Enhanced subsurface grain refinement during transient shear-based surface generation
Source abstract
Abstract
Abstract The present work combines quantitative orientation imaging microscopy and in situ digital image correlation to identify heterogeneities in the coupled mechanics and microstructure evolution occurring in the deformed subsurface during transient shear-based surface generation. Subsurface microstructure exhibited heterogeneities in terms of thickness of the ultrafine-grained layer and recrystallization fraction as a function of position along the surface wavelength. It was observed that subsurface microstructure evolution followed accelerated recrystallization kinetics due to strain path changes occurring in the subsurface during transient surface generation. The magnitudes of these strain path changes and pre-straining of the deformed subsurface were observed to correlate well with changes in the information entropy of the corresponding subsurface crystallographic textures. A phenomenological model for predicting the information entropy of the orientation distribution function based on strain path changes and strain history was formulated and validated for monotonic loading paths. The implications of this generalized framework for modeling and controlling subsurface microstructure in transient surface generation are briefly discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Microstructure and mechanical properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Enhanced osteoblast response to an equal channel angular pressing-processed pure titanium substrate with microrough surface topography10.1016/j.actbio.2009.04.038 ↗
2. Ultrafine grained titanium for biomedical applications: an overview of performance10.1016/j.jmrt.2013.07.003 ↗
3. Ultrafine-grained surface layer on mg–al–zn alloy produced by cryogenic burnishing for enhanced corrosion resistance10.1016/j.scriptamat.2011.06.013 ↗
4. Fatigue life improvement through surface nanostructuring of stainless steel by means of surface mechanical attrition treatment10.1016/j.scriptamat.2006.01.049 ↗
5. Thermal stability and strength of deformation microstructures in pure copper10.1016/j.actamat.2012.04.022 ↗
6. Effect of surface roughness of hydroxyapatite on human bone marrow cell adhesion, proliferation, differentiation and detachment strength10.1016/S0142-9612(00)00174-5 ↗
7. Surfaces by vibration/modulation-assisted texturing for tribological applications
8. Morphology of femtosecond-laser-ablated borosilicate glass surfaces10.1063/1.1619560 ↗
9. A time based method for predicting the workpiece surface micro-topography under pulsed laser ablation10.1016/j.jmatprotec.2014.07.008 ↗
10. Mapping of femtosecond laser-induced collateral damage by electron backscatter diffraction10.1063/1.3653839 ↗
11. Mann · 2014
12. Microstructure and strength of nickel at large strains10.1016/S1359-6454(00)00082-3 ↗
13. Modelling of work hardening and stress saturation in {FCC} metals10.1016/S0079-6425(97)00032-7 ↗
14. Nanotwinned microstructures from low stacking fault energy brass by high-rate severe plastic deformation10.1016/j.scriptamat.2008.12.024 ↗
15. Effect of severe plastic deformation in machining elucidated via rate-strain-microstructure mappings
16. Mapping subgrain sizes resulting from severe simple shear deformation10.1016/j.actamat.2011.09.055 ↗
17. Controlling deformation and microstructure on machined surfaces10.1016/j.actamat.2011.03.076 ↗
18. A study of the influence of superimposed low-frequency modulation on the drilling process10.1016/S0141-6359(97)00085-8 ↗
19. Energy dissipation in modulation assisted machining10.1016/j.ijmachtools.2013.07.007 ↗
20. Modeling transients in the mechanical response of copper due to strain path changes10.1016/j.ijplas.2006.08.001 ↗
21. Effect of strain path on grain refinement in severely plastically deformed copper10.1016/j.scriptamat.2010.10.002 ↗
22. The process of grain refinement in equal-channel angular pressing10.1016/S1359-6454(97)00494-1 ↗
23. Crystallographic textures resulting from severe shear deformation in machining10.1007/s11661-014-2672-8 ↗
24. Anomalous evolution of microstructure and crystallographic texture during indentation10.1016/j.actamat.2015.12.028 ↗
25. Incipient straining in severe plastic deformation methods10.1557/jmr.2014.26 ↗
26. Characterization of deformation field in plane-strain indentation of metals10.1088/0022-3727/41/7/074026 ↗
27. Quantifying the progression of dynamic recrystallization in severe shear deformation at high strain rates10.1557/jmr.2013.201 ↗
28. Humphreys · 2004
29. A novel pole figure inversion method: specification of the MTEX algorithm10.1107/S0021889808030112 ↗
30. An analysis of the surface generation mechanics of the elliptical vibration texturing process10.1016/j.ijmachtools.2012.08.003 ↗
31. Liu · 2015
32. Kocks · 2000
33. Entropy optimization in quantitative texture analysis. ii. application to poletoorientation density inversion10.1063/1.347267 ↗
34. Characterisation of fine-scale microstructures by electron backscatter diffraction (ebsd)10.1016/j.scriptamat.2004.05.016 ↗
35. Defect equilibria in solids
36. A paradox of decreasing entropy in multiscale monte carlo grain growth simulations10.3390/entropy-e10020049 ↗
37. Hosford · 1993
38. Texture evolution during multi-pass equal channel angular extrusion of copper: neutron diffraction characterization and polycrystal modeling10.1016/j.actamat.2005.01.023 ↗
39. On the stability of the ideal orientations of rolling textures for f.c.c. polycrystals10.1016/0956-7151(92)90481-S ↗
40. Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: theory, experiments, applications10.1016/j.actamat.2009.10.058 ↗