Quantitative evaluation of the effect of fibers on the fracture resistance of oil well cement based on subcritical crack growth
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Drilling and Well Engineering · Innovative concrete reinforcement materials · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Mechanical performance of oil-well cement slurries cured and tested under high-temperatures and high-pressures for deep-well applications10.1016/j.cemconres.2023.107355 ↗
2. An innovative perspective to analyze failure process of three widely utilized fiber-reinforced oil well cement pastes10.1016/j.conbuildmat.2025.141332 ↗
3. Study on the dynamic and static mechanical properties of microsphere rubber powder reinforced oil well cement composites10.1016/j.conbuildmat.2021.125145 ↗
4. Review of integrity loss detection and quantification due to cracking in cemented Wells10.2118/214303-PA ↗
5. Mechanical properties and mechanism of wollastonite fibers reinforced oil well cement10.1016/j.conbuildmat.2020.120461 ↗
6. Crack growth resistance of hybrid fiber reinforced cement composites10.1016/S0958-9465(01)00043-9 ↗
7. Hybrid effect of basalt fiber and carbon fiber on the mechanical properties and microstructure of oil well cement10.1016/j.conbuildmat.2021.122696 ↗
8. Effect of modified sepiolite and carbon fiber composite on performance of oil-well cement and mechanism analysis10.1016/j.conbuildmat.2019.117837 ↗
9. Research on the fracture mechanical performance of basalt fiber nano-CaCO3 concrete based on DIC technology10.1016/j.conbuildmat.2022.127193 ↗
10. The scratch test for strength and fracture toughness determination of oil well cements cured at high temperature and pressure10.1016/j.cemconres.2011.04.014 ↗
11. Ding · 2024
12. Fracture toughness enhancement of cement paste with multi-walled carbon nanotubes10.1016/j.conbuildmat.2014.07.077 ↗
13. Development of the strain field along the crack in ultra-high-performance fiber-reinforced concrete (UHPFRC) under bending by digital image correlation technique10.1016/j.cemconres.2019.105821 ↗
14. Tensile strength and fracture toughness of steel fiber reinforced concrete measured from small notched beams
15. Improvement of boundary effect model in multi-scale hybrid fibers reinforced cementitious composite and prediction of its structural failure behavior10.1016/j.compositesb.2021.109219 ↗
16. Experimental evaluation of fracture toughness of bamboo fiber reinforced high performance lightweight aggregate concrete10.1016/j.engstruct.2023.117028 ↗
17. Fracture behavior of cement mortar reinforced by hybrid composite fiber consisting of CaCO3 whiskers and PVA-Steel hybrid fibers10.1016/j.compositesa.2019.03.002 ↗
18. Fracture toughness of recycled carbon fibers reinforced cement mortar and its environmental impact assessment
19. Investigation into the fracture mechanical performance of strain hardening cementitious composites hybridized with polyethylene and carbon fiber using digital image correlation (DIC) technique10.1016/j.istruc.2025.109339 ↗
20. Crack extension resistance and fracture properties of quasi-brittle softening materials like concrete based on the complete process of fracture10.1023/A:1007553012684 ↗
21. Study on the fracture toughness of polypropylene–basalt fiber-reinforced concrete10.1186/s40069-021-00472-x ↗
22. Synergy assessment of hybrid reinforcements in concrete10.1016/j.compositesb.2018.04.020 ↗
23. Investigation and evaluation on early-age crack resistance of ultra-high performance seawater sea-sand concrete with non-metallic fiber10.1016/j.cemconres.2025.107906 ↗
24. Experimental and numerical study on the fracture process zone and fracture toughness determination for ISRM-suggested semi-circular bend rock specimen10.1016/j.engfracmech.2016.01.002 ↗
25. Evaluation of mode I fracture toughness assisted by the numerical determination of K-Resistance10.1007/s00603-014-0550-8 ↗
26. Fracture mechanisms of granite subjected to varied thermal treatments: insights into cooling-induced failure characteristics10.1016/j.tafmec.2025.104942 ↗
27. Influences of notch width and notch-tip angle on the fracture toughness measurement using the semi-circular bend (SCB) specimen10.1016/j.engfracmech.2023.109098 ↗
28. A new fracture toughness calculation method for cementitious materials in the three-point bending test based on the transverse force
29. Hierarchal porous graphene-structured electrocatalysts with Fe–N5 active sites modified with Fe clusters for enhanced performance toward oxygen reduction reaction10.1021/acsami.2c10947 ↗
30. Study on the developmental characteristics and mechanism of shale FPZs10.1016/j.tafmec.2023.103814 ↗
31. Fracture process zone and tensile behavior of blended binders containing limestone powder10.1016/j.cemconres.2015.03.002 ↗
32. The effect of modified basalt fiber on mechanical properties of oil well cement slurry
33. Parameter optimization and regression analysis for multi-index of hybrid fiber-reinforced recycled coarse aggregate concrete using orthogonal experimental design10.1016/j.conbuildmat.2020.121013 ↗
34. Optimization of wellbore cement sheath resilience using nano and microscale reinforcement: a statistical approach using design of experiments10.1016/j.petrol.2020.108324 ↗
35. Simulation and parameter prediction model of rheological properties of fiber reinforced concrete
36. Improvement of basalt fiber dispersion and its effect on mechanical characteristics of oil well cement
37. Mechanical properties and enhancement mechanism of oil-well cement stone reinforced with carbon fiber surfaces treated by concentrated nitric acid and sodium hypochlorite
38. Fracture process zone development and length assessment under the mixed-mode I/II load analysed by digital image correlation technique10.1016/j.cemconres.2023.107261 ↗
39. Fracture energy and fracture process zone10.1007/BF02472590 ↗
40. Experimental investigation on mode I fracture behavior of sandstone after grouting filling under three-point bending10.1016/j.engfracmech.2023.109578 ↗
41. The effect of fracture growth rate on fracture process zone development in quasi-brittle rock10.1016/j.engfracmech.2021.108086 ↗
42. Mode I fracture propagation and post-peak behavior of sandstone: insight from AE and DIC observation10.1016/j.engfracmech.2024.110093 ↗
43. Determination of mode I fracture toughness of rocks with field fitting and J-integral methods10.1016/j.tafmec.2022.103263 ↗
44. Fracture of sandstone characterized by digital image correlation10.1016/j.ijrmms.2012.12.043 ↗
45. Experimental study on fracture and fatigue crack propagation processes in concrete based on DIC technology10.1016/j.engfracmech.2020.107166 ↗
46. Visual detection of a cohesionless crack in rock under three-point bending10.1016/j.engfracmech.2019.02.009 ↗
47. Mesoscopic investigation of size effect in notched concrete beams: the role of fracture process zone10.1016/j.engfracmech.2019.03.028 ↗
48. Rheological and mechanical properties of oil-well cement reinforced by hybrid inorganic fibers10.1016/j.conbuildmat.2023.131002 ↗
49. An empirical relation between mode I fracture toughness and the tensile strength of rock10.1016/S1365-1609(02)00032-1 ↗
50. Durable cement/cellulose nanofiber composites prepared by a facile approach10.1016/j.cemconcomp.2021.104321 ↗
51. Synergistic effect of hybrid micro- and macro- fibers on the flexural properties of concrete10.1016/j.conbuildmat.2025.139901 ↗
52. Experimental evaluation on fiber distribution characteristics and mechanical properties of calcium carbonate whisker modified hybrid fibers reinforced cementitious composites10.1016/j.conbuildmat.2020.120292 ↗
53. Real-time video recognition for assessing plastic viscosity of ultra-high-performance concrete (UHPC)10.1016/j.measurement.2022.110809 ↗
54. Rheology dependent pore structure optimization of high-performance foam concrete10.1016/j.cemconres.2024.107737 ↗
55. Application of nanoindentation testing to study of the interfacial transition zone in steel fiber reinforced mortar10.1016/j.cemconres.2009.05.002 ↗
56. Aging of alkali-resistant glass and basalt fibers in alkaline solutions: evaluation of the failure stress by Weibull distribution function10.1016/j.jnoncrysol.2009.09.018 ↗
57. Chemical stability of basalt fiber in alkaline solution10.1007/s12221-014-2329-7 ↗
58. Chemical durability and performance of modified basalt fiber in concrete medium10.1016/j.conbuildmat.2017.07.153 ↗
59. Tensile behavior contrast of basalt and glass fibers after chemical treatment10.1016/j.matdes.2010.04.009 ↗
60. Effect of plasma surface modification on pullout characteristics of carbon fiber-reinforced cement composites10.1016/j.cartre.2021.100030 ↗
61. Carbon fiber reinforced cement improved by using silane-treated carbon fibers10.1016/S0008-8846(99)00015-0 ↗
62. Carbon fiber surface nano-modification and enhanced mechanical properties of fiber reinforced cementitious composites10.1016/j.conbuildmat.2023.130701 ↗
63. Mechanical properties of oil well cement stone reinforced with hybrid fiber of calcium carbonate whisker and carbon fiber10.1016/S1876-3804(15)60012-X ↗
64. The synergistic effects of different types of hybridized synthetic fibers on concrete post-crack residual strength10.1007/s12205-021-1061-2 ↗
65. Synergistic effects of fiber hybridization on the mechanical performance of seawater sea-sand concrete10.1016/j.conbuildmat.2024.135087 ↗
66. Experimental study on mechanical properties of fiber reinforced concrete: effect of cellulose fiber, polyvinyl alcohol fiber and polyolefin fiber10.1016/j.conbuildmat.2020.120610 ↗
67. Uniaxial compression mechanical property and fracture behavior of hybrid inorganic short mineral fibers reinforced cement-based material10.1016/j.cemconcomp.2019.103338 ↗