journal article·2009-04

Effect of low frequency vibrations on void content in composite materials

J. Muric-Nesic, P. Compston, N. Noble, Z.H. Stachurski

Publisher page

Abstract

Abstract Eliminating common defects such as voids, bubbles, and poor adhesion at interfaces will increase the quality of laminated sandwich composite structure. This work reports experimental research and analysis of the effect of mechanical vibrations applied to the curing system of composite materials production, particularly for minimizing void content. Range of frequency of vibrations covered was from 10 to 50 Hz, for different period of vibrations. The composite laminates were made by hand lay-up using glass fibers and vinyl-ester resin, and examined under microscope to determine types and quantity of defects. The results showed reduction in void content when vibrations were applied for 30 min.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Mechanical Behavior of Composites · Structural Analysis of Composite Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Voids and their effects on the mechanical properties of composites – an appraisal
2. Porosity in carbon fiber composites – an overview of causes
3. Effect of voids on failure mechanism in RTM laminates10.1016/0266-3538(95)00024-0 ↗
4. Critical void content for thermoset composite laminates
5. Effects of cure cycles on void content and mechanical properties of composite laminates10.1016/j.compstruct.2005.02.001 ↗
6. Santulli C, Drezet D, Brooks R, Rudd CD. Relation between void content and mechanical and impact properties in commingled E-glass/polypropylene thermoplastic composites. In: EUROMAT conference 2001.
7. Ultrasonic and interlaminar properties of highly porous composites10.1177/002199830003400303 ↗
8. Compression, flexure and shear properties of a sandwich composite containing defects10.1016/S0263-8223(98)00133-0 ↗
9. A non-isothermal process model for consolidation and void reduction during in-situ tow placement of thermoplastic composites10.1177/002199839502900803 ↗
10. Modeling of heat transfer and void dynamics for the thermoplastic composite tow-placement process10.1177/002199803035188 ↗
11. Bubble free resin for infusion process10.1016/j.compositesa.2004.10.030 ↗
12. Effects of cure cycle pressure and voids on some mechanical properties of carbon/epoxy laminates10.1016/0010-4361(95)96808-J ↗
13. Porosity reduction in the high-speed processing of glass–fiber composites by RTM10.1177/0021998304038649 ↗
14. Effects of low frequency vibration processing on carbon/epoxy laminates10.1016/0010-4361(91)90097-Z ↗
15. Void minimization in the manufacturing of carbon fiber composites by RTM
16. Effects of vibration during solidification
17. Heat generation, temperature, and thermal stress of structurally integrated piezo-actuators10.1177/1045389X9500600308 ↗
18. DeHoff · 1968