“Colossal” interstitial supersaturation in delta ferrite in stainless steels: (II) low-temperature nitridation of the 17-7 PH alloy
Source abstract
Abstract
Abstract Low-temperature gas-phase nitridation has been studied in interstitially-hardened 17-7 precipitation-hardening stainless steel. After nitridation, conventional transmission electron microscopy reveals that delta ferrite grains in such alloys show a uniform weak diffraction contrast. Chemical analysis reveals that the weak-contrast ferrite grains contain an enormous interstitial nitrogen supersaturation (>20 at.%). Surprisingly, there is no significant tetragonality in these weak-contrast ferrite grains. Such weak diffraction contrast is attributed to a nanometer-scale nitridation-induced spinodal decomposition of delta ferrite grains. In addition, nitride nanoparticles are observed in the steel, and were identified as rocksalt-structured MN nitride (M: Fe, Cr, Ni, and Al). Further, platelets of hexagonal M 2 N 1- x are observed at low nitriding temperatures (623 and 653 K), but were absent during nitridation at a higher temperature (713 K).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced Materials Characterization Techniques · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. “Colossal” interstitial supersaturation in delta ferrite in stainless steels—I. Low-temperature carburization10.1016/j.actamat.2014.12.013 ↗
2. Orientation dependence of nitrogen supersaturation in austenitic stainless steel during low-temperature gas-phase nitriding10.1016/j.actamat.2014.07.007 ↗
3. Controlled dissolution of colossal quantities of nitrogen in stainless steel10.1007/s11661-006-0039-5 ↗
4. S-phase surface engineering of Fe–Cr, Co–Cr and Ni–Cr alloys10.1179/095066009X12572530170589 ↗
5. On the microstructure and phase identification of plasma nitrided 17-4PH precipitation hardening stainless steel10.1016/j.surfcoat.2007.10.036 ↗
6. Low temperature plasma nitriding characteristics of precipitation hardening stainless steel10.1179/026708403225007545 ↗
7. Activated gas nitriding of 17-4 PH stainless steel10.1016/j.surfcoat.2005.11.034 ↗
8. Cellular precipitation at a 17-7 PH stainless steel interphase interface during low-temperature nitridation10.1007/s11661-014-2302-5 ↗
9. Transmission EBSD from 10 nm domains in a scanning electron microscope10.1111/j.1365-2818.2011.03566.x ↗
10. Orientation mapping of nanostructured materials using transmission Kikuchi diffraction in the scanning electron microscope10.1016/j.ultramic.2012.06.004 ↗
11. Applications of automated high resolution strain mapping in TEM on the study of strain distribution in MOSFETs10.1017/S1431927614007053 ↗
12. Strain mapping at the nanoscale using precession electron diffraction in transmission electron microscope with off axis camera10.1063/1.4901435 ↗
13. J.C. Dalton, Masters Thesis, Case Western Reserve University, 2014.
14. Quantitative atom probe analysis of carbides10.1016/j.ultramic.2010.12.024 ↗
15. NiAl precipitation in delta ferrite grains of 17-7 precipitation-hardening stainless steel during low-temperature interstitial hardening10.1016/j.scriptamat.2015.07.001 ↗
16. Structure and properties of ion-nitrided stainless steels10.1007/BF01106549 ↗
17. The electron and field ion metallography of zones in nitrided Fe-Mo alloys10.1016/0001-6160(73)90030-8 ↗
18. Precession electron diffraction assisted orientation mapping in the transmission electron microscope10.4028/www.scientific.net/MSF.644.1 ↗
19. Influence of isothermal phase transformations on toughness and pitting corrosion of super duplex stainless steel SAF 250710.1179/mst.1993.9.7.545 ↗
20. The precipitation of Cr2N in 17%Cr steels10.1179/030634575790444685 ↗
21. Structure refinement for Cr2N10.1016/0022-5088(90)90446-Q ↗
22. Microstructure development of steel during severe plastic deformation10.1007/BF03027415 ↗
23. Nitrogen distribution in austenitic high-nitrogen chromium-manganese steel under friction and high-pressure torsion10.1134/S0031918X13080097 ↗
24. Diffusion transformations in steels due to cold deformation10.1007/s11041-009-9083-2 ↗
25. The mechanism of formation of nanostructure and dissolution of cementite in a pearlitic steel during high pressure torsion10.1016/S1359-6454(03)00419-1 ↗
26. Atomic-scale mechanisms of deformation-induced cementite decomposition in pearlite10.1016/j.actamat.2011.03.022 ↗
27. Non-stoichiometry and antiferromagnetic phase transition of NaCl-type CrN thin films prepared by reactive sputtering10.2320/matertrans1989.37.121 ↗
28. Microstructure and stress development in magnetron sputtered TiAlCr(N) films10.1016/S0257-8972(01)01424-4 ↗
29. Synthesis of stoichiometric and bulk CrN through a solid-state ion-exchange reaction10.1002/chem.201202197 ↗
30. Crystal structure and morphology of AIN precipitating on nitriding of an Fe-2at.% Al alloy10.1080/01418619508236255 ↗
31. The kinetics of the internal nitriding of Fe-2 at. pct Al alloy10.1007/BF02649075 ↗
32. Expanded austenite, crystallography and residual stress10.1179/026708410X12506870724316 ↗
33. Numerical simulations of carbon and nitrogen composition-depth profiles in nitrocarburized austenitic stainless steels10.1007/s11661-014-2377-z ↗
34. The nitrogen transport in austenitic stainless steel at moderate temperatures10.1063/1.126294 ↗
35. Poisson effects on X-ray diffraction patterns in low-temperature-carburized austenitic stainless steel10.1007/s11661-009-9814-4 ↗
36. Schick · 1966