Joule debonding of carbon reinforced polymer (CFRP) lap shear joints bonded with graphene nanoplatelets (GNPs)/epoxy nanocomposites
Source abstract
Abstract
The potential of Joule heating CFRPs joints bonded with conductive graphene/epoxy nanocomposites as adhesives for a selective debonding was investigated. To ensure a localized softening of the bondline without altering the adherend’s structure, the epoxy used in the adhesive’s formulation was chosen to have a considerably lower T g than the adherend. Joule heating the bondline considerably reduced the lap shear strength (LSS) relative to when the test was performed at room temperature, due to thermally induced structural changes promoted in the polymer network, which was consistent with the nanocomposites’ thermomechanical behavior predicted by DMTA. The minimum LSS value was reached in the vicinity of the adhesive’s T g , allowing an ease deconstruction of the joints. SEM characterization of their fracture surfaces revealed that by controlling the adhesive’s formulation and their Joule heating the joints’ failure mechanism can be tuned to ensure the recovery of undamaged adherends that can be reused.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Mechanical Behavior of Composites · Carbon Nanotubes in Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Carbon Fiber Reinforced Thermoset Composite with Near 100% Recyclability10.1002/adfm.201602056 ↗
2. A review on recycling and reuse methods for carbon fiber/glass fiber composites waste from wind turbine blades10.1016/j.compositesb.2021.108768 ↗
3. Carbon Fiber - Global Market Trajectory & Analytics. Global Industry Analysts, Inc.; n.d.
4. Rademacker · 2018 · 24
5. Current status of carbon fibre and carbon fibre composites recycling10.1016/j.compositesb.2020.108053 ↗
6. Anticipating in-use stocks of carbon fiber reinforced polymers and related waste flows generated by the commercial aeronautical sector until 205010.1016/j.resconrec.2017.06.023 ↗
7. Assessment of harmfulness and biological effect of carbon fiber dust generated during new carbon fiber recycling method10.1016/j.jhazmat.2019.120777 ↗
8. Past, present and future prospective of global carbon fibre composite developments and applications10.1016/j.compositesb.2022.110463 ↗
9. Design and Manufacture of Structural Composites
10. An updated review of adhesively bonded joints in composite materials10.1016/j.ijadhadh.2016.10.010 ↗
11. Adhesively bonded joints in composite materials: An overview
12. Review of debonding techniques in adhesively bonded composite structures for sustainability
13. Resistive embedded heating for homogeneous curing of adhesively bonded joints10.1016/j.ijadhadh.2014.10.002 ↗
14. On non-linear thermal stresses in an adhesively bonded single lap joint10.1016/S0045-7949(01)00139-0 ↗
15. Graphene nanoplatelets/epoxy nanocomposites as conductive adhesives for out-of-autoclave in-situ CFRPs repair10.1016/j.compscitech.2023.110007 ↗
16. Static and dynamic mechanical behavior of carbon fiber reinforced plastic (CFRP) single-lap shear joints joule-bonded with conductive epoxy nanocomposites10.3390/jcs8030112 ↗
17. Celine LD, Pauley GA. Method for Removing Metal Cladding from Airfoil Substrate. US 6843928 B2, 2005.
18. Holland BK. Blade Shield Removal and Replacement. US 10138732 B2, 2018.
19. The effect of temperature on the mechanical properties of adhesives for the automotive industry
20. A review on the temperature and moisture degradation of adhesive joints
21. Wai Ren Y. Effect of adhesive modification on the SLJ strength for disassembly purpose. Nanyang Technological University Singapore; 2019.
22. Electrolytically assisted debonding of adhesives: An experimental investigation10.1016/j.ijadhadh.2011.09.003 ↗
23. A comprehensive review on structural joining techniques in the marine industry10.1016/j.compstruct.2022.115490 ↗
24. Debondable adhesives and their use in recycling10.1039/D1GC03306A ↗
25. Joining of carbon fibre reinforced polymer (CFRP) composites and aluminium alloys – A review10.1016/j.compositesa.2017.06.007 ↗
26. Formation of percolating networks in multi-wall carbon-nanotube–epoxy composites10.1016/j.compscitech.2004.01.025 ↗
27. Two percolation thresholds in carbon nanotube epoxy composites10.1016/j.compscitech.2006.02.037 ↗
28. Electrical conductivity of chemically modified multiwalled carbon nanotube/epoxy composites10.1016/j.carbon.2004.08.015 ↗
29. D14 Committee. Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal) n.d. DOI: 10.1520/D1002-10R19.10.1520/D1002-10R19 ↗
30. Percolation and conductivity: A computer study10.1103/PhysRevB.10.1421 ↗
31. Continuum space simulation and experimental characterization of electrical percolation behavior of particulate composites10.1016/0266-3538(93)90165-D ↗
32. Mechanical reinforcement and shape memory effect of graphite nanoplatelet–reinforced epoxy composites10.1177/1045389X14544142 ↗
33. Mechanisms of mechanical reinforcement by graphene and carbon nanotubes in polymer nanocomposites10.1039/C9NR06952F ↗
34. Kalogeras IM, Lobland HEH. The Nature of the Glassy State: n.d.;34.
35. Jayanarayanan K, Rasana N, Mishra RK. Dynamic Mechanical Thermal Analysis of Polymer Nanocomposites. Thermal and Rheological Measurement Techniques for Nanomaterials Characterization, Elsevier; 2017, p. 123–57. DOI: 10.1016/B978-0-323-46139-9.00006-2.10.1016/B978-0-323-46139-9.00006-2 ↗
36. Thermal and mechanical behavior of hybrid polymer nanocomposite reinforced with graphene nanoplatelets10.3390/ma8085262 ↗
37. Hybrid poly(ether ether ketone) composites reinforced with a combination of carbon fibres and graphene nanoplatelets10.1016/j.compscitech.2019.03.006 ↗
38. Viscoelastic properties and lap shear strength of EVA/aromatic hydrocarbon resins as hot-melt adhesives10.1163/156856103322538714 ↗
39. Ojeda CE, Oakes EJ, Hill JR, Aldi D, Forsberg GA. Temperature effects on adhesive bond strengths and modulus for commonly used spacecraft structural adhesives n.d.
40. Ganapathi AS, Shankar SV, Sridhar I, Ng C. Thermo-mechanical de-bonding of composite-titanium single-lap adhesive joints 2017.
41. Adhesives in engineering10.1243/0954410971532703 ↗
42. Single lap joints bonded with structural adhesives reinforced with a mixture of silica nanoparticles and multi walled carbon nanotubes10.1016/j.ijadhadh.2017.10.007 ↗
43. Graphene nanoparticle effect on flexural and shear behaviors of adhesively bonded single lap joints of GFRP composites10.1007/s40430-021-02920-x ↗
44. Nanostructured epoxy adhesives: A review10.1016/j.porgcoat.2019.06.028 ↗
45. Experimental determination of the static and fatigue strength of the adhesive joints bonded by epoxy adhesive including different particles10.1016/j.compositesb.2018.08.006 ↗
46. Ahn · 2000
47. Hocheng · 2011
48. Debonding on demand of adhesively bonded joints: a critical review10.7569/RAA.2019.097304 ↗
49. Banea MD, Da Silva LFM, Campilho RDSG. An overview of the technologies for adhesive debonding on command. The Annals of“ Dunarea de Jos” University of Galati Fascicle XII: Welding Equipment and Technology 2013;24:11–4.
50. Debonding of Structural Adhesive Joints