Development of a segregation model beyond McLean based on atomistic simulations

Abstract In the present atomistic study, layer-specific segregation to the surface is investigated for an exemplary (100) surface in iron–chromium alloys using an embedded-atom potential. Through a continuous variation of the chemical potential difference in the semi-grandcanonical ensemble, the full composition range is explored at temperatures between 600 K to 1400 K. The obtained layer-specific segregation curves demonstrate the well-known limitations of the widely used McLean model for interface segregation, i.e. a monolayer model imposing ideal behavior. However, keeping the original idea of McLean, the segregation model is extended in two ways in order to provide a complete analytical description of segregation: Firstly, the entire surface is hypothetically replaced by an equivalent single layer with identical segregation properties, which accounts for all subsurface layer effects, but also enables the application of an effective monolayer model with only one single energy of segregation. Secondly, directly following from the general treatment assuming non-ideal solution behavior, the energy of segregation becomes composition-dependent. The validity and accuracy of the proposed analytical model is confirmed by fitting the composition-dependent energy of segregation to the thermodynamically unambiguous solute excess. The change in surface formation energy according to the interfacial adsorption equation can be described excellently over the entire composition range for all investigated temperatures. The model can be applied to experimental data and directly transferred to grain boundaries.