Breaking the strength-ductility trade-off in TiAlZrNbV lightweight multi-principal element alloys via annealing-induced heterostructure
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. The conflicts between strength and toughness10.1038/nmat3115 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
4. Effect of recrystallization and partial remelting on Al15Mg45Li39Ca0.5Si0.5 lightweight high-entropy alloy10.1007/s11665-024-09303-y ↗
5. Alloy design and fabrication of ingots of Al–Mg–Li–Ca light-weight medium entropy alloys10.2320/matertrans.F-M2020825 ↗
6. A novel low-density, high-hardness, high-entropy alloy with close-packed single-phase nanocrystalline structures10.1080/21663831.2014.985855 ↗
7. Ductile Ti1.5ZrNbAl0.3 refractory high entropy alloy with high specific strength10.1016/j.matlet.2021.129428 ↗
8. Lightweight Zr1.2V0.8NbTiAl high-entropy alloys with high tensile strength and ductility10.1016/j.msea.2021.141234 ↗
9. Strength-ductility synergy of Al-bearing low-density refractory TiNbMo0.5Alx medium entropy alloys via precipitation10.1016/j.msea.2022.143072 ↗
10. Microstructure and mechanical properties of lightweight Ti3Zr1.5NbVAlx (x = 0, 0.25, 0.5 and 0.75) refractory complex concentrated alloys10.1016/j.jmst.2022.05.005 ↗
11. Phase inversion in a lightweight high Al content refractory high-entropy alloy10.1016/j.jmst.2022.11.042 ↗
12. Effect of Al on the microstructure, mechanical properties, and wear resistance of TiVZrNbAlx alloys10.1007/s10853-024-09958-x ↗
13. Dynamic mechanical behavior of ultra-high specific strength lightweight Ti61Al16Cr10Nb8V5 multi-principal element alloy10.1016/j.jallcom.2024.174522 ↗
14. Microstructural evolution, mechanical behavior, and deformation mechanisms of a lightweight Ti–Nb–Cr–V refractory high-entropy alloy at room and elevated temperatures10.1016/j.msea.2024.146883 ↗
15. Excellent ductilization and strengthening of lightweight refractory high-entropy alloys via stable B2 nanoprecipitates10.1007/s12598-024-03032-w ↗
16. Substantially improved room-temperature tensile ductility in lightweight refractory Ti-V-Zr-Nb medium entropy alloys by tuning Ti and V content10.1016/j.jmst.2024.04.020 ↗
17. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
18. Multistage work hardening assisted by multi-type twinning in ultrafine-grained heterostructural eutectic high-entropy alloys10.1016/j.mattod.2020.09.029 ↗
19. Achieving superior combined cryogenic strength and ductility in a high-entropy alloy via the synergy of low stacking fault energy and multiscale heterostructure10.1016/j.scriptamat.2023.115809 ↗
20. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
21. Ultrastrong duplex high-entropy alloy with 2 GPa cryogenic strength enabled by an accelerated martensitic transformation10.1016/j.scriptamat.2019.06.026 ↗
22. Real-time observations of TRIP-induced ultrahigh strain hardening in a dual-phase CrMnFeCoNi high-entropy alloy10.1038/s41467-020-14641-1 ↗
23. Simultaneously enhancing strength and ductility of a high-entropy alloy via gradient hierarchical microstructures10.1016/j.ijplas.2019.07.017 ↗
24. Gradient structure design to strengthen carbon interstitial Fe40Mn40Co10Cr10 high entropy alloys10.1016/j.msea.2019.138661 ↗
25. Ultrahigh cryogenic strength and exceptional ductility in ultrafine-grained CoCrFeMnNi high-entropy alloy with fully recrystallized structure10.1016/j.mtnano.2018.12.002 ↗
26. Achieving exceptional strength-ductility synergy in a complex-concentrated alloy via architected heterogeneous grains and nano-sized precipitates10.1016/j.ijplas.2022.103398 ↗
27. Double heterogeneous structures induced excellent strength–ductility synergy in Ni40Co30Cr20Al5Ti5 medium-entropy alloy10.1016/j.jmst.2023.10.011 ↗
28. Strong and ductile medium-entropy alloy via coupling partial recrystallization and hierarchical precipitation10.1016/j.msea.2023.145827 ↗
29. Synergistic enhancement of the strength and ductility of high-entropy alloy at high temperatures via multiple heterogeneous microstructure modulation10.1007/s40843-025-3390-0 ↗
30. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
31. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
32. Electronic-structure methods for materials design10.1038/s41563-021-01013-3 ↗
33. The multi-slit very small angle neutron scattering instrument at the china spallation neutron source10.1107/S1600576724000815 ↗
34. The smearing function for a multi-slit very small angle neutron scattering instrument10.1107/S1600576724009014 ↗
35. Structure and mechanical properties of the AlCrxNbTiV (x = 0, 0.5, 1, 1.5) high entropy alloys10.1016/j.jallcom.2015.08.224 ↗
36. Microstructure and deformation mechanism of TiVAlZrNb lightweight multi-principal element alloy with high specific strength10.1016/j.msea.2025.148617 ↗
37. Grain refinement and wear/corrosion resistance of RPS-TiMN (M = Cr/V) nanocoatings: synergistic regulation by atomic-scale differences and nitridation reaction activity10.1016/j.surfcoat.2025.133062 ↗
38. A ductility metric for refractory-based multi-principal-element alloys10.1016/j.actamat.2023.119104 ↗
39. Alloy design for intrinsically ductile refractory high-entropy alloys10.1063/1.4966659 ↗
40. Ultra-small-angle neutron scattering study on temperature-dependent precipitate evolution in CoCrFeNiMo0.3 high entropy alloy10.1016/j.actamat.2021.117446 ↗
41. A small-angle neutron scattering study of fine-scale NbC precipitation kinetics in the α-Fe–Nb–C system10.1107/S002188980601301X ↗
42. On the validity of simple precipitate size measurements by small-angle scattering in metallic systems10.1107/S0021889811003049 ↗
43. Current research progress in grain refinement of cast magnesium alloys: a review article10.1016/j.jallcom.2014.09.061 ↗
44. Effect of solutes on grain refinement10.1016/j.pmatsci.2021.100809 ↗
45. Designing VxNbMoTa refractory high-entropy alloys with improved properties for high-temperature applications10.1016/j.scriptamat.2020.09.027 ↗
46. Effectively mitigated macro-segregation and improved tensile properties of twin-roll cast Al–Mg–Si (6022) alloy strips via Zr addition10.1016/j.msea.2023.145318 ↗
47. Vacuum arc melted and heat treated AlCoCrFeNiTix based high-entropy alloys: thermodynamic and microstructural investigations10.1016/j.jallcom.2022.163901 ↗
48. Promoted high-temperature strength and room-temperature plasticity synergy by tuning dendrite segregation in NbMoTaW refractory high-entropy alloy10.1016/j.ijrmhm.2023.106469 ↗
49. The effects of grain size, dendritic structure and crystallographic orientation on fatigue crack propagation in IN713C nickel-based superalloy10.1016/j.ijplas.2019.09.010 ↗
50. Mechanism of segregation on the tensile and fracture behaviors of CuSn10P1 alloy10.1016/j.msea.2025.148052 ↗
51. Harnessing competitive interplay between precipitation and lattice distortion for strong and ductile medium-entropy alloy10.1016/j.msea.2025.148642 ↗
52. Enhancing strength-ductility synergy in lightweight complex concentrated alloys via nano-precipitate tailored heterostructures10.1016/j.actamat.2025.121468 ↗
53. Bimodally grained microstructure development during hot extrusion of Mg–2.4Zn–0.1Ag–0.1Ca–0.16Zr (at. %) alloys10.1016/j.actamat.2009.07.057 ↗
54. Strong yet strain-hardenable equiatomic CoCrFeMnNi high-entropy alloys by dynamic heterostructuring10.1016/j.jallcom.2023.171469 ↗
55. High-temperature deformation mechanisms and processing maps of equiatomic CoCrFeMnNi high-entropy alloy10.1016/j.msea.2019.04.057 ↗
56. Enhanced cryogenic tensile properties with multi-stage strain hardening through partial recrystallization in a ferrous medium-entropy alloy10.1016/j.scriptamat.2020.113653 ↗
57. Achieving superior grain refinement and mechanical properties in vanadium through high-pressure torsion and subsequent short-term annealing10.1016/j.msea.2015.12.086 ↗
58. Correlating dislocation mobility with local lattice distortion in refractory multi-principal element alloys10.1016/j.scriptamat.2022.115048 ↗
59. Trade-off between local chemical order and lattice distortion in affecting dislocation motion in NbTiZr multi-principal element alloys10.1016/j.actamat.2024.119910 ↗
60. Effects of grain refinement on the microstructure and tensile behavior of K417G superalloy10.1016/j.msea.2014.11.041 ↗
61. Impact of lattice rotation on dislocation motion10.1103/PhysRevB.93.014107 ↗
62. Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals10.1080/09506608.2016.1191808 ↗
63. A single-phase V0.5Nb0.5ZrTi refractory high-entropy alloy with outstanding tensile properties10.1016/j.msea.2020.139774 ↗
64. Mo and Ta addition in NbTiZr medium entropy alloy to overcome tensile yield strength-ductility trade-off10.1016/j.jmst.2021.08.073 ↗
65. Effects of atomic radius mismatch and burgers vector magnitude on tensile properties of the Ti50-ZrVNbCr medium-entropy alloys10.1016/j.jallcom.2024.175420 ↗
66. Dislocation glide and mechanical twinning in a ductile VNbTi medium entropy alloy10.1016/j.jmst.2021.09.016 ↗
67. Insights into multi-effects of single element Mo in Ti-rich Ti40Nb30V25−xZr5Mox refractory complex concentrated alloys: strength-ductility synergy and high-temperature strengthening10.1016/j.jmst.2025.07.052 ↗
68. Recrystallized hard zone and resultant tri-modal microstructure produces superior mechanical properties in a single-phase heterostructured high-entropy alloy10.1016/j.actamat.2024.119957 ↗
69. Multiscale hierarchical heterostructure yields combined high strength and excellent ductility in a Co-Cr-Fe-Ni-Al negative enthalpy alloy10.1016/j.actamat.2024.120366 ↗
70. Prolonged martensitic transformation induced by heterogeneous deformation in a heterostructured metastable high-entropy alloy10.1016/j.scriptamat.2025.116912 ↗
71. Pursuing ultrastrong and ductile medium entropy alloys via architecting nanoprecipitates-enhanced hierarchical heterostructure10.1016/j.actamat.2023.119492 ↗
72. Heterostructured γ′ precipitates enable simultaneously high strength and ductility in a NiCoCr-based medium entropy alloy10.1016/j.scriptamat.2025.116909 ↗
73. Achieving excellent elevated-temperature mechanical properties in dual-phase high-entropy alloys via nanoscale co-precipitation and heterostructure engineering10.1016/j.actamat.2024.120634 ↗
74. Enhanced ductility via high-density nanoprecipitates driven by chemical supersaturation in a flash-heated precipitation-strengthened high-entropy alloy10.1016/j.actamat.2024.120434 ↗
75. Partially recrystallized heterostructure via Mo-doping endows CoCrNi medium-entropy alloy with exceptional strength and ductility10.1016/j.scriptamat.2024.116297 ↗
76. Discontinuous precipitation enables an exceptional cryogenic strength-strain hardening synergy in a heterostructured medium entropy alloy10.1016/j.actamat.2025.120955 ↗
77. Quad-heterostructure precipitation-strengthened high-entropy alloy overcomes strength-ductility trade-off from cryogenic to intermediate temperatures10.1080/21663831.2025.2465803 ↗
78. Integrating diverse strengtheners empowers a ferrous high-entropy alloy at ambient and elevated temperatures10.1016/j.actamat.2025.121320 ↗
79. Enhancement of strength-ductility trade-off in a high-entropy alloy through a heterogeneous structure10.1016/j.actamat.2018.12.012 ↗
80. In-situ analysis of the tensile deformation modes and anisotropy of extruded Mg-10Gd-3Y-0.5Zr (wt. %) at elevated temperatures10.1016/j.ijplas.2016.06.001 ↗
81. Achieving high strength and ductility in a heterogeneous-grain-structured CrCoNi alloy processed by cryorolling and subsequent short-annealing10.1016/j.msea.2021.141610 ↗
82. The formation of intragranular stress concentration in plastic deformed Ni-base superalloy: governing factors and process10.1016/j.msea.2021.140820 ↗
83. Design for strength-ductility synergy of 316L stainless steel with heterogeneous lamella structure through medium cold rolling and annealing10.1016/j.vacuum.2018.08.049 ↗
84. Microstructural evolution and mechanical behavior of phase reversion-induced bimodal austenitic steels10.1016/j.msea.2019.138669 ↗
85. The impact of annealing temperature on the microstructure - properties relationship of reversion-induced austenitic stainless steels10.1016/j.msea.2022.143100 ↗
86. Mechanism of continuous dynamic recrystallization of Ti−6Al−4V alloy during superplastic forming with sub-grain rotation10.1016/S1003-6326(23)66145-X ↗
87. Superior strength and ductility of 316L stainless steel with heterogeneous lamella structure10.1007/s10853-018-2322-4 ↗
88. Formation mechanisms of heterostructures in 304L stainless steel processed by cold rolling and annealing10.1016/j.vacuum.2024.113104 ↗
89. A grain refinement mechanism of cast commercial purity aluminium by vanadium10.1016/j.matchar.2021.111468 ↗
90. Heterostructured materials10.1016/j.pmatsci.2022.101019 ↗
91. Hall–Petch relation and boundary strengthening10.1016/j.scriptamat.2004.06.002 ↗
92. Measurement of stored energy in Fe–48 %Ni alloys strongly cold-rolled using three approaches: neutron diffraction, dillamore and KAM approaches10.1016/j.msea.2014.07.037 ↗
93. Perspective on hetero-deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗
94. Heterogeneous materials: a new class of materials with unprecedented mechanical properties10.1080/21663831.2017.1343208 ↗
95. Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility10.1073/pnas.1517193112 ↗
96. Towards strength–ductility synergy through the design of heterogeneous nanostructures in metals10.1016/j.mattod.2017.02.003 ↗
97. Ductility and strain hardening in gradient and lamellar structured materials10.1016/j.scriptamat.2020.05.025 ↗
98. Geometrically necessary dislocation and size-dependent plasticity10.1016/S1359-6462(02)00329-9 ↗
99. CALPHAD-aided design for superior thermal stability and mechanical behavior in a TiZrHfNb refractory high-entropy alloy10.1016/j.actamat.2023.118728 ↗
100. Theory of dislocations10.1115/1.3167075 ↗