wind turbine rotor blades10.1016/j.matdes.2013.11.036 ↗
2. Hagenbeek M, Van Den Boom SJ, Werter NPM, Talagani F, Van Roermund M, Bulder BH, et al. The blade of the future: wind turbine blades in 2040. Tech. rep., 2022, www.tno.nl.
3. Towards automation of wind energy rotor blade production: a review of challenges and application examples
4. Effects of reactive and non-reactive tackifying agents on mechanical neat resin and composite performance for preforming processes and Liquid Resin Infusion (LRI) techniques
5. Strategic materials selection in the automobile body: Economic opportunities for polymer composite design10.1016/j.compscitech.2008.01.015 ↗
6. Active forming manipulation of composite reinforcements for the suppression of forming defects10.1016/j.compositesa.2017.04.011 ↗
7. Variability, fibre waviness and misalignment in the determination of the properties of composite materials and structures10.1016/j.compositesa.2008.04.016 ↗
8. Effects of defects in composite wind turbine blades – part 1: Characterization and mechanical testing10.5194/wes-2-641-2017 ↗
9. Investigation of the effect of wrinkle features on wind turbine blade sub-structure strength10.1016/j.compstruct.2019.03.026 ↗
10. Parametric study of the effect of wrinkle features on the strength of a tapered wind turbine blade sub-structure10.1016/j.compstruct.2019.02.065 ↗
11. Mechanisms of origin and classification of out-of-plane fiber waviness in composite materials—a review10.3390/jcs4030130 ↗
12. On the relationship between shear angle and wrinkling of textile composite preforms10.1016/S1359-835X(96)00150-9 ↗
13. The effect of blank holder force on the stamp forming behavior of non-crimp fabric with a chain stitch10.1016/j.compscitech.2006.09.009 ↗
14. Bending and wrinkling of composite fiber preforms and prepregs. A review and new developments in the draping simulations10.1016/j.compositesb.2017.12.061 ↗
15. Mechanisms of wrinkle formation during the processing of composite laminates10.1016/S0266-3538(98)00080-3 ↗
16. Ply-slip during the forming of thermoplastic composite parts10.1177/002199838902300604 ↗
17. Out-of-plane ply wrinkling defects during consolidation over an external radius10.1016/j.compscitech.2014.10.007 ↗
18. Micro-level mechanisms of fiber waviness and wrinkling during hot drape forming of unidirectional prepreg composites10.1016/j.compositesa.2017.10.008 ↗
19. Experimental and numerical analysis of wrinkling during forming of multi-layered textile composites10.1016/j.compstruct.2018.10.018 ↗
20. Simulation of wrinkling during bending of composite reinforcement laminates10.3390/ma13102374 ↗
21. An experimental study of mechanisms behind wrinkle development during forming of composite laminates10.1016/j.compositesa.2013.03.013 ↗
22. Vacuum-assisted resin transfer molding using tackified fiber preforms10.1002/pc.10574 ↗
23. Composites : Part a effect of inter-ply sliding on the quality of multilayer interlock dry fabric preforms10.1016/j.compositesa.2014.10.017 ↗
24. Krogh · 2021 · 457
25. Numerical forming of continuous fibre reinforced composite material: A review10.1016/j.compositesa.2018.07.010 ↗
26. Predictive model for the detection of out-of-plane defects formed during textile-composite manufacture10.1016/j.compositesa.2015.07.011 ↗
27. A viscoelastic approach for modeling bending behavior in finite element forming simulation of continuously fiber reinforced composites10.1016/j.compositesa.2016.11.027 ↗
28. Modelling defect formation in textiles during the double diaphragm forming process10.1016/j.compositesb.2020.108357 ↗
29. Decoupling the bending behavior and the membrane properties of finite shell elements for a correct description of the mechanical behavior of textiles with a laminate formulation10.1177/1528083713477442 ↗
30. Simulating the effect of fabric bending stiffness on the wrinkling behaviour of biaxial fabrics during preforming
31. Characterisation of inter-ply shear in uncured carbon fibre prepreg10.1016/j.compositesa.2015.07.008 ↗
32. Simulation of multi-layered composites forming10.1007/s12289-010-0865-2 ↗
33. A coupled thermomechanical approach for finite element forming simulation of continuously fiber-reinforced semi-crystalline thermoplastics
34. Understanding tack behaviour during prepreg-based composites’ processing
35. Consolidation-driven defect generation in thick composite parts10.1115/1.4039555 ↗
36. Numerical modelling of compaction induced defects in thick 2D textile composites10.1016/j.matdes.2020.109088 ↗
37. Consolidation-driven wrinkling in carbon/epoxy woven fabric prepregs: An experimental and numerical study
38. An experimental and computational study of laminated paperboard creasing and folding10.1016/j.ijsolstr.2009.08.012 ↗
39. Hyperelastic model for large deformation analyses of 3d interlock composite preforms10.1016/j.compscitech.2012.05.006 ↗
40. Influence of NCF architecture on the morphology of forming induced wrinkling
41. Characterisation of the transverse shear behaviour of binder-stabilised preforms for wind turbine blade manufacturing10.1016/j.compstruct.2023.117738 ↗
42. Simulation of wrinkling during forming of binder stabilized UD-NCF preforms in wind turbine blade manufacturing10.4028/p-165q46 ↗
43. Predicting fibre wrinkling in binder-stabilised preforms during wind turbine blade manufacturing
44. Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus10.1016/0266-3538(96)00005-X ↗
45. One-click bending stiffness: Robust and reliable automatic calculation of moment–curvature relation in a cantilever bending test
46. Comprehending the bending: A comparison of different test setups for measuring the out-of-plane flexural rigidity of a UD fabric10.4028/p-r883x4 ↗
47. Aspects of the compaction of composite angle laminates: an experimental investigation10.1177/002199801772661849 ↗
48. Vacuum-bagged composite laminate forming processes: Predicting thickness deviation in complex shapes