Micromechanical behaviour of a two-phase Ti alloy studied using grazing incidence diffraction and a self-consistent model
Source abstract
Abstract
The mechanical behaviour of each phase in two-phase titanium Ti-18 was studied at room temperature under a low strain rate tensile test until fracture. Due to its selectivity, the X-ray diffraction method was applied for in-situ tensile test to analyse the behaviour of each phase in the direction perpendicular to the loading force. In addition, the biaxial stress states of the initial sample, as well as those of the sample during the tensile test, were determined using multi-reflection grazing incidence X-ray diffraction (MGIXD). The experimental data were compared with the prediction of an elasto-plastic self-consistent model in order to study slips on crystallographic planes and mechanical effects occurring during plastic deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · High-Velocity Impact and Material Behavior · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Lütjering · 2007
2. Modelling of texture evolution for materials of hexagonal symmetry – II Application to zirconium and titanium α or near α alloys10.1016/0956-7151(94)00329-G ↗
3. Micromechanical modelling of monotonic loading of CP α-Ti: correlation between macroscopic and microscopic behavior10.1016/j.msea.2013.02.022 ↗
4. Orientation informed nanoindentation of alpha-titanium: indentation pileup in hexagonal metals deforming by prismatic slip10.1557/jmr.2011.334 ↗
5. Experimental and theoretical studies of intergranular strain in an alpha titanium alloy during plastic deformation10.1016/j.actamat.2013.06.022 ↗
6. Intergranular strain evolution in titanium during tensile loading: neutron diffraction and polycrystalline model10.1007/s11661-015-3073-3 ↗
7. In situ monitoring of the deformation mechanisms in titanium with different oxygen contents10.1016/j.msea.2015.03.044 ↗
8. Deformation twinning in Ti-6Al-4V during low strain rate-moderate strains at room temperature10.1016/j.msea.2010.05.039 ↗
9. Lattice strain evolution during uniaxial tensile loading of stainless steel10.1016/S0921-5093(98)00878-8 ↗
10. Modeling the room temperature deformation of a two phase zirconium alloy10.1016/j.actamat.2008.09.020 ↗
11. Elastoplastic deformation and damage process in duplex stainless steels studied using synchrotron and neutron diffractions in comparison with a self-consistent model10.1016/j.ijplas.2016.01.018 ↗
12. An in situ high energy X-ray diffraction study of micromechanical behavior of multiple phases in advanced high-strength steels10.1016/j.actamat.2009.05.002 ↗
13. Load partitioning between ferrite and cementite during elasto-plastic deformation of an ultrahigh-carbon steel10.1016/j.actamat.2006.11.004 ↗
14. In situ neutron measurements and modelling of the intergranular strains in the near-β titanium alloy Ti-β21S10.1016/j.actamat.2016.02.065 ↗
15. Effect of texture on load partitioning in Ti-6Al-410.1016/j.actamat.2012.03.039 ↗
16. Evolution of lattice strain in Ti-6Al-4V during tensile loading at room temperature10.1016/j.actamat.2008.08.030 ↗
17. Micromechanics of Ti–10V–2Fe–3Al: in situ synchrotron characterisation and modeling10.1016/j.actamat.2007.08.049 ↗
18. Determination of single-crystal elasticity constants in a cubic phase within a multiphase alloy: X-ray diffraction10.1107/S0021889804023441 ↗
19. Theoretical investigation of the high pressure structure, lattice dynamics, phase transition, and thermal equation of state of titanium metal10.1063/1.3407560 ↗
20. New approach to stress analysis based on grazing-incidence X-ray diffraction10.1107/S0021889801005404 ↗
21. Stress analysis of polycrystalline thin film and surface regions by X-ray diffraction10.1107/S0021889804029516 ↗
22. X-ray residual stress analysis in thin films under grazing incidence – basic aspects and applications10.1179/174328405X14100 ↗
23. Residual stress fields analysis in rolled Zircaloy-4 plates: grazing incidence diffraction and elastoplastic self-consistent model10.1016/j.actamat.2014.02.031 ↗
24. Analysis of stresses and crystal structure in the surface layer of hexagonal polycrystalline materials: a new methodology based on grazing incidence diffraction10.1107/S1600576715021810 ↗
25. Stress measurements by multi-reflection grazing-incidence X-ray diffraction method (MGIXD) using different radiation wavelengths and different incident angles10.1016/j.actamat.2016.10.029 ↗
26. Problem of elastic anisotropy and stacking faults in stress analysis using multireflection grazing-incidence X-ray diffraction10.1107/S1600576715002666 ↗
27. Marciszko · 2013
28. X-ray grazing incidence technique—corrections in residual stress measurement- a review
29. Transition theories of elastic-plastic deformation of metallic polycrystals10.1007/BF00789222 ↗
30. Phase teansformations of TIMETAL-18 as a new titanium alloy with bimodal microstructure10.4028/www.scientific.net/AMR.922.418 ↗
31. Orientation mapping of nanostructured materials using transmission Kikuchi diffraction in the scanning electron microscope10.1016/j.ultramic.2012.06.004 ↗
32. High quality transmission Kikuchi diffraction analysis of deformed alloys - case study10.1016/j.matchar.2016.10.013 ↗
33. Kallend · 1990
34. Determination of stress field in textured duplex steel using TOF neutron diffraction method10.1016/j.actamat.2007.07.044 ↗
35. Quantitative estimation of incompatibility stresses and elastic energy stored in ferritic steel10.1107/S0021889808023911 ↗
36. Zur Berechnung der vielkristallinen Elastizitätskonstanten aus den Werten der Einkristalle
37. Hauk · 1997