journal article·2018-11Open access

The influence of the cube component on the mechanical behaviour of copper polycrystalline samples in tension

B. Bacroix, S. Queyreau, D. Chaubet, E. Siv, Th Chauveau

Acta Materialia· Volume 160

Abstract

Abstract Copper tensile samples were prepared by various thermomechanical treatments (rolling and annealing) producing different initial textures, characterized mainly by an increasing Cube component. These samples were characterized microstructurally (orientation, grain boundary and grain size distributions) and mechanically (tensile stress – strain curves, hardness, dislocation density). It is found that an increase of the Cube percentage leads to an increase of the initial yield stress and to a decrease of the hardening rate at high strains. The macroscopic mechanical behaviour is compared with simulations performed with a simple Taylor type model including anisotropic plastic behaviour and dislocation-based constitutive equations. We show that the proposed modelling allows to reproduce all experimental curves with a limited number of adjusted parameters and that dynamic softening is more active in the Cube orientation than in any other present orientation. This is also confirmed by the EBSD and X- Ray data. As a result, the Cube orientation is shown to be softer in terms of texture and hardening rate. The opposite strengthening effect observed on the initial yield stress is shown to be due to heterogeneous grain size distributions resulting from complex recrystallization mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. A quantitative analysis of the evolution of texture and stored energy during annealing of cold rolled copper10.1016/j.actamat.2003.08.039 ↗
2. Temperature and orientation dependent plasticity features of Cu and Al single crystals under axial compression—I. Lattice rotation effects and true hardening stages10.1016/S1359-6454(96)00094-8 ↗
3. A dislocation density-based single crystal constitutive equation10.1016/j.ijplas.2009.11.004 ↗
4. Role of stored energy in static recrystallization of cold rolled copper single and multicrystals10.1016/S1359-6454(00)00155-5 ↗
5. Generalized vertex model of recrystallization - application to polycrystalline copper10.1016/j.commatsci.2007.09.014 ↗
6. Overview no. 76: mechanism of deformation and development of rolling textures in polycrystalline f.c.c. metals—I. Description of rolling texture development in homogeneous CuZn alloys10.1016/0001-6160(88)90172-1 ↗
7. Orientation dependence of stored energy of cold work in 50% cold rolled copper10.1179/030634584790419890 ↗
8. Recrystallisation mechanisms and the origin of cube texture in copper10.1016/0001-6160(82)90033-5 ↗
9. Slip in twinned copper crystals10.1016/0001-6160(65)90179-3 ↗
10. Room temperature recovery in rolled polycrystalline copper after many years
11. Dislocation arrangement and residual long-range internal stresses in copper single crystals at large deformations10.1016/S1359-6454(96)00155-3 ↗
12. Effect of grain orientation on deformation structure and recrystallization behavior of tensile strained copper
13. Evolution of dislocation density distributions in copper during tensile deformation10.1016/j.actamat.2013.08.027 ↗
14. Microstructural evolution, mechanical properties, and strain hardening behavior of ultrafine grained commercial pure copper during the accumulative roll bonding process10.1016/j.msea.2015.10.043 ↗
15. Modeling of large strain hardening during grain refinement10.1016/j.scriptamat.2011.11.002 ↗
16. Formation mechanism and organizational controlling of ultra-fine-grain copper processed by asymmetrical accumulative rolling-bond and annealing10.1016/S1003-6326(11)61516-1 ↗
17. Orientation image-based micromechanical modelling of subgrain texture evolution in polycrystalline copper10.1016/j.actamat.2008.04.016 ↗
18. Temperature dependence and size effects on strain hardening mechanisms in copper polycrystals10.1016/j.msea.2013.03.025 ↗
19. A phenomenological anisotropic description for dislocation storage and recovery processes in fcc crystals10.1016/j.commatsci.2011.10.020 ↗
20. Modeling of latent hardening produced by complex loading paths in FCC alloys10.1016/j.ijplas.2012.10.010 ↗
21. The double effect of grain size on the work hardening behaviour of polycrystalline copper10.1016/0956-716X(94)90024-8 ↗
22. On the anomalous hardening during annealing of heavily deformed f.c.c. metals10.1016/j.msea.2009.09.054 ↗
23. Experimental and numerical determination of the intragranular work hardening in a cold rolled multicrystal10.1016/S0921-5093(97)00313-4 ↗
24. Assessment of strain hardening in copper single crystals using in situ SEM microshear experiments10.1016/j.actamat.2016.04.055 ↗
25. A model for the grain size dependent work hardening of copper10.1016/j.scriptamat.2006.05.018 ↗
26. Work hardening of copper single crystals with multiple glide orientations10.2320/matertrans1960.16.629 ↗
27. Physics and phenomenology of strain hardening: the FCC case10.1016/S0079-6425(02)00003-8 ↗
28. Tensile deformation of aluminum single crystals at low temperatures10.1016/0001-6160(60)90127-9 ↗
29. The cube texture revisited
30. Determination of the orientation distribution function from pole figures in arbitrarily defined cells10.1002/pssb.2221340205 ↗
31. Device for SEM and EBSP in situ tensile tests up to 800°C
32. Influence of stored energy on twin formation during primary recrystallization10.1016/j.msea.2013.09.071 ↗
33. Microstructural evolution during grain boundary engineering of low to medium stacking fault energy fcc materials10.1016/S1359-6454(02)00090-3 ↗
34. Recrystallization kinetics in copper: comparison between techniques10.1007/BF02670758 ↗
35. Annealing twin formation and recrystallization study of cold-drawn copper wires from EBSD measurements10.1016/j.matchar.2006.09.009 ↗
36. The effect of the angle between loading axis and twin boundary on the mechanical behaviors of nanotwinned materials10.1016/j.matdes.2012.08.080 ↗
37. Impact of the grain size distribution on the yield stress of heterogeneous materials10.1016/j.ijplas.2006.03.004 ↗
38. A representative grain size for the mechanical response of polycrystals10.1016/j.msea.2009.06.045 ↗
39. Boundary strengthening in undeformed and deformed polycrystals10.1016/j.msea.2005.04.061 ↗
40. The evolution with strain of the stored energy in different texture components of cold-rolled IF steel revealed by high resolution X-ray diffraction10.1016/j.matchar.2015.04.005 ↗
41. Asymetric X-Ray line broadening of plastically deformed crystals. 1. Theory10.1107/S0021889887009178 ↗
42. The contrast factors of dislocations in cubic crystals: the dislocation model of strain anisotropy in practice10.1107/S0021889899009334 ↗
43. Crystallite size distribution and dislocation structure determined by diffraction profile analysis: principles and practical application to cubic and hexagonal crystals10.1107/S0021889801003715 ↗
44. Assessment of geometrically necessary dislocation levels derived by 3D EBSD10.1016/j.actamat.2015.06.051 ↗
45. Some geometrical relations in dislocated crystals10.1016/0001-6160(53)90054-6 ↗
46. About quantitative EBSD analysis of deformation and recovery substructures in pure Tantalum10.1088/1757-899X/89/1/012038 ↗
47. Statistical analysis of dislocations and dislocation boundaries from EBSD data10.1016/j.ultramic.2017.04.005 ↗
48. Physical analyses of crystal plasticity by DD simulations10.1016/j.scriptamat.2005.10.066 ↗
49. Siv · 2018
50. Numerical study of textures and Lankford values for FCC polycrystals by use of a modified Taylor model10.1016/j.commatsci.2003.10.011 ↗
51. Multislip in f.c.c. crystals a theoretical approach compared with experimental data10.1016/0001-6160(82)90184-5 ↗
52. Modeling dislocation storage rates and mean free paths in face-centered cubic crystals10.1016/j.actamat.2008.08.012 ↗
53. Latent hardening in copper and aluminium single crystals10.1016/0001-6160(80)90162-5 ↗
54. Potentiality of mean-field approaches for recrystallisation: characterization of the deformed state of polycrystals
55. Discrete dislocation density modelling of single phase FCC polycrystal aggregates10.1016/j.actamat.2004.08.044 ↗
56. Finite element implementation of dislocation-density-based crystal plasticity model and its application to pure aluminum crystalline materials10.1016/j.ijmecsci.2016.11.011 ↗
57. Finite-element simulations of earing in polycristalline materials using a texture-adjusted strain-rate potential10.1088/0965-0393/3/1/001 ↗