Dynamic particle analysis for the evaluation of particle degradation during compounding of wood plastic composites
Source abstract
Abstract
Abstract A dynamic image analysis method was applied for particle characterisation to study the effect of different process conditions during twin-screw compounding of WPC. The use of distributions based on different types of quantity is discussed with respect to their sensitivity to reveal the effects of different process conditions on particle degradation. Distributions based on length proved to be most suitable to represent the initially broad length distribution of the particles before processing. Sensitivity was strong enough to show differences in particle size after processing depending on process conditions. Particle size was reduced by more than 97% compared to initial size. Degradation was stronger with increasing wood content and when the screw design contained more mixing elements. The effect of screw speed and feed rate was dependent on filler content and screw design.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Polymer crystallization and properties · Recycling and Waste Management Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Carus · 2014
2. Mechanical properties of wood flake–polyethylene composites. Part I: effects of processing methods and matrix melt flow behaviour10.1016/S1359-835X(00)00160-3 ↗
3. Stark NM, Berger MJ. Effect of particle size on properties of wood-flour reinforced polypropylene composites. In: The fourth international conference on woodfiber–plastic composites. Madison, Wisconsin, USA; May 1997. p. 134–143.
4. Market and future trends for wood-polymer composites in Europe: the example of Germany
5. Raw materials for wood-polymer composites
6. Effect of wood particle size on mechanical properties of industrial wood particle–polyethylene composites10.14314/polimery.2011.375 ↗
7. Investigation on the dynamic melt rheological properties of polypropylene/wood flour composites
8. Fundamental studies on wood/cellulose-plastic composites: effects of co, position and cellulose dimension on the properties of cellulose/PP composite10.1007/s10086-007-0889-5 ↗
9. Effects of fiber characteristics on the physical and mechanical properties of wood plastic composites10.1016/j.compositesa.2009.06.003 ↗
10. Evaluation and optimization of the mechanical properties of highly filled PVC/(wood flour) composites by using experimental design10.1002/vnl.20264 ↗
11. Optimized material composition to improve the physical and mechanical properties of extruded wood-plastic composites (WPCs)10.1016/j.conbuildmat.2011.09.013 ↗
12. Effect of particle size and coupling agent concentration on mechanical properties of particulate-filled polymer composites10.1177/0892705709340962 ↗
13. Wood fiber derived from scrap pallets used in polypropylene composites
14. Effects of wood fiber characteristics on mechanical properties of wood/polypropylene composites
15. Effects of wood particle size and mixing ratios of HDPE on the properties of the composites10.1007/s00107-005-0072-x ↗
16. Effects of material parameters on the diffusion and sorption properties of wood-flour/polypropylene composites10.1002/app.25037 ↗
17. Wood particle size affects the decay resistance of woodfiber/thermoplastic composites
18. Krause A, Krause K-C. Relation between surface area and optimal concentration of coupling agent in WPC. In: Proceedings of 11th Pacific RIM bio-based composites symposium 2012. Shizuoka City, Japan; November 2012.
19. Effect of screw design on fiber damage in extrusion compounding and composite properties10.1002/pc.750160310 ↗
20. Effect of fiber length on processing and properties of extruded wood-fiber/HDPE composites10.1002/app.28720 ↗
21. Effects of fibre length and orientation distributions on the mechanical properties of short-fiber-reinforced polymers. A review
22. A new procedure for the analysis of fibre breakage after processing of fibre-reinforced thermoplastics10.1007/s12289-010-0859-0 ↗
23. Twin-screw extrusion impact on natural fibre morphology and material properties in poly(lactic acid) based biocomposites10.1016/j.indcrop.2013.01.026 ↗
24. Lignocellulosic fiber reinforced composites: influence of compounding conditions on defibrization and mechanical properties10.1002/app.38468 ↗
25. Methoden der Holzpartikelgrößenmessung – Von der technologischen Fragestellung zur aussagefähigen Statistik
26. Merkus · 2009
27. Recycle polypropylene (RPP) – wood saw dust (WSD) composites – part 1: the effect of different filler size and filler loading on mechanical and water absorption properties10.1177/0731684406062060 ↗
28. Effect of industrial wood particle size on mechanical properties of wood–polyvinyl chloride composites10.1007/s00107-011-0531-5 ↗
29. Segerhom · 2007
30. Precision and accuracy studies with kajaani fiber length analyzer10.3923/jas.2007.1043.1047 ↗
31. Size characterization of fibres and fines in hardwood kraft pulps10.1002/(SICI)1521-4117(199905)16:1<20::AID-PPSC20>3.0.CO;2-M ↗
32. Light scattering by wood fibers10.1364/AO.40.005064 ↗
33. Determination of fibre size distributions of injection moulded polypropylene/natural fibers using X-ray microtomography10.1002/adem.200700232 ↗
34. Influence of refiner fibre quality and fibre modification treatments on properties of injection-moulded beech wood-plastic composites10.1016/j.compositesa.2014.03.003 ↗
35. Processing of thermal sensitive materials – a case study for wood plastic composites10.1007/s00706-007-0606-5 ↗
36. Characterization of wood dust from furniture by scanning electron microscopy and energy-dispersive x-ray analysis10.2486/indhealth.MS1204 ↗
37. Polypropylene-natural fibre composites. Analysis of fibre structure modification during compounding and its influence on the final properties10.1163/156855408783810849 ↗
38. Effect of mixing conditions and initial fiber morphology on fiber dimensions after processing10.1016/j.compositesa.2008.12.014 ↗
39. A statistical analysis of fibre size and shape distribution after compounding in composites reinforced by natural fibres10.1016/j.compositesa.2011.07.012 ↗
40. Novel automated method for evaluating the morphological changes of cellulose fibres during extrusion-compounding of plastic-matrix composites10.1016/j.compositesa.2014.10.026 ↗
41. ISO/FDIS 16065-1 · 2013
42. Representation and evaluation of particle size analysis data10.1002/ppsc.19840010115 ↗
43. Correlation between processing conditions and fiber breakage during compounding of glass fiber-reinforced polyamide10.1002/pc.21217 ↗
44. Koplin T, Endres HJ, Ziegmann G. Influence of the melting zone on compounding of cellulose fiber reinforced polylactide. In: Proceedings of ANTEC 2013–71st Annual Technical Conference of the Society of Plastics Engineers. Cincinnati, USA, vol. 1 of 3; April 2013.
45. Witt W, Köhler U, List J. Current limits of particle size and shape analysis with high speed image analysis. In: Proceedings of PARTEC – International Congress on Particle Technology. Nürnberg, Germany; March 2007.
46. DIN ISO 9276-1 · 2004
47. Klyosov · 2007
48. Wood based PLA and PP composites: Effect of fibre type and matrix polymer on fibre morphology, dispersion and composite properties10.1016/j.compositesa.2014.02.002 ↗
49. Numerical simulation and experimental validation of mixing performance of kneading discs in a twin screw extruder10.1002/pen.21404 ↗
50. Rauwendaal · 2014
51. Influence of extrusion conditions on fiber breakage along the screw profile during twin screw compounding of glass fiber-reinforced PA10.3139/217.2659 ↗