Segregated poly(vinylidene fluoride)/MWCNTs composites for high-performance electromagnetic interference shielding
Source abstract
Abstract
Abstract Conductive polymer composites (CPCs) that contain a segregated structure have attracted significant attentions because of their promising for fulfilling low filler contents with high electromagnetic interference (EMI) properties. In the present study, segregated poly(vinylidene fluoride) (PVDF)/multi-walled carbon nanotubes (MWCNTs) composites were successfully prepared by mechanical mixing and hot compaction. The PVDF/MWCNTs samples with 7 wt% filler content possess high electrical conductivities and high EMI shielding effectiveness (SE), reaching 0.06 S cm −1 and 30.89 dB (in the X-band frequency region), much higher than lots of reported results for CNT-based composites. And the EMI SE greatly increased across the frequency range as the sample thickness was improved from 0.6 to 3.0 mm. The EMI shielding mechanisms were also investigated and the results demonstrated absorption dominating shielding mechanism in this segregated material. This effective preparation method is simple, low-cost, and environmentally-friendly and has potential industrial applications in the future.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Polymer/carbon based composites as electromagnetic interference (EMI) shielding materials10.1016/j.mser.2013.06.001 ↗
2. A review and analysis of microwave absorption in polymer composites filled with carbonaceous particles10.1063/1.3688435 ↗
3. Ultrathin SWNT films with tunable, anisotropic transport properties10.1002/adfm.201002659 ↗
4. Superior conductive polystyrene – chemically converted graphene nanocomposite10.1039/c1jm11146a ↗
5. Lightweight and anisotropic porous MWCNT/WPU composites for ultrahigh performance electromagnetic interference shielding10.1002/adfm.201503579 ↗
6. The viability and limitations of percolation theory in modeling the electrical behavior of carbon nanotube-polymer composites10.1088/0957-4484/24/15/155706 ↗
7. Three-dimensional flexible and conductive interconnected graphene networks grown by chemical vapour deposition10.1038/nmat3001 ↗
8. Developing polymer composite materials: carbon nanotubes or graphene?10.1002/adma.201301926 ↗
9. A facile route to isotropic conductive nanocomposites by direct polymer infiltration of carbon nanotube sponges10.1021/nn201002d ↗
10. Facile preparation of lightweight microcellular polyetherimide/graphene composite foams for electromagnetic interference shielding10.1021/am303289m ↗
11. The effect of surface chemistry of graphene on rheological and electrical properties of polymethylmethacrylate composites10.1016/j.carbon.2012.06.052 ↗
12. Comparative study of electromagnetic interference shielding properties of injection molded versus compression molded multi-walled carbon nanotube/polystyrene composites10.1016/j.carbon.2012.06.053 ↗
13. Electrical properties and electromagnetic interference shielding effectiveness of multiwalled carbon nanotubes-reinforced EMA nanocomposites10.1002/pc.22167 ↗
14. Structured reduced graphene oxide/polymer composites for ultra-efficient electromagnetic interference shielding10.1002/adfm.201403809 ↗
15. Lowering the percolation threshold of conductive composites using particulate polymer microstructure10.1002/1097-4628(20010425)80:4<692::AID-APP1146>3.0.CO;2-W ↗
16. An innovative method to reduce percolation threshold of carbon black filled immiscible polymer blends10.1016/j.compositesa.2007.10.010 ↗
17. Electrically conductive carbon nanotube/ultrahigh molecular weight polyethylene composites with segregated and double percolated structure10.1016/j.matlet.2012.03.111 ↗
18. Comparison of electrical properties between multi-walled carbon nanotube and graphene nanosheet/high density polyethylene composites with a segregated network structure10.1016/j.carbon.2010.11.013 ↗
19. A strategy to achieve high electromagnetic interference shielding and ultra low percolation in multiwall carbon nanotube-polycarbonate composites through selective localization of carbon nanotubes10.1039/c3ra46480f ↗
20. Electromagnetic interference shielding of segregated polymer composite with an ultralow loading of in situ thermally reduced graphene oxide10.1088/0957-4484/25/14/145705 ↗
21. Facile, green and affordable strategy for structuring natural graphite/polymer composite with efficient electromagnetic interference shielding10.1039/C4RA11332B ↗
22. CNTs/UHMWPE composites with a two-dimensional conductive network10.1016/j.matlet.2008.03.053 ↗
23. Electrically conductive and electromagnetic interference shielding of polyethylene composites with devisable carbon nanotube networks10.1039/C5TC01822F ↗
24. High thermal conductivity of poly(vinylidene fluoride)/carbon nanotubes nanocomposites achieved by adding polyvinylpyrrolidone10.1016/j.compscitech.2014.10.019 ↗
25. Modulation of electromagnetic wave absorption by carbon shell thickness in carbon encapsulated magnetite nanospindles-poly(vinylidene fluoride) composites10.1016/j.carbon.2015.09.036 ↗
26. High-performance microwave absorption of flexible nanocomposites based on flower-like Co superstructures and polyvinylidene fluoride10.1039/C5RA06597F ↗
27. 3D network porous polymeric composites with outstanding electromagnetic interference shielding10.1016/j.compscitech.2016.01.007 ↗
28. Controllable fabrication of CuS hierarchical nanostructures and their optical, photocatalytic, and wave absorption properties10.1002/cplu.201200287 ↗
29. Enhanced wave absorption of nanocomposites based on the synthesized complex symmetrical CuS nanostructure and poly(vinylidene fluoride)10.1039/c3ta00072a ↗
30. Porous carbon nanotube/polyvinylidene fluoride composite material: superhydrophobicity/superoleophilicity and tunability of electrical conductivity10.1016/j.polymer.2014.08.062 ↗
31. Formation of particulate microporous poly(vinylidene fluoride) membranes by isothermal immersion precipitation from the 1-octanol dimethylformamide poly(vinylidene fluoride) system10.1016/S0032-3861(98)00462-5 ↗
32. Tuning of liquid sensing performance of conductive carbon black (CB)/polypropylene (PP) composite utilizing a segregated structure10.1016/j.compositesa.2013.08.001 ↗
33. Electrical conductivity of poly(vinylidene fluoride)/carbon nanotube composites with a spherical substructure10.1016/j.carbon.2009.03.043 ↗
34. Dispersion and rheological aspects of SWNTs in ultrahigh molecular weight polyethylene10.1021/ma051031n ↗
35. Tuning the dielectric properties of polystyrene/poly(vinylidene fluoride) blends by selectively localizing carbon black nanoparticles10.1021/jp310021r ↗
36. Incorporating strong polarity minerals of tourmaline with carbon nanotubes to improve the electrical and electromagnetic interference shielding properties10.1021/jp2121164 ↗
37. Formation of conductive networks with both segregated and double-percolated characteristic in conductive polymer composites with balanced properties10.1021/am500651v ↗
38. Influence of conductive network structure on the EMI shielding and electrical percolation of carbon nanotube/polymer nanocomposites10.1016/j.synthmet.2015.03.032 ↗
39. Effect of particle size ratio on the conducting percolation threshold of granular conductive-insulating composites10.1088/0022-3727/37/13/019 ↗
40. Electrical and thermophysical behaviour of PVC-MWCNT nanocomposites10.1016/j.compscitech.2007.11.014 ↗
41. EMI shielding effectiveness of carbon based nanostructured polymeric materials: a comparative study10.1016/j.carbon.2013.04.008 ↗
42. The influence of single-walled carbon nanotube structure on the electromagnetic interference shielding efficiency of its epoxy composites10.1016/j.carbon.2007.04.016 ↗
43. Temperature dependent microwave absorption of ultrathin graphene composites10.1039/C5TC02185E ↗
44. Reduced graphene oxide deposited carbon fiber reinforced polymer composites for electromagnetic interference shielding10.1016/j.compositesa.2015.12.008 ↗
45. Electromagnetic interference shielding effectiveness of carbon materials10.1016/S0008-6223(00)00184-6 ↗
46. Tough graphene-polymer microcellular foams for electromagnetic interference shielding10.1021/am200021v ↗
47. Efficient electromagnetic interference shielding of lightweight graphene/polystyrene composite10.1039/c2jm32692b ↗
48. Lightweight, multifunctional polyetherimide/graphene@Fe3O4 composite foams for shielding of electromagnetic pollution10.1021/am4036527 ↗
49. Lightweight and flexible graphene foam composites for high-performance electromagnetic interference shielding10.1002/adma.201204196 ↗
50. Ordered mesoporous carbon/fused silica composites10.1002/adfm.200701406 ↗
51. Graphene foam/carbon nanotube/poly(dimethyl siloxane) composites for exceptional microwave shielding10.1016/j.compositesa.2016.03.009 ↗