An evaluation of residual stresses in graphite/PMR-15 composites by X-ray diffraction
Source abstract
Abstract
In this work, a method based on X-ray diffraction measurements of internal stresses in embedded metallic ellipsoidal inclusions is briefly described. The method has been recently developed for the determination of residual thermal stresses in high temperature graphite/polyimide composites. The effects of external bending loads and aging on the measurements of the internal stress in unidirectional and woven graphite fiber (T650-35)/polyimide (PMR-15) composites were examined in addition to several other factors, which could influence the accuracy of the stress measurements. Such factors as the volume fraction of inclusions, their aspect ratios and the interaction between individual embedded inclusions were also evaluated in this study. It has been shown that despite its complexity the proposed method can be successfully applied to the evaluation of residual stresses in high temperature polymer matrix composites subjected to external loads and aging.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Composite Material Mechanics · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Hole-drilling strain-gage method of measuring residual stresses10.1007/BF02326825 ↗
2. Effect of curing stress on the first ply-failure in composite laminates10.1177/002199837901300101 ↗
3. Residual surface stresses in laminated cross-ply fiber-epoxy composite materials10.1007/BF02328439 ↗
4. Review of the mechanics of embedded optical sensors10.1520/CTR10481J ↗
5. Fundamentals and applications of micro Raman spectroscopy to strain measurements in fibre reinforced composites10.1179/imr.1995.40.3.116 ↗
6. Thermal deformation of anti-symmetric laminates at cure
7. Residual stress measurement in composite using the cure-referencing method10.1007/BF02327544 ↗
8. Stress measurement in polymeric materials by X-ray diffraction10.1002/pen.760160903 ↗
9. Stress measurement in graphite/epoxy composites by X-ray diffraction from fillers10.1177/002199837901300105 ↗
10. Stress measurements in graphite/epoxy uniaxial composites by X-rays10.1002/pc.750010103 ↗
11. Predecki P, Barrett CS. Residual stresses in resin matrix composites. In Kula E, editor. 28th Sagamore army materials research conference, Lake Placid, July 13–17; 1981. p. 409–24.10.1007/978-1-4899-1884-0_23 ↗
12. X-ray diffraction investigation of triaxial residual stresses in composite materials10.1177/002199839302701401 ↗
13. A micro-mechanical model for X-ray stress analysis of fiber reinforced composites10.1106/VYAF-V4GH-MBNN-CWM6 ↗
14. Particular adaptation of X-ray diffraction to fiber reinforced composites10.1016/S0167-6636(02)00184-9 ↗
15. An analysis of residual thermal stresses in a unidirectional graphite/PMR-15 composite based on the X-ray diffraction measurements10.1016/S0266-3538(01)00060-4 ↗
16. The use of X-ray diffraction measurements to determine the effect of bending loads on internal stresses in aluminum inclusions embedded in a unidirectional graphite fiber/PMR-15 composite10.1016/S0266-3538(01)00105-1 ↗
17. Determination of interlaminar residual thermal stresses in a woven 8HS graphite/PMR-15 composite using X-ray diffraction measurements10.1080/15376490290097026 ↗
18. Benedikt B, Predecki PK, Kumosa L, Kumosa M. Measurement of residual stresses in polymer matrix fiber reinforced composites based on X-ray diffraction. In Denver X-ray conference, August 2001, Steamboat Springs, CO. Adv X-ray Anal 2001;45:218–24.
19. Benedikt B, Gentz M, Kumosa L, Predecki PK, Armentrout D, Kumosa M, et al. The use of X-ray diffraction measurements to determine the effect of aging on residual stresses in unidirectional and woven graphite/polyimide composites. In The 51st annual Denver X-ray conference, Colorado Springs, August 2002. International Center for Diffraction Data. Adv X-ray Anal 2002:46;112–18.
20. Benedikt B. Analysis of residual stresses in graphite fiber/PMR-15 composites. PhD Thesis, Department of Engineering, University of Denver, Denver (CO); June 2003.
21. X-ray diffraction experiments on aged graphite fiber/polyimide composites with embedded aluminum inclusions10.1016/j.compositesa.2004.02.008 ↗
22. Analysis of stresses in aluminum particles embedded inside unidirectional and woven graphite/polyimide composites subjected to large bending loads10.1080/15376490490257648 ↗
23. Elastic–plastic and failure properties of a unidirectional graphite/PMR-15 composite at room and elevated temperatures10.1016/S0266-3538(00)00163-9 ↗
24. Comparison of the ±45° off axis and iosipescu shear tests for woven fabric composite materials
25. Higher operating temperature propulsion components
26. Mechanical behavior of a woven graphite/PMR-15 composite at room and elevated temperatures determined from the ±45° tensile and Iosipescu shear tests
27. Meso- and micro-stress analyses in an 8HS graphite/polyimide woven composite subjected to biaxial in-plane loads at room temperature10.1016/S0266-3538(02)00315-9 ↗
28. An investigation of damage initiation in woven graphite fiber/polyimide composites subjected to shear10.4028/www.scientific.net/KEM.251-252.447 ↗
29. Visco-elastic stress distributions and elastic properties in unidirectional composites with large volume fractions of fibers10.1016/S1359-6454(03)00168-X ↗
30. The influence of sizing on the durability of high-temperature polymer composites10.1177/09540083030154002 ↗
31. In-plane shear testing of woven graphite/polyimide composites with medium and high modulus graphite fibers at room and 316°C temperatures10.1016/S0266-3538(03)00260-4 ↗
32. Residual stresses in unidirectional carbon fiber/polyimide composites as a function of aging10.1016/j.compscitech.2003.12.006 ↗
33. Mechanical response of a woven graphite/polyimide composite to in-plane shear dominated loads at room an elevated temperatures10.1016/j.actamat.2004.08.019 ↗
34. The determination of the elastic field of an ellipsoidal inclusion, and related problems10.1098/rspa.1957.0133 ↗
35. Mura · 1987
36. Average stress in matrix and average elastic energy of materials with misfitting inclusions10.1016/0001-6160(73)90064-3 ↗
37. Cullity · 1978
38. Noyan · 1987
39. Schwartz · 1987
40. Viscoelastic properties of addition-cured polymides used in high temperature polymer matrix composites, composites design, manufacturing, and applications
41. Reddy · 1997
42. Physical and chemical aging effects in PMR-15 neat resin
43. Mechanical properties of degraded PMR-15 resin
44. Micromechanics of randomly oriented ellipsoidal inclusion composite. Part I: stress, strain and thermal expansion10.1063/1.362638 ↗
45. Micromechanics of randomly oriented ellipsoidal inclusion composite. Part II: elastic moduli10.1063/1.362639 ↗
46. A new approach to the application of Mori–Tanaka’s theory in composite materials10.1016/0167-6636(87)90005-6 ↗
47. Two ellipsoidal inhomogeneities and related problems treated by equivalent inclusion method10.1115/1.3423718 ↗
48. Benedikt B, Lewis M, Rangaswamy P. Multi-inclusion model for particulate composite with periodically and randomly distributed reinforcements. J Mech Phys Solids [submitted].