Thermal spin-torque heat-assisted magnetic recording

To achieve higher recording density with lower power consumption than the current heat-assisted magnetic recording (HAMR) for next-generation, a more efficient writing with less laser power would be indispensable. An advanced HAMR concept is developed to address such specification, and the write ability has been demonstrated in multilayer media stacks comprising the core structures of antiferromagnetic MnPt and ferromagnetic FePt layers with the magnetic easy axis oriented perpendicular to the film plane. The concept is based on two distinct switching mechanisms: thermally activated (TA) and spin-transfer-torque (STT) assisted magnetization switching. The latter is driven by an out-of-plane temperature gradient ( ΔT ) in the MnPt/FePt multilayer which is referred as thermal spin-torque (TST) HAMR media. Pump-probe measurements reveal significant magnetic coercivity ( H c ) modulation by ΔT at the local magnetization of the FePt layer. The hybrid mechanism with TA and STT can be separated by sweeping the delay time between the pump and probe laser pulses, and it is found that the STT dominates the mechanism for H c modulation in the short delay time regime. Furthermore, the modulation of H c of the FePt layer is demonstrated to be dependent on the magnitude and the direction of steady state ΔT . These results suggest that lower laser power consumption is achievable owing to the contribution of STT assisted switching in the TST-HAMR media.