Chemical order/disorder phase transitions in NiCoFeAlTiB multi-principal element alloys: A Monte Carlo analysis
Source abstract
Abstract
Multi-principal element solid solutions are prone to develop local chemical inhomogeneities, e.g., chemical order/clustering and/or compositional undulation. To model the structural transformation of complex multi-principal element alloys (MPEAs), a flexible pairwise-energy model is developed. Lattice Monte Carlo (MC) simulations, coupled with discrete atomic pair energies, are extensively conducted to investigate thermodynamic atomic structures of NiCoFe-based alloys. The results of simulations are consistent with reported experimental data and provide insights into phase decomposition, species segregation/preferences, and chemical order/disorder. The simulations also offer microscopic views of atomic segregation by incorporating small atom (e.g., Boron) at grain boundaries. By employing Cahn’s wetting theory, the observed phase transformation processes, ranging from perfect to partial/pre-wetting, are explained and validated thermodynamically by the model. The current approach has the potential to be extended to a variety of MPEA systems with constant lattices.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Intermetallics and Advanced Alloy Properties · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Ab initio phase stabilities and mechanical properties of multicomponent alloys: A comprehensive review for high entropy alloys and compositionally complex alloys10.1016/j.matchar.2018.06.019 ↗
2. Tailoring heterogeneities in high-entropy alloys to promote strength–ductility synergy10.1038/s41467-019-13311-1 ↗
3. High entropy alloys: A focused review of mechanical properties and deformation mechanisms10.1016/j.actamat.2019.12.015 ↗
4. A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength10.1126/sciadv.aat8712 ↗
5. Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys10.1126/science.aas8815 ↗
6. Ultrahigh-strength and ductile superlattice alloys with nanoscale disordered interfaces10.1126/science.abb6830 ↗
7. A high-entropy alloy with dislocation-precipitate skeleton for ultrastrength and ductility10.1016/j.actamat.2022.117975 ↗
8. Atom probe tomography study of an Fe25Ni25Co25Ti15Al10 high-entropy alloy fabricated by powder metallurgy10.1016/j.actamat.2019.08.047 ↗
9. Complete and incomplete wetting of ferrite grain boundaries by austenite in the low-alloyed ferritic steel10.1007/s11665-012-0130-6 ↗
10. Nanocrystalline Fe–C alloys produced by ball milling of iron and graphite10.1016/j.actamat.2013.02.006 ↗
11. Grain boundary wetting by a solid phase; microstructural development in a Zn–5 wt% Al alloy10.1016/j.actamat.2004.06.011 ↗
12. Critical point wetting10.1063/1.434402 ↗
13. An interface phase transition: Complete to partial wetting10.1126/science.207.4435.1073 ↗
14. Elemental partitions and deformation mechanisms of L12-type multicomponent intermetallics10.1016/j.actamat.2021.117238 ↗
15. Chemical short range order strengthening in a model FCC high entropy alloy10.1016/j.actamat.2020.02.041 ↗
16. Cluster-expansion model for complex quinary alloys: Application to AlNiCo permanent magnets10.1103/PhysRevApplied.8.054016 ↗
17. Long-ranged interactions in BCC NbMoTaW high-entropy alloys10.1080/21663831.2016.1198837 ↗
18. Impact of lattice relaxations on phase transitions in a high-entropy alloy studied by machine-learning potentials10.1038/s41524-019-0195-y ↗
19. Robust data-driven approach for predicting the configurational energy of high entropy alloys10.1016/j.matdes.2019.108247 ↗
20. Machine learning for high-entropy alloys: Progress, challenges and opportunities
21. Modeling the structure and thermodynamics of high-entropy alloys10.1557/jmr.2018.222 ↗
22. Ground state searches in FCC intermetallics10.1557/PROC-253-243 ↗
23. Predictive multiphase evolution in Al-containing high-entropy alloys10.1038/s41467-018-06757-2 ↗
24. First-principle study of interstitial atoms (C, B and Si) in CrFeCoNi high entropy alloy
25. Calculation of order parameters in a binary alloy by the Monte Carlo method10.1103/PhysRev.116.565 ↗
26. Database-driven semigrand canonical Monte Carlo method: Application to segregation isotherm on defects in alloys10.1103/PhysRevE.104.025310 ↗
27. Direct determination of phase coexistence properties of fluids by Monte Carlo simulation in a new ensemble10.1080/00268978700101491 ↗
28. Statistical theory of superlattices
29. Local chemical inhomogeneities in TiZrNb-based refractory high-entropy alloys10.1016/j.jmst.2022.06.047 ↗
30. Effect of Re content on the γ/γ′ interface: A Monte Carlo simulation10.1016/j.commatsci.2014.03.019 ↗
31. Thermodynamic assessment of the Al–Ni system10.1016/S0925-8388(96)02652-7 ↗
32. Multiscale ab initio simulation of Ni-based alloys: Real-space distribution of atoms in γ+γ′ phase10.1016/j.commatsci.2015.06.029 ↗
33. Site occupancy of alloying elements in γ′ phase of nickel-base single crystal superalloys10.1016/j.intermet.2020.106772 ↗
34. A mechanically strong and ductile soft magnet with extremely low coercivity10.1038/s41586-022-04935-3 ↗
35. Atomic origins of the plastic deformation micro-mechanisms of γ/γ′ FeCoNiAlTi high-entropy alloys10.1016/j.ijplas.2022.103439 ↗
36. Microstructural and compositional design principles for Mo-V-Nb-Ti-Zr multi-principal element alloys: A high-throughput first-principles study10.1016/j.actamat.2021.116958 ↗
37. Synergistic effect of Ti and Al on L12-phase design in CoCrFeNi-based high entropy alloys10.1016/j.intermet.2019.106476 ↗
38. Control of nanoscale precipitation and elimination of intermediate-temperature embrittlement in multicomponent high-entropy alloys10.1016/j.actamat.2020.02.059 ↗
39. Diffuse interface model for structural transitions of grain boundaries10.1103/PhysRevB.73.024102 ↗
40. Grain boundary transitions in binary alloys10.1103/PhysRevLett.97.075502 ↗
41. Solid-state wetting transitions at grain boundaries10.1016/j.msea.2007.09.091 ↗
42. Grain boundary complexions10.1016/j.actamat.2013.07.037 ↗
43. Phase transformations and mechanical behavior in a non-equiatomic Ti10Fe30Co30Ni30 medium-entropy alloy10.1016/j.msea.2021.142429 ↗
44. The effects of prewetting and wetting transitions on the surface energy of liquid binary alloys10.1016/S1359-6454(98)80015-3 ↗
45. First-order interfacial transformations with a critical point: Breaking the symmetry at a symmetric tilt grain boundary10.1103/PhysRevLett.120.085702 ↗
46. Grain boundary disordering in binary alloys10.1063/1.2892631 ↗
47. Liquid-like interface complexion: From activated sintering to grain boundary diagrams10.1016/j.cossms.2008.12.001 ↗
48. Developing grain boundary diagrams as a materials science tool: A case study of nickel-doped molybdenum10.1103/PhysRevB.84.014105 ↗
49. Effects of sintering aids on the densification of Mo–Si–B alloys10.1007/s10853-012-6815-2 ↗
50. Magnetically-driven phase transformation strengthening in high entropy alloys10.1038/s41467-018-03846-0 ↗
51. Strengthening in multi-principal element alloys with local-chemical-order roughened dislocation pathways10.1038/s41467-019-11464-7 ↗
52. De Boer · 1988
53. Grain boundary structure and mobility in high-entropy alloys: A comparative molecular dynamics study on a Σ11 symmetrical tilt grain boundary in face-centered cubic CuNiCoFe10.1016/j.actamat.2019.12.031 ↗
54. Grain boundary segregation-induced strengthening-weakening transition and its ideal maximum strength in nanopolycrystalline FeNiCrCoCu high-entropy alloys10.1016/j.ijmecsci.2022.107828 ↗