Correlation between microstructure and ionic conductivity in titanium-doped lithium tantalum phosphate (LiTa2PO8) ceramics
Source abstract
Abstract
LiTa 2 PO 8 (LTPO) is considered as a promising candidate for application as a solid electrolyte in Li-ion technology, owing to its high grain conductivity, exceeding 1 mS/cm, and total ionic conductivity values that approach the bulk conductivity at room temperature. In this study, we investigate the effect of titanium doping on the structural, microstructural, and electrical characteristics of LTPO ceramics prepared at various sintering temperatures. While the introduction of Ti dopant into the LTPO crystal structure did not significantly alter the grain conductivity, which remained consistent at approximately 1–2 mS/cm, it induced notable changes in the microstructure and phase purity, influencing total electrical properties. However, the effect of Ti doping on total ionic conductivity was found to be less pronounced compared to the influence of the sintering process. Among the investigated samples, those sintered at 1200 °C exhibited the highest total ionic conductivity, reaching 0.49 mS/cm, highlighting the critical role of sintering temperature in optimizing the material's electrical performance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. The role of metal substitutions in the development of Li batteries, part II: solid electrolytes10.1039/D1MA00082A ↗
2. Approaching practically accessible solid-state batteries: stability issues related to solid electrolytes and interfaces10.1021/acs.chemrev.9b00268 ↗
3. Recent progress in solid electrolytes for energy storage devices10.1002/adfm.202000077 ↗
4. Flexible and stretchable energy storage: recent advances and future perspectives
5. Challenges for and pathways toward li-metal-based all-solid-state batteries10.1021/acsenergylett.1c00445 ↗
6. Lithium metal anodes: present and future10.1016/j.jechem.2019.12.024 ↗
7. Oxide electrolytes for lithium batteries10.1111/jace.13844 ↗
8. A new crystalline LiPON electrolyte: synthesis, properties, and electronic structure10.1016/j.ssi.2012.12.013 ↗
9. Studies on electrical properties of composites based on lithium titanium phosphate with lithium iodide10.1016/j.ssi.2016.12.007 ↗
10. Effect of addition of LiAlSiO4 on microstructure, phase composition, and electrical properties of Li1.3Al0.3Ti1.7(PO4)3-based solid electrolyte10.1016/j.ceramint.2024.01.154 ↗
11. Improving interfaces in all-solid-state supercapacitors using polymer-added activated carbon electrodes10.3390/batteries9020081 ↗
12. Highly conductive lithium aluminum germanium phosphate solid electrolyte prepared by sol-gel method and hot-pressing10.1016/j.ssi.2020.115320 ↗
13. Challenges and perspectives of NASICON-type solid electrolytes for all-solid-state lithium batteries10.1088/1361-6528/ab5be7 ↗
14. Ionic and electronic conductivity of solid electrolyte Li0.5La0.5TiO3 doped with Li2O-SiO2-B2O3 glass10.1016/j.jallcom.2017.12.361 ↗
15. Advances in solid lithium ion electrolyte based on the composites of polymer and LLTO/LLZO of rare earth oxides10.1002/eng2.12448 ↗
16. Designing inorganic electrolytes for solid-state Li-ion batteries: a perspective of LGPS and garnet10.1016/j.mattod.2021.03.013 ↗
17. Sulfide and oxide inorganic solid electrolytes for all-solid-state li batteries: a review10.3390/nano10081606 ↗
18. A bird’s-eye view of Li-stuffed garnet-type Li7La3Zr2O12 ceramic electrolytes for advanced all-solid-state Li batteries10.1039/C9EE01548E ↗
19. Garnet-type solid-state electrolytes: materials, interfaces, and batteries10.1021/acs.chemrev.9b00427 ↗
20. Solid-state reactive sintering of dense and highly conductive Ta-doped Li7La3Zr2O12 using CuO as a sintering aid10.1007/s10853-020-05221-1 ↗
21. LiTa2PO8: a fast lithium-ion conductor with new framework structure10.1039/C8TA09170F ↗
22. Structural and Li-ion diffusion properties of lithium tantalum phosphate LiTa2PO810.1016/j.ssi.2020.115314 ↗
23. Li-ion conductivity and stability of hot-pressed LiTa2PO8 solid electrolyte for all-solid-state batteries10.1007/s10853-020-05324-9 ↗
24. Excess Li2O additives to promote grain boundary growth and improve ionic conductivity of LiTa2PO8 solid electrolytes
25. Computational design and experimental synthesis of air-stable solid-state ionic conductors with high conductivity10.1021/acs.chemmater.1c01837 ↗
26. Polymorphism and sodium-ion conductivity of NaTa2PO8 synthesized via the Li+/Na+ ion-exchange reaction of LiTa2PO810.1016/j.ceramint.2022.04.052 ↗
27. Theoretical Insights into Li-Ion Transport in LiTa2PO810.1021/acs.jpcc.9b03313 ↗
28. Temperature Dependence of Structure and Ionic Conductivity of LiTa2PO_ Ceramics10.1021/acs.chemmater.2c02640 ↗
29. Novel fast lithium-ion conductor LiTa2PO8 enhances the performance of poly(ethylene oxide)-based polymer electrolytes in all-solid-state lithium metal batteries10.1016/j.cclet.2021.12.022 ↗
30. Te doping effect on the structure and ionic conductivity of LiTa2PO8 solid electrolyte10.1016/j.ceramint.2022.09.163 ↗
31. Effect of the Li2O-B2O3-Li2SO4 amorphous boundary layer on the ionic conductivity and humidity stability of the LiTa2PO8 solid electrolyte
32. Influence of the cold sintering process and post annealing on the microstructure and Li-ion conductivity of LiTa2PO8 solid electrolyte10.1016/j.ceramint.2022.10.107 ↗
33. B2O3 as an effective sintering aid in enhancing the lithium-ion conductivity of LiTa2PO8 solid electrolyte10.1016/j.jpowsour.2023.233229 ↗
34. Enhanced grain boundary ionic conductivity of LiTa2PO8 solid electrolyte by 75Li2O-12.5B2O3-12.5SiO2 sintering additive10.1016/j.jeurceramsoc.2023.03.046 ↗
35. Characterization of Ce-doped LiTa2PO8 with improved stability to lithium and ionic conductivity10.1016/j.est.2023.108080 ↗
36. Lithium mobility along conduction channels of ceramic LiTa2PO810.1016/j.jeurceramsoc.2023.05.013 ↗
37. Liquid-like Li-ion conduction in oxides enabling anomalously stable charge transport across Li/electrolyte interface in all-solid-state batteries10.1002/adma.202303730 ↗
38. LiTa2PO8-based polymer-ceramic electrolyte paved the way to high-performance solid-state lithium metal batteries10.1021/acs.energyfuels.4c01520 ↗
39. Superior ionic conductivity of Zr-doped LiTa2PO8 ceramics10.1016/j.actamat.2024.120125 ↗
40. High total Li-ion conductivity of LiTa2PO8 ceramics sintered using Bi2O3 as an additive10.1016/j.ceramint.2024.07.269 ↗
41. Effect of synthesis process on the Li-ion conductivity of LiTa2PO8 solid electrolyte materials for all-solid-state batteries10.1039/D4YA00180J ↗
42. Toxic solvent-free low-temperature fabrication and electrochemical performance of LiTa2PO8 ceramic matrix-based composite solid electrolytes containing polyvinylidene fluoride10.1016/j.ceramint.2023.10.249 ↗
43. Improving the stability of ceramic-type lithium tantalum phosphate (LiTa2PO8) solid electrolytes in all-solid-state batteries10.1016/j.est.2023.110254 ↗
44. A comparative study of LiTa2PO8 ceramics prepared with different lithium sources
45. Improvement of lithium-ion conductivity by Hf substitution in lithium tantalum phosphate (LiTa2PO8) solid electrolyte10.1021/acsaem.4c01773 ↗
46. Modelling one- and two-dimensional solid-state NMR10.1002/mrc.984 ↗
47. Multi-device software for impedance spectroscopy measurements with stabilization in low and high temperature ranges working under linux environment10.1007/s11581-019-02950-5 ↗
48. NMR investigations in Li1.3Al0.3Ti1.7(PO4)3 ceramics. Part I: structural aspect10.1021/acs.jpcc.6b06764 ↗
49. NMR investigations in Li1.3Al0.3Ti1.7(PO4)- ceramics Part III: local dynamical aspect seen from aluminum and phosphorus sites10.1021/acs.jpcc.6b11712 ↗
50. Modeling Ti/Ge distribution in LiTi2-xGex(PO4)3 NASICON series by 31P MAS NMR and first-principles DFT calculations10.1021/jacs.6b03583 ↗
51. Structural study, 31P NMR and europium photoluminescence properties of a new synthetic fillowite-type phosphate: na3SrMg11(PO4)910.1016/j.solidstatesciences.2017.03.007 ↗
52. 31P nmr study of I-IV group polycrystalline phosphates10.1016/0022-3697(86)90022-3 ↗
53. Cation effects on 31P MAS NMR chemical shifts of metaphosphate glasses10.1111/j.1151-2916.1991.tb04099.x ↗
54. Impact of Li2.9B0.9S0.1O3.1 glass additive on the structure and electrical properties of the LATP-based ceramics10.1016/j.jallcom.2019.153072 ↗
55. Structural and mechanistic insights into fast lithium-ion conduction in Li4SiO4-Li3PO4 solid electrolytes10.1021/jacs.5b04444 ↗
56. Local structure of glassy lithium phosphorus oxynitride thin films: a combined experimental and ab initio approach10.1002/ange.202009501 ↗
57. Structural features of (Li,Na,K)PO3 mixed alkali metaphosphate glass for significant anisotropy10.1111/jace.18063 ↗
58. Cation miscibility and lithium mobility in NASICON Li1+xTi2-xScx(PO4)3 (0 ≤ x ≤ 0.5) series: a combined NMR and impedance study10.1021/acs.inorgchem.6b02274 ↗
59. Raman-scattering study of LiH2PO4
60. X-ray diffraction and Raman scattering study of SrBi2Ta2O9 ceramics and thin films with Bi3TiNbO9 addition10.1063/1.1421642 ↗
61. In situ raman study of phase stability of α-Li3V2(PO4)3 upon thermal and laser heating10.1021/jp403282a ↗
62. Characterization of K6Ta10.8O30 microrods with tetragonal tungsten bronze-like structure obtained from tailings from the penouta Sn-Ta-Nb deposit10.3390/nano10112289 ↗
63. Proton conductor NASICON-structure Li1+xCdx/2Zr2−x/2(PO4)3 as solid electrolyte for intermediate-temperature fuel cells10.1039/D3TA05182J ↗
64. Raman and FTIR spectroscopy study of LiFeTiO4 and Li2FeTiO410.1007/s11581-016-1740-z ↗
65. Synthesis of Cubic Li7La3Zr2O12 Doped with Hf and W using metal alkoxide derived sol-gel precursors
66. Electroceramics: characterization by impedance spectroscopy10.1002/adma.19900020304 ↗