The Tsai-Wu failure criterion rationalised in the context of UD composites
Source abstract
Abstract
This paper is to rationalise the empirical aspect of the Tsai-Wu failure criterion in the context of UD composites associated with the determination of the interactive strength property F12 based on the analytic geometry. It reveals that the condition of closed failure envelope cannot be satisfied by all UD composites and hence the restriction should be abandoned. Depending on the way the failure envelope opens, UD composites can be classified into two categories. (a) F12 can be determined uniquely using the conventional strength properties with an additional assumption that the material exhibits very high or infinite strength under triaxial compression at a specific stress ratio; or (b) The Tsai-Wu criterion leads to one of the two scenarios: either allowing infinite strength for an in-plane stress state or allowing infinite strength under triaxial stresses involving tension along fibres.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Cellular and Composite Structures · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Hinton MJ, Soden PD, Kaddour AS. Failure criteria in fibre-reinforced-polymer composites. Compos Sci Technol, Part A; 1998:58(7), Part B; 2002:62(12–13), and Part C; 2004:64(3–4).10.1016/S0266-3538(02)00094-5 ↗
2. Kaddour AS, Hinton MJ. Evaluation of theories for predicting failure in polymer composite laminates under 3-D states of stress. J Compos Mater, Part A; 2012:46(19–20), and Part B; 2013:47(6–7).10.1177/0021998312473346 ↗
3. Benchmarking of matrix cracking, damage and failure models for composites: comparison between theories, part A
4. A general theory of strength for anisotropic materials10.1177/002199837100500106 ↗
5. Jones · 1999
6. Abaqus. ABAQUS user's manual, version 6.14; 2014.
7. Hull · 1996
8. Strength of glass-reinforced plastics in the complex stress state
9. Assessment of the fundamentals of failure theories for composite materials10.1016/j.compscitech.2014.10.014 ↗
10. Physical modelling of failure in composites10.1098/rsta.2015.0280 ↗
11. An invariant-based theory of composites10.1016/j.compscitech.2014.06.017 ↗
12. A unit circle failure criterion for carbon fiber reinforced polymer composites10.1016/j.compscitech.2015.12.011 ↗
13. A survey of macroscopic failure criteria for composite materials10.1177/073168448400300102 ↗
14. A progressive quadratic failure criterion, part A10.1016/S0266-3538(96)00141-8 ↗
15. A progressive quadratic failure criterion, part B10.1016/S0266-3538(01)00205-6 ↗
16. Evaluation of the tensor polynomial and hoffman strength theories for composite materials10.1177/002199837701100401 ↗
17. The determination of the normal interaction term in the Tsai-Wu polynomial strength criterion10.1016/0266-3538(87)90014-5 ↗
18. Computational modeling of strand-based wood composites10.1061/(ASCE)0733-9399(2001)127:8(844) ↗
19. “A failure criterion for composites under dimensional state of stress”
20. DeTeresa SJ, Larsen GJ. Derived interaction parameters for the Tsai-Wu tensor polynomial theory of strength for composite materials. In: 2001 American society of mechanical engineers international mechanical engineering congress & exposition, New York, N.Y.; November 11–16, 2001.10.1115/IMECE2001/AMD-25417 ↗
21. Reduction in the number of independent parameters for the Tsai–Wu tensor polynomial theory of strength for composite materials10.1177/002199803035183 ↗
22. Hansen · 1992
23. Residual strength of graphite/MBI composites after long term cyclic compression
24. On the off-axis strength test for anisotropic material10.1177/002199837300700208 ↗
25. Optimal experimental measurements of anisotropic failure tensors10.1177/002199837200600404 ↗
26. BS EN ISO 527. Plastics – determination of tensile properties – Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites; 1997.
27. ASTM D3039/D3039M-14. Standard test method for tensile properties of polymer matrix composite materials; 2014.
28. Non-local damage theory10.1061/(ASCE)0733-9399(1987)113:10(1512) ↗
29. Korn · 1968
30. Tsai · 1980
31. The brittle strength of orthotropic materials10.1177/002199836700100210 ↗
32. Strength prediction of triaxially loaded composites using a progressive damage model based on micromechanics of failure10.1177/0021998312460261 ↗
33. Failure criteria for unidirectional fiber composites10.1115/1.3153664 ↗
34. Failure analysis of FRP laminates by means of physically based phenomenological models10.1016/S0266-3538(96)00140-6 ↗
35. Bridgman PW. Fracture and flow in metals. In: Metals technology, T.P. 1782, The American Institute of Mining and Metallurgical Engineers, New York; Dec. 1944.
36. Hill · 1998